Rear and front 2- and 4-drum mowers - SaMASZ

FOR PROFESSIONALSRear and front 2- and 4-drummowers

REAR 2-DRUMMOWERSD LGSIGNUMTEST10/03 bestandenZ 010Z 010/1Z 010/2Economy andprecision ofmowing...Drum mowers 1,65 m to2,10 m have solid designand are very durable.Low power demandmakes them one of thebest in Polish market aswell as abroad.View withoutsafety guardsThanks to hydrauliclifting (optional equipment),mower can beeasily transported atthe rear or side of thetractor.Z 010Z 010/221Design of drum mower:1. Improved sliding saucer hub – type IV – twodouble – row bearings (only Z 010/2 2,10 m),2. Regulated cutting height by means of distancering.Advantages:1. Genious invention of 20th century - cuts perfectlyeither lying grass or very high sedge - cane,2. Factory set 5,8 cm cutting height, regulated bydistance rings,3. DLG Signum Test,4. Solid and tough design,Z 010/15. Ideally fitted to the ground and even workingheight,6. Safety breakaway spring regulated by deflection,7. Quick and easy knife replacement,8. PTO shaft in standard equipment,9. Silent and stable operation.1TypeMowingwidth[m]2Workingcapacity[ha/h]Number ofknives[pcs.]Tractor’spower[HP]RPMPTOshaftDimensionsw / l / h[cm]Z 010 1,65 ~ 1,50from 40331 / 152 / 116 4006400 Nm540Z 010/1 1,85 ~ 2,00 from 60 372 / 162 / 102 450Z 010/2 2,10 ~ 2,50 8 from 70 540 Nm 410 / 175 / 106 5503Quick and easy knifereplacement by meansof mounting lever instandard equipment.Weight[kg]23

REAR 2-DRUMMOWERSWITH TINE CONDITIONERZ 010/42,10 mREAR 2-DRUMMOWERS68,0 cmZ 064/3 [mini]Z 064Mowers with tine conditioners have hydraulic lifting in standard equipment, which enables transportupwards at the back or side of the tractor. Factory set working height (6 cm) hasinfluence on grass re-growth and does not harm root unit of the grass.2-drum mowers Z064/3[mini] are attachedto municipal tractors.Shorter linkage (68 cm)and lower weight (only250 kg) - these parametersenable attachmentto smaller tractors - upto 1000 kgZ 064/3 [mini]FOR MUNICIPAL TRACTORSView withoutsafety guards36,0 cm106,0 cmZ 010/4TINE CONDITIONERD LGSIGNUMTEST10/03 bestandenZ 064Advantages of tine conditioner:FOR AGRICULTURAL TRACTORS1. Accelerates drying,2. Eliminates tedding,3. Lower losses of forage ingredients owing toreduced handling,4. Loose forage spread into wide swath,5. Always even swath for baler collecting,6. New modernized tines in V-shape made ofhard-to-tear steel Hardox, placed in rubber inserts.~ 1,10 mAdvantages:1. Low weight and power demand,2. Factory set cutting height at 5 cm, which can beadjusted by distance rings (8 mm),3. Ideally fitted to the ground and even workingheight,4. Stone tested safety guards (EN 745),5. Z 064 - DLG Signum Test,6. PTO shaft in standard equipment,7. Despite small dimensions they perfectly muddlesthrough bigger vesture,8. Safety breakaway spring regulated by deflection,9. Quick and easy knife replacement,10. Hydraulic lifting set in optional equipment.TypeMowingwidth[m]Swathwidth[m]Workingcapacity[ha/h]Numberof knives[pcs.]Tractor’spower[HP]RPMPTOshaftConditioner’sshaftZ 010/4 2,10 ca. 1,10 ~ 2,50 8 from 75 540 540 Nm 250 Nm 690Weight[kg]TypeMowingwidth[m]Workingcapacity[ha/h]Numberof knives[pcs.]Tractor’spower[HP]RPMPTOshaftTractor’sclassDrum’sheight[cm]Dimension’sw / l / h[cm]Z 064/31,35 ~ 0,70 4 from 200,4 36,0 228 / 96 / 88 250[mini]540 250 NmZ 064 1,35 ~ 1,00 4 from 25 0,6 44,0 290 / 137 / 97 330Weight[kg]45

FRONT 2 AND 4-DRUMMOWERSK4BF 265K4BF 300REAR 4-DRUM MOWERSWITH CENTRAL SUSPENSIONK4BTC 265K2BF 210K4BTC 300Front drum mowers arecharacterized by perfectground following,thanks to suspensionwith support springsWe proudly present series of 4-drum mowersK4BTC with central suspension enabling perfectground following and high range of inclination,which facilitates operation on uneventerrain.Mowers with 2 or 4drums have sliding saucerhub – type IV – twodouble – row bearingsK4BF 300K4BTC 265Advantages:1. High capacity – even in tough conditions,2 Lifted side safety guard,3. Factory set working height at 5,8 cm regulated bydistance rings (8 mm),4. Ideally fitted to the ground and even workingheight,5. Perfect in combination with disc and drum mowers,TypeMowingwidth[m]Workingcapacity[ha/h]Numberof knives[pcs.]Tractor’spower[HP]RPMK2BF 210 2,10 ~ 2,50 8 from 70 1000/5406. Tractor’s triangle cat. II in standard equipment,7. Stone tested safety guards (EN 745),8. PTO shaft in standard equipment,9. Quick and easy knife replacement,10. Solid and tough design,11. Silent and stable operation.Conditioner’sshaftSwathwidth[m]K2BF 210Dimensionsb / l / h[cm]K4BF 265 2,65 ~ 3,00 12 from 90540 Nm326 / 138 / 122 8001000 ca. 1,20-1,60K4BF 300 3,00 ~ 3,50 18 from 100 369 / 144 / 122 870Weight[kg]ca. 0,80 268 / 121 / 166 520Hydro-pneumatic suspensionInstead of support springs (upper picture) hydro-pneumaticsuspension is needed especially for the first cut, for lucerne,clover etc. to prevent damage to the stubble. Hydro-pneumaticsuspension enables operation with minimum pressure onthe ground from around 70 kg.A B CTransport positionsThe most importantadvantage of K4BTC mowersis a possibility totransport the machinesin three different positions,which facilitatescomfort of transport onnarrow roads.Working positions: A) upwards at the back of the tractor, B) upwards at the side of the tractor,C) horizontally at the back of the tractor.Latch mechanismInnovative, patented latch mechanismenables setting the mower inthree positions depending on workingmode: work – storing – transport.Proper position can be adjusted bymeans of a cord from tractor’s cabin.6* When buying SaMASZ front mowers please specify direction of PTO shaft (looking from driver’s seat), diameter and number of splines.7

Perfectmowing...Hydraulic safety breakaway deviceCentral suspension unit is integrated with hydraulicsafety device, which protects the mower againsthitting into immovable obstacle. In the eventof hitting an immovable obstacle the cutterbarfolds back and at the same time rises about 40cm. After that, the cutterbar automatically comesback to working positionAdvantages:1. Central suspension (spring in standard equipment-hydropneumatic option),2. Hydraulic lifting to transport position in standardequipment,3. High capacity, even in tough conditions,4. Stone tested safety guards (EN 745),5. Hydraulic safety breakaway device,6. Lifted side safety guard,7. Swath width regulated by swath guides,8. Quick and easy knife replacement,9. PTO shaft in standard equipment,10. Ideally fitted to the ground and even workingheight,11. Central suspension – even weight balance onthe ground,12. Silent and stable operation.TypeMowingwidth[m]Swathwidth[m]Workingcapacity[ha/h]Numberof knives[pcs.]Tractor”spower[HP]RPMPTOshaftMin.transportheightWeigh[kg]K4BTC 26510002,65~ 3,00 12 from 803,45 mK4BTC 265H 9501,20 - 1,601000 540 NmK4BTC 30010703,00 ~ 3,50 18 from 90 3,80 mK4BTC 300H 1015H - Hydro-pneumatic suspension instead of springs in optional equipmentSaMASZ Sp. z o. o.tel. +48 85 664 70 31fax. +48 85 664 70 41email: samasz@samasz.pl15-161 Białystokul. Trawiasta 15Polandwww.samasz.comYour dealer:Edition 1 / 2012 EN