ZA216L Taxiway/Apron/Helipad Edge Utilising Light ... - IHR-Aviation

More documents

Recommendations

Info

IHR GmbH Hofmeister + Rumpfwww.ihr-aviation.netatg airports ltdAutomation House, Lowton Business Park, Newton Road, Lowton St. Mary’s, Warrington Wa3 2ap UKt +44 (0) 1942 68 5555 f +44 (0) 1942 68 5518 e products@atgairports.com w www.atgairports.com
IHR GmbH Hofmeister + Rumpfwww.ihr-aviation.netZA202 Taxiway Edge,Apron Edge, Helipadinset taxiway or low intensity runway light; inset helipad edge light; security or traffic control lightapplicationThe ZA202 is a low intensity omni-directional inset fitting.appropriate specificationsCAA CAP168 Table 6A/1NATO STANAG 3316BSI BS3224 Part 5installationThe unit is designed for mounting in a prepared concrete block andis secured by means of retaining bolts. Moulded socket secondaryleads can be supplied if required. The fitting is finished externally ingolden yellow gloss (Ref. no. 356 BS381C) and white internally. Thereflector/filter clamp are anodised.dimensionstypeTaxiway, helipad or runway edge light using J1 series lamps. Also240V mains version available. (B.C. or E.S.)Maximum projection above surfaceOverall diameterpacking specification41mm203mmSecurity light for vandal proof illumination of carparks, subways etc.or for under vehicle inspection at access/control points to securefacilities such as airports, barracks and other high risk sites.Traffic light for mini roundabout identification, bollard illumination,traffic lane separation etc.constructionThe body comprises an aluminium housing with a 203mm (8in)diameter flange, which is sealed at the top by a pressed heatresistingglass dome seated in a moulded gasket and secured inposition by a clamp ring. The substantial construction of the dome isdesigned to withstand a load of 1000lbs/sq.in.(Fitting packed in 1 carton with clear glass dome and lampholder butwithout extras.)Nett weight2.5kgGross weight3kgDimensions 215mm(w) x 215mm x 215mm (0.010m 3 )mains versionNett weight7.5kgGross weight8kgDimensions215mm x 215mm x 250mmsupplyThe lights are designed for use on a 6.6amp series circuit system.Each light requires an isolating transformer. Also available with GLSlamp for mains operation.
Page 2 and 3: IHR GmbH Hofmeister + Rumpfwww.ihr-
Page 15 and 16: IHR GmbH Hofmeister + Rumpfphotomet
Page 17: IHR GmbH Hofmeister + Rumpfwww.ihr-

ZA216L Taxiway/Apron/Helipad Edge Utilising Light ... - IHR-Aviation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?