High-Performance Micro-D Connectors and Cables - Servo and ...
High-Performance Micro-D Connectors and Cables - Servo and ...
High-Performance Micro-D Connectors and Cables - Servo and ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Micro</strong>-DBackshells<strong>Micro</strong>-D BackshellsGeneral Information <strong>and</strong> Reference DataBAND-IT ® shield termination systemFast, Cost-EffectiveShield TerminationAttach cable braid shields to EMI backshells withBAND-IT ® stainless steel straps. The BAND-IT ®system offers fast termination <strong>and</strong> the flexibility toh<strong>and</strong>le different diameters with the same b<strong>and</strong>.<strong>Micro</strong> B<strong>and</strong> ToolPart Number 600-061Weight: 1.18 lbs.Length: 6.75 Inches (172mm.)The aerospace industry has adopted this systemfor every type of application where reliability <strong>and</strong>durability are essential.IMPORTANT NOTE: ALWAYSDOUBLE-WRAP BANDS!Contact Glenair or visit our website(www.glenair.com) to view our complete line ofBAND-IT ® products, including pneumatic tools forhigh production <strong>and</strong> calibration kits.St<strong>and</strong>ard Length <strong>Micro</strong> B<strong>and</strong>8.125 Inches (206 mm.)Part Number 600-057600-057-1 Pre-CoiledUp to .88 Inches (22 mm.) DiameterExtended Length <strong>Micro</strong> B<strong>and</strong>14.25 Inches (362 mm.)Part Number 600-083600-083-1 Pre-CoiledUp to 1.88 Inches (47 mm) DiameterMStep OneCable PrepLay individual shields over the b<strong>and</strong>platform. Pull overall braid shield overthe b<strong>and</strong> platform so that all braidstr<strong>and</strong>s will be captured by the b<strong>and</strong>.Step TwoInstall B<strong>and</strong>Wrap the b<strong>and</strong> through the buckletwice. Insert the free end into theb<strong>and</strong>ing tool in the direction shownon the tool. Squeeze the short greyh<strong>and</strong>le to insert the b<strong>and</strong>. Slide theb<strong>and</strong> onto the cable. Close the blackh<strong>and</strong>le repeatedly until the h<strong>and</strong>leno longer opens. Close the long greyh<strong>and</strong>le until the tool cuts the b<strong>and</strong>.Remove the excess strap from the toolby closing the small grey h<strong>and</strong>le.Step ThreeTrim BraidIt's a snap! Just trim the excess braid<strong>and</strong> you're done.© 2011 Glenair, Inc. U.S. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comM-4E-Mail: sales@glenair.com
Change language