Datasheet PDF - Xortec.de

Data SheetSpecificationsE1/T1 INTERFACENumber of Channels16Data RateE1: 2048 kbpsT1: 1544 kbpsImpedance120Ω, E1 balanced100Ω, T1 balanced75Ω, E1 unbalancedConnectorsOptimux-34E1 Balanced: RJ-45E1 Unbalanced: BNC or IEC-169/13 (in 2Uunit)Note: For balanced and unbalanced channels in thesame unit, order a 1U-high unit and oneCBL-RJ45/BNC/E1/X adaptor cable for each pair ofBNC connectors.Optimux-25T1 Balanced: RJ-45OP-34C, OP-25CTwo DB-44 connectors on the frontmodule panel convertible to 16 balancedinterfaces via adaptor cables. WithOP-34C, unbalanced interfaces are alsoavailable (see Ordering)LINK INTERFACES(MAIN AND BACKUP)Data RateOptimux-34, OP-34C: E3 (34.368 Mbps)Optimux-25, OP-25C: RAD proprietary(25.910 Mbps)Interface OptionsSee Table 2ConnectorsSFP interfaces with LC connectors orSC/APC for single wavelength single fiberStandardsOP-34: ITU G.703, G.742, G.751, G.823,G.955, IEEE 802.3OP-25: ITU G.703, G.824, G.955, IEEE802.3HIGH-SPEED INTERFACE (STANDALONEONLY)TypeV.35ConnectorDB-25 (ISO-2110 or Telebras pinout)ETHERNET INTERFACESType10/100BaseTConnectorsStandalone: RJ-45Card: lower DB-44 connector, via adaptorcablesCONTROL PORT (STANDALONE UNITSONLY)TypeRS-232 DCE asynchronousData Rate9.6, 19.2, 38.4, 57.6, 115.2 kbpsConnector9-pin D-type femaleALARM PORT (STANDALONE UNITSONLY)TypeDry relay contacts for major and minoralarmsConnector9-pin D-type femaleSTANDALONE INDICATORSPowerOFF – Not poweredON (green) – Normal operationON (red) – Power malfunctionSystemTST (yellow) – Self-test or loopFLT (red) – System faultTable 2. Link Interface OptionsModule NameTransmitter Type andWavelengthConnectorTypeFiber TypeTypical OutputPowerReceiverSensitivityTypical Range(Ordering Option) [nm] [dBm] [dBm] [km] [miles]SFP-12(Optimux-34,OP-34C only)– SMB Coax cable – – (Per ITU-T G.703standard)SFP-1 LED, 1310 LC 62.5/125 Multimode -18 -31 6.5 4.0SFP-2 Laser, 1310 LC 9/125 Single mode -12 -31 38 23.6SFP-3 Long haul laser, 1310 LC 9/125 Single mode -2 -34 70 43.4SFP-4 Long haul laser, 1550 LC 9/125 Single mode -2 -34 110 68.3SFP-10aLaser WDM,Transmit: 1310,Receive: 1550LC9/125 Single mode(single fiber)-12 -30 40 24.8SFP-10bLaser WDM,Transmit: 1550,Receive: 1310LC9/125 Single mode(single fiber)-12 -30 40 24.8Note: Typical ranges are calculated according to attenuation of 0.4 dB/km for 1310 nm, 0.25 dB/km for 1550 nm for single mode fiber.