UAL / CL1 HPS MH 600W 400V - ETI, S.A.

NFNNFUAL / CL1 HPS MH 600W 400VCompact Control Gear for H.I.D. LampsEd. 124/09/10UNIDAD DE ALIMENTACIONUAL T C / CL1 VS HM 150WPara lámparas VSAP y HM 150W / 1,8A32 42C1 305 307 08Made in SpainVHzA230500,780,9F F 2,5LRLAUAL T Ctwta (máx)13055VSAP 20m / HM 2mF FNN LR LAD2B CD1AMain featuresCompact units, with the generic denomination of UAL / CL1, have been designed for incorporated use in luminaries orwatertight boxes.Internally, all the necessary elements (Ballast, ignitor and capacitor) are incorporated and connected to adequately drivethe specified lamp types. Only low t ballasts are used for their construction.Depending on the type, these units can feature thermal protector and/or cyclic pulse type timed ignitor.Advantages of UAL / CL1 integrated compact sets compared to traditional unassembled elementssystems:- The use of compact control gear units avoids the tiresome and expensive task of having to connect the equipment’sconstitutive elements. Also connection mistakes and their difficult checking are avoided.- Space advantage is also a fact when UAL / CL1 compact units are used, as the required volume inside the luminaireis minimum due to their compact construction. There is no need for extra fixation or connection accessories(Terminal blocks, metal boards), because these elements are also incorporated, due to the design of these units.Optional incorporated protections in UAL unitsThermal protection: Some HID lamp types can develop intensity rectifying effect at the end of their life, when they areexhausted. This leads to a great increase of control gear heat. This phenomenon is practically nonexistent in HPS lamps,and is more frequent in MH lamps.UAL T / CL1 and UAL TT / CL1 types incorporate an auto resettable thermal switch for overheating protection.When the internal temperature rises over a safety limit, the thermo switch is activated and disconnects the ballast frommains, to minimise damages to lamp associated electric components.For indoor installations with MH lamps (Department stores, shops, showcases, etc.) we thoroughly recommend the useof units featuring thermal protection.Both types UAL T / CL1 and UAL TT / CL1 incorporate thermal protectors. UAL / CL1 (without thermal protector) is alsoavailable as a special version.Timed ignitor : UAL TT / CL1 units incorporate a digitally controlled pulse (DCP) ignition sequence which allows pausesfor lamp cooling. This model is specially recommended for lamp types which struggle to hot restrike (Ceramic burner MH35, 70, 100 and 150W), and for installations without maintenance.

UAL / CL1 HPS MH 600W 400VCompact Control Gear for H.I.D. LampsEd. 124/09/10The use of these cyclic timed ignitor units prevents damages to lamp and control gear components during hot lamprestrikes, after mains failure. In these circumstances high voltage ignition attempts will be limited to a maximum durationof 25 minutes, avoiding useless tiring of control gear with exhausted lamps, which can not restrike.UAL / CL1600WT 600WTT 600WLamps - HPS & MHFormat - EI-17Lamp intensity A 3,62Line voltage () V 400Line frequency () Hz 50Line intensity A 1,8Power factor - > 0,9Mechanical DataApprovalsStandardsABCD1D2Dimensionsmm2251058721672Approximate weight: 6,80 KgPendingEN 60598-2-1, EN 60922,EN 60923, EN 61347-2-9Ignition peak voltage Kv 5Ignitor load capacity pF 20-2000Distance to lampmMH 2HPS 10t w (Bal.) ºC 130t a max. ºC 40ManufacturematerialsCoreCoil baseWire insulationImpregnationcompoundSilicon SteelPolyamide with F.G.30%Class 200ºCGrade IIEpoxy resin class180ºCIP - 20Max. wire section mm 2 2,5RAEEExempted productMax. number of unitsinterconnected- 4Thermal protection - Featured in T and TT typesWaste disposal /EnvironmentnormativesWEEERoHSExempted productCompliantCyclic timed ignitor - Only featured in TT typesREACHCompliant() For other line voltages or frequencies please contact our Commercial Department.Earth connection of these units can be done by use of metallic screw and dented pressure washer at any of its fixing points.Copyright ETI,S.A. 2010