Clutch Puller

More documents

Recommendations

Info

Floating Piston Removal Tool Kit p/n: 0644-402 (Complete Kit) p/n: 0644-416 (Removal Tool) p/n: 0644-417 (Location Gauge) p/n: 0644-418 (Gauge Set Screw) p/n: 0644-419 (Gauge Stop Collar) Usage: Remove floating piston from rebuildable gas shock absorbers. Fig. 89 0644-402 Bearing Cap Seal Protector p/n: 0644-268 Usage: Protect cap seal on rebuildable shock absorbers through 2002 models. Fig. 90 AE142 Bearing Cap Seal Protector p/n: 0644-403 (1/2 in.) p/n: 0644-404 (5/8 in.) Usage: Protect cap seal on rebuildable shock absorbers on 2003 and newer models. Fig. 91 Ball Joint Fork p/n: 0644-098 Usage: Separate ball joint from spindle or drag link. Fig. 92 AE142 AE091 Track Clip Installation Tool p/n: 0644-194 Usage: Install track clips on Camoplast and Yokohama rubber tracks. Fig. 93 0644-194 19
Track Stud Hole Drill (7 mm) p/n: 1639-629 Usage: Drill 7 mm hole through rubber tracks for installing studs. Fig. 94 20 AE137 Track Stud Hole Drill (1/4 in.) p/n: 1639-628 Usage: Drill 1/4 in. hole through rubber track for installing studs. Fig. 95 Carbide & Stud Specifications Gauge p/n: 1639-632 Usage: Check stud length and carbide angle. Fig. 96 AE137 AE088 Idler Wheel Puller Kit p/n: 0644-122 (Complete Kit - 6 in.) p/n: 0644-400 (Complete Kit - 8 in.) p/n: 0644-114 (A. Handle - 6 in.) p/n: 0644-401 (A. Handle - 8 in.) p/n: 0644-111 (B. Insertion Tool) p/n: 0644-120 (C. Pivot Plate) p/n: 0644-118 (D. Adapter Plate) p/n: 0623-310 (E. Cap Screw) p/n: 0644-119 (F. Puller Bolt) - 6 in. Kit p/n: 0644-432 (F. Puller Bolt) - 8 in. Kit Usage: Remove/install skid frame idler wheels. Fig. 97 Idler Wheel Alignment Tool p/n: 0644-228 Usage: Align center idler wheels during replacement without removing the suspension. Fig. 98 AE097B BE025
Page 1 and 2: ® ARCTICCAT Effective Date: May, 2
Page 3 and 4: 2 TABLE OF CONTENTS Accessory Adapt
Page 5 and 6: Flywheel Spanner Wrench p/n: 0144-0
Page 7 and 8: Rigid Hone Stone Set (2.7-4.1 in.)
Page 9 and 10: Oil Injection Usage Tool p/n: 0644-
Page 11 and 12: EFI Throttle Cable Jam Nut/Oil- Inj
Page 13 and 14: Throttle Position Sensor (TPS) Adju
Page 15 and 16: Replacement Rivnuts p/n: 0623-557 (
Page 17 and 18: Shock Spanner Wrench p/n: 2604-878
Page 19: Inflation Needle p/n: 0744-020 Usag
Page 23 and 24: Clutch Puller (Comet) p/n: 0644-096
Page 25 and 26: Reverse Gear Adjustment Gauge p/n:
Page 27: Printed in U.S.A. ®Trademarks of A

Clutch Puller

Create successful ePaper yourself

Delete template?

Save as template?