Socket Tooling - McElroy Manufacturing, Inc.

Heater Adapter SetUsed to heat pipe and fitting.All adapters have ananti-stick coating. Imperialsize heater adapters aremanufactured in compliancewith ASTM F1056.Metric heater adapters listed below are forISO 8085-1 socket fusion fittings and ISO4437 pipes.Part No.Pipe SizeSW02676 x 4’’ IPS 4.50” ODSW02672 x 3’’ IPS 3.50” ODSW02669 v 2’’ IPS 2.37” ODSW02668 v 1½’’ IPS 1.90” ODSW02667 v 1¼’’ IPS 1.66” ODSW02666 v 1¼’’ CTS 1.38” ODSW02665 1’’ IPS 1.32” ODSW02662 1’’ CTS 1.13” ODSW02664 ¾’’ IPS 1.05” ODSW02661 ¾’’ CTS 0.88” ODSW02663 ½’’ IPS 0.84” ODSW02660 ½’’ CTS 0.63” ODSW14160 x 125mm 4.92” ODSW14159 x 110mm 4.33” ODSW14158 x 90mm 3.54” ODSW14157 x 75mm 2.95” ODSW14156 63mm 2.48” ODSW14155 50mm 1.97” ODSW14154 40mm 1.57” ODSW14153 32mm 1.26” ODSW14152 25mm 0.98” ODv Requires the 2’’ Multi-Mc ® Heaterx Requires the 4’’ Multi-Mc ® HeaterChamfer Tool/Depth GaugePart No.Used to put the requiredchamfer on the end ofthe pipe and is used asa depth gauge.Pipe SizeSW08736 4’’ IPS 4.50” ODSW08734 3’’ IPS 3.50” ODSW08701 2’’ IPS 2.37” ODSW08703 1½’’ IPS 1.90” ODSW08705 1¼’’ IPS 1.66” ODSW08713 1¼’’ CTS 1.38” ODSW08707 1’’ IPS 1.32” ODSW08715 1’’ CTS 1.13” ODSW08709 ¾’’ IPS 1.05” ODSW08717 ¾’’ CTS 0.88” ODSW08711 ½’’ IPS 0.84” ODSW08719 ½’’ CTS 0.63” ODSW14321 125mm 4.92” ODSW14319 110mm 4.33” ODSW14317 90mm 3.54” ODSW14315 75mm 2.95” ODSW14313 63mm 2.48” ODSW14311 50mm 1.97” ODSW14309 40mm 1.57” ODSW14307 32mm 1.26” ODSW14305 25mm 0.98” ODSW14303 20mm 0.78” ODSW14301 16mm 0.63” ODSW14151 20mm 0.78” ODSW14150 16mm 0.63” OD HeaterSizeModelNo.Specifications & AccessoriesPart No.Cold Ring ToolUsed with the depth gaugeto clamp at the properdepth and to round andhold the pipe to be fused.Pipe SizeSW02724 4’’ IPS 4.50” ODSW02723 3’’ IPS 3.50” ODSW02710 2’’ IPS 2.37” ODSW02722 1½’’ IPS 1.90” ODSW02721 1¼’’ IPS 1.66” ODSW02717 1¼’’ CTS 1.38” ODSW02720 1’’ IPS 1.32” ODSW02716 1’’ CTS 1.13” ODSW02719 ¾’’ IPS 1.05” ODSW02715 ¾’’ CTS 0.88” ODSW02718 ½’’ IPS 0.84” ODSW02714 ½’’ CTS 0.63” ODSW14211 125mm 4.92” ODSW14210 110mm 4.33” ODSW14209 90mm 3.54” ODSW14208 75mm 2.95” ODSW14207 63mm 2.48” ODSW14206 50mm 1.97” ODSW14205 40mm 1.57” ODSW14204 32mm 1.26” ODSW14203 25mm 0.98” ODSW14202 20mm 0.78” ODSW14201 16mm 0.63” ODInput Voltage RequirementsPlug Type(See pg140)Multi-Mc ® Heaters - Microprocessor control and dial thermometer to monitor temperature.Heater adapters sold separately2” 214905 100V-120V, 50/60Hz, 800 Watt, 1Ph A2” 214906 200V-240V, 50/60Hz, 800 Watt, 1Ph C4” 424315 100V-120V, 50/60Hz,1200 Watt, 1Ph A4” 424316 200V-240V, 50/60Hz,1200 Watt, 1Ph CPart No.Insulated Heater SlingSW08601SocketDescriptionInsulated heater sling protectsheater and helps maintain aconstant temperature.Socket Fitting Holder - Required for 2” and larger fittingsSW07101SW10601SW112012’’ Holder3’’ Holder4’’ HolderAuxiliary Handle Kit - Includes attaching screwsSW02804SW02806Suggested for 1¼’’ fittings and larger.For 2” Multi-Mc ® heater.For 4” Multi-Mc ® heater.Spare Screw/Driver Kit - For use with Multi-Mc ® heatersA214102A424901Spare Chamfer BladeSW08731Socket Tooling Storage BoxPyrometer KitASW15901A218804For 2” Multi-Mc ® heater.For 4” Multi-Mc ® heater.Spare blade for the depth gauge/chamfer tool.Storage box for socket tooling andaccessories. Includes universalstorage tray to organize tooling.Accurately checks surfacetemperatures of heater.Fusion Machines17