Industrial P.O.E. Managed Ethernet Switch - Meridian Technologies

5.1.5 DHCP Server5.1.5.1 DHCP Server – SettingMS10FT8GX2POE User’s ManualEnable this DHCP server function will cause the switch system to function as a DHCP server.DHCP Server Configuration interfaceThe following table describes the labels in this screen.LabelDescriptionDHCP ServerEnable or Disable the DHCP Server function. Enable – theswitch will be the DHCP server on your local networkStart IP Address The dynamic IP assign range. Low IP address is the beginningof the dynamic IP assigns range. For example: dynamic IPassign range is from 192.168.1.100 to 192.168.1.200.192.168.1.100 will be the Start IP address.End IP Address The dynamic IP assign range. High IP address is the end of thedynamic IP assigns range. For example: dynamic IP assignrange is from 192.168.1.100 to 192.168.1.200. 192.168.1.200will be the End IP addressSubnet MaskThe dynamic IP assign range subnet maskGatewayThe gateway in your network.DNSDomain Name Server IP Address in your network.It is the period that system will reset the assigned dynamic IP toLease Time (Hour)ensure the IP address is in used.ApplyClick “Apply” to activate the configurations.Meridian Technologies, Inc., 700 Elmont Rd., Elmont, NY 11003Phone: +1 516-285-1000 · Fax: +1 516-285-6300Web: www.meridian-tech.com | E-mail: support@meridian-tech.comVersion 1.327