Folder - Bego USA

Korostar plusConvincing technologyIts shape, technology and high performancemake Korostar plus a first-classblaster. The rugged, tried and tested unitfor manual blasting of investment materialis equally well suited for crowns and bridgesas well as for partial denture work.Korox ® 250 or Korox ® 110 is used asblasting material. The blasting chamberis fully illuminated and the large windowprovides a clear view of the work area.Trouble-free and fatigue-freeoperationThe integrated filter module ensures aclear view of the work area: the blastingmaterial and dust are reliably separatedhere. An extremely effective recirculationprocess keeps blasting material consumptionto a minimum.Subject to modifications in design, scope of delivery and composition. Whether given verbally, in writing orthrough practical instructions, our process-related data and recommendations are based upon our ownexperience and trials and can only be regarded as standard values. Status as at: 02.07.03.Technical data:Korostar plus and Korostar ZHeightWidthDepthRated voltageSpecial voltagePower at rated voltage 230 VLighting540 mm365 mm425 mmwith filter module (plus) 550 mm230 V, 50/60 Hzonly Z: 100 + 120 V, 50/60 Hz810 W (plus), 60 W (Z)230 V/9 WCompressed air supply 4 – 6 bar (0.4 – 0.6 [MPa]), 1/4“Air consumptionapprox. 120 l/minCapacity8 kgWeight (excl. blasting material)28 kg (plus), 18 kg (Z)Korostar plus – The manual blasting unit for crowns, bridges andpartial denture work New, ergonomically oriented design Relaxed working position, great hand freedom thanks to slanting design of thehousing sides and large openings Extremely rugged metal housing for continuous operation, small floor space required Reliable even under maximum load The injection nozzle integrated into the blasting material conveying system maintainsan optimal proportion of blasting material in the compressed air flow of therecirculation system Large charging flap and well illuminated blasting chamber High extraction rate through integrated filter module with quadruple filter system High collection capacity of the prefilter: 1.5 – 5 kg depending on type of dustThe operating apertures are sealed withsleeves made of resistant rubber. Everytechnician who operates this unit cantherefore work with his/her own gloves.Korostar plus is exactly the right unit forextremely hard laboratory applications. Itcan be used for many fields of work andis convincing on the basis of its qualityand long service life.The integrated filter moduleThe filter module, equipped with a quadruplefilter system, is a high-performanceunit for suction extraction of thedust generated during blasting work. Toadditionally retain the hazardous fine dustthat can penetrate into the lungs, filtermaterial is used for which a test certificatehas been issued by the Institute forOccupational Safety (BIA) of the Germanemployers’ liability insurance association.Changing the filter is very easy. The economicalpaper prefilter bag is removedand replaced with a new one. Dependingon the type of dust, the capacity is1.5 – 5 kg. The filter module begins operatingas soon as the blaster is switchedon. The high extraction capacity is achievedat a low noise level. The acousticsignal that sounds when the filter is nearlyfull is also very helpful. If one does notreact to it and continues to work until it isfull, the module switches off. Then theblasting unit cannot be put into operationagain until the filter has been replaced.Korostar ZBlasting unit like Korostar plus, but withoutintegrated suction extraction, designedfor connection to a central suction extractionsystem.Availability and accessories: Unit Pieces Order No.Scope of delivery:Korostar plus 26123incl. filter module,additionally with 1 window, 1 window gasket,1 rubber plug, 5 paper filters and 4 fusesKorostar Z 26120must be connected to external suction extraction system,additionally with 1 window, 1 window gasket,1 rubber plug and 2 fusesAccessories:Paper filters (plus) 1 pack 10 11275Fine dust filter (plus) 1 pack 11276(3 fine dust filters, 1 motor protection filter,1 exhaust air filter)Spare nozzle 1 12136Spare windows 1 pack 6 15094Korox ® 250 special corundum blasting material 8 kg/20 kg 46014/54300Korox ® 110 special corundum blasting material 8 kg/20 kg 46044/54299BEGO Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG · Technologiepark Universität · Wilhelm-Herbst-Straße 1 · D-28359 BremenTelefon +49 421 20 28-0 · Telefax +49 421 20 28-100 · Internet: http://www.bego.com · E-mail: info@bego.comBEGO Canada · 700, boul. du Parc Technologique · Québec GIP 4S3 · Telephone +1418 683-6567 · Fax +1418 683-7354BEGO USA Inc. · 24 Albion Road (Suite 103), Lincoln RI 02865 · Telephone +1401334-9261 · Fax +1401 334-9265 · E-mail: info@begousa.comBEGO France · 2 rue du Nouveau Bercy, 94220 Charenton le pont · Telephone +33 14179 1290 · Fax +33 14518 0235 · E-mail: france@bego.comBest.-Nr. 81710 · 2m RT 255667/Al · „ 2005 by BEGO · Printed on “Zanders Mega” stationary with a 50 % recycling paper share · Oct. ’05Blasting unitsThe new BEGO blasting units –solid technology, new design New, ergonomically oriented design Relaxed working position, great hand freedom thanks toslanting design of the housing sides and large openings Extremely rugged metal housing for continuousoperation, small floor space required Good view of the objects to be blasted Good illumination of the blasting chamber throughdust-protected tubular lamps with long service life Can be supplied with integrated filter module or forconnection to central suction extraction systemProtempomatic plus –Fully automatic blasting unitwith integrated high-performancefilter moduleKorostar plus –Manual blasting unit withintegrated high-performancefilter moduleBEGO is an official co-partner ofthe German Olympic teams forTorino 2006 and Beijing 2008Duostar plus –Combined blastingunit with two fine-jetpencils and integratedhigh-performancefilter module

Protempomatic plusDuostar plusThe high-performance blastingunit for investment materialsProtempomatic plus is a rugged blastingunit especially suited for hard everydayworking conditions. It makes it possibleto blast investment material of castingsquickly and efficiently. 6 partial denturescan be blasted automatically in 15 – 20minutes or also individual castings bymeans of manual control. The timeswitch, which has a selection range from1 – 60 minutes, switches off the unit afterthe selected time has elapsed. The chargingflap offers additional security througha magnetic switch that immediately interruptsthe blasting operation when the flapis opened.Technical data:Protempomatic plus and Protempomatic ZHeight540 mmWidth365 mmDepth425 mmwith filter module (plus) 550 mmRated voltage230 V, 50/60 HzSpecial voltageonly Z: 100 + 120 V, 50/60 HzPower at rated voltage 230 V810 W (plus), 60 W (Z)Lighting230 V/9 WCompressed air supply 4 – 6 bar (0.4 – 0.6 [MPa]), 1/4“Air consumptionapprox.120 l/minCapacity8 kgWeight (excl. blasting material)30 kg (plus), 20 kg (Z)Protempomatic plus – Fully automatic blasting unit for continuousoperation in the laboratory New, ergonomically oriented design Relaxed working position, great hand freedom thanks to slanting design of thehousing sides and large openings Extremely rugged metal housing for continuous operation, small floor space required Unobstructed view of object to be blasted through air separation of the blastingmaterial, always optimal proportion of blasting material in the air flow Up to 6 partial dentures can be automatically blasted at the same time in 15 – 20 min. Freely selectable blasting time from 1 – 60 min. Charging flap with electrical protection through magnetic switch: when opened, theblasting operation is interrupted Integrated high-performance filter module with quadruple filter systemWith high-performance filtermodule for optimal dust protectionThe filter module, equipped with a quadruplefilter system, is a high-performanceunit for suction extraction of the dustgenerated during blasting work. To additionallyretain the hazardous fine dust thatcan penetrate into the lungs, filter materialis used for which a test certificate hasbeen issued by the Institute for OccupationalSafety (BIA) of the German employers’liability insurance association.Changing the filter is very easy. The economicalpaper prefilter bag is removedand replaced with a new one. Dependingon the type of dust, the capacity is1.5 – 5 kg. The filter module begins operatingas soon as the blaster is switchedon. The high extraction capacity is achievedat a low noise level. The acousticsignal that sounds when the filter is nearlyfull is also very helpful. If one does notreact to it and continues to work until it isfull, the module switches off. Then theblasting unit cannot be put into operationagain until the filter has been replaced.Protempomatic ZBlasting unit like Protempomatic plus,but without integrated suction extraction,designed for connection to a centralsuction extraction system.Availability and accessories: Unit Pieces Order No.Scope of delivery:Protempomatic plus 26113incl. filter module,additionally with 1 window, 1 window gasket,1 rubber plug, 1 glove, 5 paper filtersand 4 fusesProtempomatic Z 26110for connection to external suction extraction system,additionally with 1 window, 1 window gasket,1 rubber plug, 1 glove and2 fusesAccessories:Paper filter (plus) 1 pack 10 11275Fine dust filter (plus)1 pack(3 fine dust filters, 1 motor protection filter,1 exhaust air filter) 11276Spare gloves 1 pack 2 pairs 14554Hansa nozzle 1 12189Turntable, compl. 1 12276Spare windows 1 pack 6 15094Korox ® 250 special corundum blasting material 8 kg/20 kg 46014/54300Korox ® 110 special corundum blasting material 8 kg/20 kg 46044/54299One unit that does two jobsDuostar plus is economical and particularlywell suited for small and mediumsizedlaboratories. It enables you to carryout practically all major blasting work:firstly, it can be used to blast the investmentmaterial manually with Korox ® 250or Korox ® 110, as with a normal recirculationblasting unit. Secondly, with the twofine-jet pencils it is possible to performblasting work for the crown and bridgetechnique just as precisely as with aspecial fine blasting unit. In this case theblasting material is, of course, used onlyonce whereas it is used several times inDuostar plus – Two blasters in one New, ergonomically oriented design Relaxed working position, great hand freedom thanks to slanting design of thehousing sides and large openings Optimal utilisation through application as recirculation and fine blasting unit Low space requirements for a unit with two integrated blasting techniques, veryrugged metal housing, easy foot switch operation Two fine-jet pencils for precise blasting work, blasting material is only used once Can be switched over from recirculation to single use of the blasting material Fine-jet pencils can be used for different blasting material grain sizes thanks toreplaceable nozzles Optimal dust protection through integrated filter module with quadruple filter system Ideal as blasting station for small and medium-sized laboratoriesthe economical recirculation process forblasting the investment material.Easy and ergonomic operationThe high-performance filter moduleensures a clear view of the object to beblasted. Blasting material and dust arereliably separated here. An economicalrecirculation process and the optimalmetering system keep blasting materialconsumption to a minimum. The footswitch for controlled blasting enablesoptimal control of the object and thefine-jet pencil.Availability and accessories: Unit Pieces Order No.Scope of delivery:Duostar plus 26118incl. initial filling of fine blasting material containerKorox ® 110/ Perlablast ® micro, 2 fine-jet pencil nozzles 1.2 mm / 0.8 mm, additionally with 1 window,1 window gasket, 1 rubber plug, 5 paper filters,1 plastic funnel, 1m hose and 4 fusesDuostar Z 26115must be connected to external suction extraction system,additionally with 1 window, 1 window gasket,1 rubber plug, 2 fuses, 1 plastic funnel and 1m hoseAccessories:Paper filters (plus) 1 pack 10 11275Fine dust filter (plus)1 pack(3 fine dust filters, 1 motor protection filter,1 exhaust air filter) 11276Spare nozzle for recirculation 1 12136Spare gloves 1 pack 2 pairs 14554Spare windows 1 pack 6 15094Pencil jet 1.2 mm for Korox ® 250,Korox ® 110 and Perlablast ® (125 µm) 1 pack 2 14550Pencil jet 0.8 mm for Korox ® 50and Perlablast ® micro (50 µm) 1 pack 2 14549Pencil jet 0.6 mm for Korox ® 50and Perlablast ® micro (50 µm) 1 pack 2 14548Pencil jet 0.4 mm for Korox ® 25 1 pack 2 14547Korox ® 250 special corundum blasting material 8 kg/20 kg 46014/54300Korox ® 110 special corundum blasting material 8 kg/20 kg 46044/54299Korox ® 50 special corundum blasting material 8 kg/20 kg 46062/54298Korox ® 25 special corundum blasting material 8 kg 46036Perlablast ® blast-polishing material 8 kg/20 kg 46043/54301Perlablast ® micro blast-polishing material 8 kg/20 kg 46092/54302The integrated filter moduleThe filter module is a high-performanceunit for suction extraction of the dustgenerated during blasting. To additionallyretain the hazardous fine dust that canpenetrate into the lungs, filter material isused for which a test certificate has beenissued by the Institute for OccupationalSafety (BIA) of the German employers’liability insurance association.Easy changing of the economical paperprefilter bag. Depending on the type ofdust, the capacity is around 1 – 5 kg. Thefilter module begins operating as soon asthe blaster is switched on. The acousticsignal sounds when the filter is nearly full.If one does not react to it and continues towork until it is full, the module switchesoff. Then the blasting unit cannot be putinto operation again until the filter hasbeen replaced.Duostar ZBlasting unit like Duostar plus, but withoutintegrated suction extraction, designed forconnection to a central suction extractionsystem.Technical data:Duostar plus and Duostar ZHeight590 mmWidth365 mmDepth / with filter module (plus)425 mm / 550 mmRated voltage230 V, 50/60 HzSpecial voltageonly Z: 100 + 120 V, 50/60 HzPower at rated voltage 230 V810 W (plus), 60 W (Z)Lighting230 V/9 WCompressed air supply 4 – 6 bar (0.4 – 0.6 [MPa]), 1/4“Air consumptionapprox. 120 l/minCapacity recirculation system 8 kgpencil blaster700 g per containerWeight (excl. blasting material)33 kg (plus), 23 kg (Z)