TERMS AND CONDITIONSWORKSTATIONS/DESKINGTABLES EDUCATIONALTABLESSEATING PANELS DIMENSIONS & SPACEREQUIREMENTS INDEXFreight rates are subject to change without notice and apply to shipmentsin the U.S. only. Please note any special delivery needs on your purchaseorder. <strong>ABCO</strong> will work with your company and the freight carrier to try andaccommodate your delivery needs. <strong>ABCO</strong> will make every effort to work withthe freight carriers but cannot be responsible for delivery schedule.<strong>ABCO</strong> can also accommodate collect shipments and third party billing at noadditional charge. UPSable items are denoted by an asterisk (*). <strong>ABCO</strong> cannotbe responsible for damage to items not approved for small package deliveryby UPS. Prepaid orders cannot be split shipped or shipped with differentdates. Weights and cube values are approximate.Freight Responsibility and ClaimsCarrier routing will be determined by <strong>ABCO</strong> on all prepaid or prepaid and addorders. When the customer selects the carrier, <strong>ABCO</strong> is not responsible for theservices provided by that carrier. Customer selected carrier shipments will beshipped collect or third party based on the customer’s instructions.<strong>ABCO</strong> has made special arrangements with selected freight companies for thehandling of freight damage claims. All <strong>ABCO</strong> shipments are put on the freightline free from damage and are signed for as such by the carrier’s agent. <strong>ABCO</strong>’sresponsibility for the product’s safe delivery ceases at this point and responsibilityis assumed by the carrier. As a service, <strong>ABCO</strong> will file freight claims for F.O.B.origin, prepaid and prepaid and add shipments under the following conditions:Any shipments received with shortages must be noted “short” on the bill oflading and signed by the receiving agent as well as the carrier. Any shipmentsreceived with visible carton damage must be inspected immediately todetermine if there is product damage. If there is product damage, refuse only thecartons containing damaged products. The applicable products must be noted“damaged and refused” on the bill of lading and signed by the receiving agentas well as the carrier.Notification of any claim activity that results from damage should be reportedto <strong>ABCO</strong> Customer Service immediately. Failure to notify <strong>ABCO</strong> within 10calendar days of any damages will constitute a waiver of claim. This appliesto both obvious and concealed damage. Replacement orders may be subjectto <strong>ABCO</strong>’s inspection of refused products. Freight claims for third party and/or collect shipments are the responsibility of the customer. Contact CustomerService at (800) 336-0070 if shipment is not received within 10 days of shipment.ReturnsReturned merchandise will not be accepted without written approval from <strong>ABCO</strong>Customer Service on a Return Authorization (RA) form. Once an RA is approved,merchandise must be returned to <strong>ABCO</strong> prepaid, in the original cartons (withproper inner packing), addressed with return labels and accompanied by acopy of the RA form. <strong>ABCO</strong> will refuse shipments of returned goods that donot meet these criteria. A minimum 45% restocking fee will be applicable forall approved returns. If the original shipment was shipped prepaid by <strong>ABCO</strong>,freight charges will also be due for the original shipment. <strong>ABCO</strong> WILL NOTACCEPT RETURNS FOR THE FOLLOWING UNDER ANY CIRCUMSTANCES:• Custom Items• Items shipped as acknowledged on an <strong>ABCO</strong> Order Verification• Items that have been fully or partially assembled• Duplicate orders due to duplicate customer purchase orders• Items invoiced more than 60 days ago• Items received at <strong>ABCO</strong> 45 days or more after issuance of RACancellationsOrders entered and verified may not be cancelled or changed without receipt ofa written cancellation request and <strong>ABCO</strong>’s consent. A cancellation or changecharge of 30% will be applied to orders cancelled or changed while inproduction (verification date to ship date). Orders for custom items orproducts with custom laminate colors may not be cancelled or changed.Please see “Returns Policy” to cancel an order that has been shipped fromthe factory.PostponementsRequests for postponement of shipment beyond the scheduled and verifiedship date will be subject to a 25% holding and handling charge. Under nocircumstances will orders be held more than 10 days past the scheduled andacknowledged ship date.Repair and ReplacementAny labor charges for correcting a manufacturing problem for a product underwarranty must be submitted in writing and approved by <strong>ABCO</strong> Customer Serviceprior to corrective action. Labor charges will not be paid if the estimate was notsubmitted and approved prior to labor being completed.Warranty<strong>ABCO</strong> hereby warrants to the original purchaser that the productsmanufactured by it shall be free of all substantial defects in original materialand workmanship under normal use in standard office conditions for a periodof ten (10) years (exception: one (1) year for Folding Tables/Trucks from thedate of purchase. All fabrics, upholstery materials and all other products*sold through <strong>ABCO</strong>, but not manufactured by <strong>ABCO</strong>, are warranted to theoriginal purchaser for a period of one (1) year from the date of purchase.Within the specified periods of this warranty, <strong>ABCO</strong> agrees, at our option, torepair, replace or refund the cost of the product or any portion of the subjectproduct which proves to be defective in material or workmanship, providedthat the buyer gives written notice. <strong>ABCO</strong> does not warrant the matchingof color, grain or texture. This warranty does not apply to: normal wear andtear, damages resulting from shipment, storage, alteration, misuse of theproduct or failure to provide proper care as well as reasonable and necessarymaintenance or damage caused during product installation or reconfig uration.Additionally, all custom products are expressly excluded from this warranty.This expressed warranty is exclusive of all other warranties, expressed orimplied, including without limitation any implied warranty of merchantability orfitness for a particular purpose. <strong>ABCO</strong> shall be liable under this warranty onlyfor the cost or, at our option, the replacement or repair of defective products.Authorization must be approved from <strong>ABCO</strong> in writing prior to incurring anyrepair charges. All incidental or consequential damages which may arise,including but not limited to, business losses, personal damage and third partyliability are hereby expressly excluded.*Products sold through <strong>ABCO</strong> but not manufactured by <strong>ABCO</strong> are:• Privacy Panel Accessory Bars and Accessories (MAB, MLT, MPO, MTP)• Task Lights (MTCTL, MTL, TL)• Articulating Keyboards, Vertical and Mobile CPU Holders (MFAKB,MFAKBMP, MPFAKB, MVCPU, MVCPUNS, FAKB, FAKBMP, PFAKB, VCPU,VCPUNS, MCPU)• Power/Data Modules (POWER, CPOWER, SPOWER)• Modular Electrical System Components (MEPMA, MEPDMA, MEJ, MER, MEPF)• Casters• Power & Data ComponentsCalifornia Shipments<strong>ABCO</strong> will charge California sales tax on all invoices to any dealer that requests<strong>ABCO</strong> ship directly to the State of California, but cannot provide a validCalifornia resale certificate.Giza<strong>ABCO</strong> provides office layout services utilizing Giza software free of charge. Pleasefax request to the Custom/Quotation department at (800) 992-2261 along with allnecessary information including:• Rough Sketch of the Layout• Complete Room Dimensions• Type of Product to be Used• List of any Accessories• Design Specifications• Other Pertinent Information that will Assist in Completion of the DrawingCopyrightAll material in this publication is protected under copyright.180 Dimensions & Space Requirements2011 <strong>ABCO</strong> Price Guide 800.336.0070
GENERAL PRODUCT INFORMATIONDIMENSIONSFinished size dimensions are 1/4” to 1/2” less than the stated depth, width and height. The reason for this is to allow for the cutting andfinishing process. Because of <strong>ABCO</strong>’s wide selection of finishes and edge styles, the true dimensions will vary. If an exact size is needed,please contact <strong>ABCO</strong>’s Custom/Quotation department for the upcharge and additional lead times.WORKSTATIONS/DESKINGASSEMBLY<strong>ABCO</strong> products are shipped RTA – ready to be assembled unless “fully assembled” is noted in product features.EDGE SELECTIONSCheck chart for availability. Edge options vary by product.TYPE:TYPE:TYPE:TYPE:(B) Bullnose EdgeColors: Solids: BlackWoodgrains: Not AvailableNebulas: Not Available(E) Self EdgeColors: Solids: Black, Dove Grey, Khaki, Slate GreyWoodgrains: Art Cabin Oak, Empire Mahogany, Fusion Maple, Golden Oak, Huntington Maple,Montana Walnut, Monticello Maple, Natural Pear, Versailles Anigre, Wild CherryPatterns: Bronze Legacy, Evening Tigris, Graphite Nebula, Grey Nebula, Olive Legacy, Pewter Brush,Silicon Ev, Titanium Ev(T) Smooth T-Mold Edge (colors vary by product series)Colors: Solids: Black, Dove Grey, Khaki, Slate GreyWoodgrains: Art Cabin Oak, Empire Mahogany, Golden Oak, Montana Walnut, Wild CherryPatterns: Not Available(F) Fluted T-Mold EdgeColors: Solids: Black, Dove Grey, Khaki, Slate GreyWoodgrains: Not AvailablePatterns: Not Available(S) Single Groove T-Mold EdgeColors: Solids: Black, Dove Grey, Khaki, Slate GreyWoodgrains: Not AvailablePatterns: Not Available(M) 3mm Edge (colors vary by product series)Colors: Solids: Black, Dove Grey, Khaki, Slate GreyWoodgrains: Art Cabin Oak, Empire Mahogany, Fusion Maple, Golden Oak, Huntington Maple,Montana Walnut, Monticello Maple, Natural Pear, Versailles Anigre, Wild CherryPatterns: Bronze Legacy, Evening Tigris, Graphite Nebula, Grey Nebula, Olive Legacy, Pewter Brush,Silicon Ev, Titanium EvSEATINGEDUCATIONALTABLESTABLESCOLORSMany <strong>ABCO</strong> products (excluding traditional tables series) can be manufactured in the following <strong>ABCO</strong> standard colors.Solids: Black, Dove Grey, Khaki, Slate GreyWoodgrains: Art Cabin Oak, Empire Mahogany, Fusion Maple, Golden Oak, Huntington Maple,Montana Walnut, Monticello Maple, Natural Pear, Versailles Anigre, Wild CherryPatterns: Bronze Legacy, Evening Tigris, Graphite Nebula, Grey Nebula, Olive Legacy, Pewter Brush,Silicon Ev, Titanium EvTops for these products can also be manufactured in any standard Wilsonart ® color for an upcharge that is stated in the option sectionfor each product group if available. Wilsonart ® -60 Matte finish is standard for the custom color option. Wilsonart ® -07 Textured Glass,-38 Fine Velvet Texture, and -90 Crystal finishes may also be selected for the custom color option on T-mold edged products (exceptfolding tables). Please note that there is a 15% upcharge for the custom color option and that the lead time for Wilsonart ® customcolor product is 6 to 8 weeks.PANELSDIMENSIONS & SPACEREQUIREMENTS INDEX800.336.0070 2011 <strong>ABCO</strong> Price Guide Dimensions & Space Requirements181
- Page 1 and 2:
A B C O P R I C E G U I D EJ U N E
- Page 3 and 4:
UNITY EXECUTIVEUnity Executive is w
- Page 5 and 6:
UNITY EXECUTIVE Rectangular DesksCO
- Page 7 and 8:
UNITY EXECUTIVE Rectangular Worksta
- Page 9 and 10:
UNITY EXECUTIVE ReturnsCONSTRUCTION
- Page 11 and 12:
UNITY EXECUTIVE Desk TransitionalsC
- Page 13 and 14:
UNITY EXECUTIVE TablesCONSTRUCTION/
- Page 15 and 16:
UNITY EXECUTIVE Accessories & Stora
- Page 17 and 18:
UNITY EXECUTIVE Accessories & Stora
- Page 19 and 20:
UNITY EXECUTIVE Accessories & Stora
- Page 21 and 22:
UNITY EXECUTIVE Accessories & Stora
- Page 23 and 24:
UNITY Unity Series is an economical
- Page 25 and 26:
CONFIGURATION OVERALL DIMENSION ZON
- Page 27 and 28:
UNITY Rectangular DesksMODEL NOMIN
- Page 29 and 30:
UNITY Rectangular WorkstationsCONST
- Page 31 and 32:
UNITY Rectangular WorkstationsMODEL
- Page 33 and 34:
UNITY ReturnsCONSTRUCTION/FEATURES
- Page 35 and 36:
UNITY Desk TransitionalsCONSTRUCTIO
- Page 37 and 38:
UNITY TransitionalsCONSTRUCTION/FEA
- Page 39 and 40:
UNITY PeninsulasCONSTRUCTION/FEATUR
- Page 41 and 42:
ENDURE ®Endure Series has remarkab
- Page 43 and 44:
ENDURE ® ConfigurationsCONFIGURATI
- Page 45 and 46:
ENDURE ® BridgesCONSTRUCTION/FEATU
- Page 47 and 48:
ENDURE ® Adaptable Flair Peninsula
- Page 49 and 50:
ENDURE ®PeninsulasCONSTRUCTION/FEA
- Page 51 and 52:
MODULAR FURNITURE Accessories & Sto
- Page 53 and 54:
MODULAR FURNITURE Accessories & Sto
- Page 55 and 56:
MODULAR FURNITURE Accessories & Sto
- Page 57 and 58:
MODULAR FURNITURE Accessories & Sto
- Page 59 and 60:
MODULAR FURNITURE Accessories & Sto
- Page 61 and 62:
MODULAR FURNITURE Accessories & Sto
- Page 63 and 64:
MODULAR FURNITURE Accessories & Sto
- Page 65 and 66:
MODULAR FURNITURE Accessories & Sto
- Page 67 and 68:
MODULAR FURNITURE Accessories & Sto
- Page 69 and 70:
MODULAR FURNITURE Accessories & Sto
- Page 71 and 72:
SMART TABLES ® Thermofused Melamin
- Page 73 and 74:
SMART TABLES ® Thermofused Melamin
- Page 75 and 76:
SMART TABLES ® Thermofused Melamin
- Page 77 and 78:
SMART TABLES ® Thermofused Melamin
- Page 79 and 80:
SMART TABLES ® Thermofused Melamin
- Page 81 and 82:
SMART TABLES ® Thermofused Melamin
- Page 83 and 84:
SMART TABLES ® High Pressure Lamin
- Page 85 and 86:
SMART TABLES ® High-Pressure Lamin
- Page 87 and 88:
SMART TABLES ® High-Pressure Lamin
- Page 89 and 90:
SMART TABLES ® High-Pressure Lamin
- Page 91 and 92:
SMART TABLES ® High-Pressure Lamin
- Page 93 and 94:
SMART TABLES ® High-Pressure Lamin
- Page 95 and 96:
SMART TABLES ® High-Pressure Lamin
- Page 97 and 98:
SMART TABLES ® High-Pressure Lamin
- Page 99 and 100:
SMART TABLES ®AccessoriesAccessori
- Page 101 and 102:
SMART TABLES ®AccessoriesCONSTRUCT
- Page 103 and 104:
CONFERENCE TABLESBuild the perfect
- Page 105 and 106:
WORKSTATIONS/DESKINGSINGLEGROOVE 3M
- Page 107 and 108:
LAMINATED XMETAL HMETAL POSTMETAL X
- Page 109 and 110:
TRAINING/CONFERENCE ROOM Accessorie
- Page 111 and 112:
TRAINING/CONFERENCE ROOM Accessorie
- Page 113 and 114:
MULTIPURPOSE TOPS AND BASES TopsCON
- Page 115 and 116:
MULTIPURPOSE TOPS AND BASES BasesCO
- Page 117 and 118:
UTILITY TABLESFunctional and versat
- Page 119 and 120:
FOLDING TABLES & TRUCKSWhen it come
- Page 121 and 122:
FOLDING TABLES & TRUCKS Low-Pressur
- Page 123 and 124:
Z SERIES High-Pressure LaminateCONS
- Page 125 and 126:
Z SERIES High-Pressure LaminateCONS
- Page 127 and 128:
Z SERIES High-Pressure LaminateCONS
- Page 129 and 130:
NEXT GENERATION®CONSTRUCTION/FEATU
- Page 131 and 132: NEXT GENERATION®MODEL NOMINAL DIM.
- Page 133 and 134: NEXT GENERATION®NOMINAL DIM. TOTAL
- Page 135 and 136: NEXT GENERATION®MODEL NOMINAL DIM.
- Page 137 and 138: NEW MEDLEY®CONSTRUCTION/FEATURES
- Page 139 and 140: NEW MEDLEY®CONSTRUCTION/FEATURES
- Page 141 and 142: NEW MEDLEY®CONSTRUCTION/FEATURES
- Page 143 and 144: NEW MEDLEY®CONSTRUCTION/FEATURES
- Page 145 and 146: NEW MEDLEY®Byrne Electrical’s 4-
- Page 147 and 148: NEW MEDLEY®CONSTRUCTION/FEATURES
- Page 149 and 150: EDUCATIONAL TABLES Accessories & St
- Page 151 and 152: EDUCATIONAL TABLES Accessories & St
- Page 153 and 154: SMART SEATING TrainerCONSTRUCTION/F
- Page 155 and 156: SMART SEATING Multi-Task OfficeCONS
- Page 157 and 158: SMART SEATINGSwivel MechanismTABLES
- Page 159 and 160: ABCO SNAP Panel FramesCONSTRUCTION/
- Page 161 and 162: ABCO SNAP Top InfillTOP INFILL EXAC
- Page 163 and 164: ABCO SNAP Bottom InfillBOTTOM EXACT
- Page 165 and 166: ABCO SNAP ConnectorsMODEL TOTAL CUB
- Page 167 and 168: ABCO SNAP Transaction CountersCONST
- Page 169 and 170: OP PANELSCONSTRUCTION/FEATURES• 1
- Page 171 and 172: OP PANELS Plexi-Glass PanelsCONSTRU
- Page 173 and 174: OP PANELS Storage & AccessoriesCONS
- Page 175 and 176: OP PANELS Storage & AccessoriesMODE
- Page 177 and 178: SPACE REQUIREMENTS Nominal Dimensio
- Page 179 and 180: PREFIX LISTING OF PRODUCTSAMH2.....
- Page 181: TERMS AND CONDITIONSEligibilityABCO
- Page 185 and 186: EDUCATIONALTABLESTABLESWORKSTATIONS