UtiliTrak® Linear Guide - TEA Machine Components Inc.

Product Comparison and OverviewFeatures SW Series UtiliTrak ® PW Series UtiliTrak ® CR Series Stainless SteelComposite UtiliTrak ®Channel/ChannelAssemblyOne-piece ground carbonbearing steel channel, runningsurface smooth to Ra 0.8µm,hardened steel raceways, RoHScompliant anti-corrosion plated.6063 – T6 aluminium alloychannelInduction heat treated 420stainless steel DualVee ® trackmounted to an extruded aluminumchannel52100 carbon steel, ground,High temp polymer overmouldedStudded DualVee ®Guide Wheelsdouble row, angular contactbearing arrangement, availablesealed or shielded, internalon a stainless steel bearingarrangement, built-in wiper capsat each end clear debris from the440C stainless steel, double row,angular contact bearingarrangement, sealedlubricationchannel surfaceMadeWellCrown Rollers52100 carbon steel, ground,double row, angular contactbearing arrangement, availablesealed or shielded, internallubricationHigh temp polymer overmouldedon a stainless steel single rowdeep groove bearing,built-in wiper caps at each endclear debris from the channelsurfaceWheel Sizes 1, 2 and 3 0, 1 and 2 1, 2 and 3Wheel CarriageAssembly3, 4 or 5-wheel configuration 3-wheel configuration only 3-wheel configuration onlyLubricator &Wiper AssemblyNylon end cap with felt lubricator,one lubricator assembly on eachend, synthetic oilNylon end cap with felt lubricator,one lubricator assembly on eachend, synthetic oilStainless steel stamped feltlubricator with synthetic oil,centrally located lubricatorLoad Capacity Up to 14,040N Up to 311N Up to 5,739NSpeeds Up to 5.5 m/s Up to 1.0 m/s Up to 5.5 m/sAcceleration Up to 49 m/s 2 Up to 29 m/s 2 Up to 49 m/s 2Key BenefitsHigh speeds, excellent loadcapacity, smooth antifrictionoperation, debris tolerantLowest installed cost in its class,corrosion resistant, low noise,lightweight, wear resistantHigh speeds, excellent loadcapacity, smooth antifrictionoperation, debris tolerant,corrosion resistant