Power and Performance - Tsubaki Europe

TSUBAKI Underground MiningFace &Roof DrillingFace and Roof DrillingFace and roof drillers are the first machines into newly opened areas to sure up the roofand walls and make it safe, and having TSUBAKI as a partner to get this job done is all thatmuch easier. Whether you are drilling for the next blast or setting in roof bolts our productswork in the under ground with you.For this application TSUBAKI chains are specified by major OEMs and replacement partsspecialists for performance and reliability, which makes your choice even easier.With special Heavy Duty Drive Chains (Pg.20) and surface coating (Pg.17, 22) to preventcorrosion and failure the TSUBAKI chain line up is second to none.ContinuousMiner &BridgeConveyor( Jiffy Conveyor )Continuous MinerContinuous miners are large machines that work directly in the coal face, scraping material fromthe wall/ceiling with their giant teeth set on rotating steel drums. Being able to mine well over 30tonnes of coal per minute, these machines are the heart of modern underground mining.Working at the coal face is exactly what we are doing and TSUBAKI is currently developing achain that will incorporate over 90 years of knowledge and success to bring to the market ahigh performance chain that will extract greater profits for your operation.Bridge ConveyorThese units are the transfer systems of the continuous miners and operate at high speeds anddischarge rates, so the chains used on these machines must be equal to the operationsdemands. That's why mine sites around the world specify TSUBAKI as their partner, as ourname is synonymous with performance under pressure.Available types of Bridge Chain.– Standard Bridge Chain– Heavy Duty Bridge Chain– Extended Pin Bridge ChainPlease contact your local TSUBAKI representative for more details.FACE & ROOF DRILLING / CONTINUOUS MINER & BRIDGE CONVEYOR3738