Chapter 1 - Hartzell Engine Technologies

More documents

Recommendations

Info

Operating Instructions: (cont’d)9. Turn Power Switch off.10. Disconnect cables from battery terminals.NOTE: If the unit overheats, the test will end and aWarbling Tone will sound until the power is shut off.Unit Maintenance:1. The test unit requires little maintenance under normalusage. The unit should be kept clean with both the airinlet vent and the fan outlet clean and clear of debris.Ample space must be maintained on the air inlet andfan outlet for proper cooling.2. Cables should be checked for overheat damage withthe interconnect connector contacts and the terminalschecked for arc damage. Replace damaged contacts orconnectors.3. It is advisable that a calibration of the unit beperformed at least once a year or after a prolongedperiod of storage or non use. The unit must becalibrated using the instruction and test componentscalled out in the Hartzell Engine Technologies LLCBC3000-0003 Battery Capacity Analyzer FieldCalibration Procedure Manual. The manual isdelivered with the unit, however, it may also bedownloaded online at www.hartzellenginetech.com.6BC3000-0003 Battery Capacity AnalyzerOwners Manual ES1020
Parts List: (Fig. 2, 3, & 4)FIGURE 2Unit InterconnectCable AssemblyFIGURE 3Battery InterconnectCable AssemblyBC3000-0003 Battery Capacity AnalyzerOwners Manual ES10207
Page 3 and 4: Table of Contents..................
Page 6 and 7: Controls & Functions:FIGURE 1Unit F
Page 8 and 9: Controls & Functions: (cont’d)10.
Page 12 and 13: Parts List: (cont’d)FIGURE 4Batte
Page 14 and 15: Warranty & Contacts:WARRANTY:Hartze
Page 16: Technical Support and Warranty:•

Chapter 1 - Hartzell Engine Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?