CanStaCk Linear aCtuatorS

35DBM-K17.42±0.3018.5419.05±0.25.686±.012.730.750±.01042.01±0.101.654±.004Ø3.20±0.13Ø.126±.005#2-56 UNC-2A(OTHER UNIFIEDAND METRIC THREADSAVAILABLE)7.62±0.25.300±.010BOTH ENDSMAXØ14.99±0.13Ø.590±.005(2x)BOTH ENDSØ7.85±0.13Ø.309±.005BOTH ENDSØ35.94Ø1.41530°MAXØ3.51 REFR3.96±0.13Ø.138 REF304.8±25.4R.156±.0053.81±0.1312±1(2x).150±.00536.75±0.711.447±.028EXTENDED18.85±0.71NOTES :1. NOT RECOMMENDED TO USE AT THE FULLY RETRACTEDAND EXTENDED POSITIONS.2. SHAFT AXIAL BACKLASH : 0.15/.006 MAX..742±.028RETRACTED35DBM-KMotor Part Number35DBMXXB1B-K35DBMXXB2B-KRated voltagevdcResistance per phase, ± 10%ohmsInductance per phase, typmHRated current per phase *ampsMaximum force .001" (0.0254mm) oz / N.002" ( 0.0508mm).003" (0.0762mm)Minimum force (unenergized) .001" (0.0254mm) oz / N.002" ( 0.0508mm).003" (0.0762mm)Maximum travel .001" (0.0254mm) in / mm.002" ( 0.0508mm).003" (0.0762mm)Step angle, ± 0.5º *degreesSteps per revolution *Thermal resistanceºC/wattAmbient temperature rangeOperating ºCStorage ºCBearing typeInsulation resisitance at 500vdcMohmsDielectric withstanding voltagevacWeightlbs / gLeadwiresTemperature class, maxRoHS5.00 12.0010.00 58.0011.20 60.000.50 0.21103.9 / 28.984.9 / 23.647.8 / 13.340 / 11.110 / 2.85 / 1.40.705 / 17.90.705 / 17.90.705 / 17.97.548N.A.-20 ~ +70-40 ~ +85Ball bearing20 megohms650 for 2 seconds0.1875 / 85.2AWG 26, UL 1429B (130°C)COMPLIANTALL MOTOR DATA VALUES AT 20ºC UNLESS OTHERWISE SPECIFIED* ENERGISE AT RATED CURRENT, 2 PHASE ON, L/R Drive178www.portescap.com