Ikarus A28 Ikarus A38 - AGROVOK-SERVIS, sro

More documents

Recommendations

Info

Flowmate Control FMCFirst main screenSpray functionsSecond main screenHydraulic functionsNozzle selection screenMemory screen spray data for 20 fieldsFlowmate Control FMC:• Extremely simple to operate with clear display screen.• Very compact, the integration of all spraying and hydraulicfunctions in one control box.• Unique ENFO features: Automatic priming and rinsing systemand agitation shut off for minimum rest liquid in the tank.Priming of spray lines before sprayingwith automatic section shut off:Accurate application from the firstsecond in the field.The section valves and electrichydraulicblocs are well protectedunder a removable cover at theback side close to the boom. Thiscontributes to minimize hoselength and to avoid high quantitiesof rest liquid in the spraylinesas part of ENFO strategy.Rinsing of spray lines with automaticsection shut off: Using the right up tothe last litre of pesticide and allowingthe plumbing system to be flushed withclean water during an interruption inspraying through bad weather etc.ERM pressure regulator: Compact and easily accessible.1 Emergency control: pressure regulation2 Emergency control: agitator shut off12• Two linear motors for pressurecontrol and agitation control.• Large integrated self cleaningpressure filter.• All electric functions can beoperated manually.• Control valves for high pressureagitation, tank cleaning, spraygun or outside cleaning kit.8
Technical specificationsIkarus A28 A38Nominal tank capacity (l) 2800 3800Maximum tank capacity (l) 3010 4000Capacity of clean water tank (l) 300 300Hand wash tank (l) 15 15Drawbar / Hitch linkage fixed Drawbar / Hitch linkage hand steering (+1DA) Drawbar / Hitch linkage electrical steering (oilcircuit needed) Drawbar / Hitch linkage auto steering (oilcircuit needed) Drawbar / top linkage fixed Drawbar / top linkage hand steering (+1DA) Drawbar / top linkage electrical steering (oilcircuit needed) Drawbar / top linkage auto steering (oilcircuit needed) Hitch eye bolted, height adjustable, 40 or 50 mm eye Manual parking jack PTO shaft single homocinetic single homocineticAttention: Auto steering and electrial steering are compatible with Flowmate Control FMC version oil circuitFixed axle 1.50-1.80m without brake (no upgrade possible) Fixed axle 1.50-1.80m with parking brake (up to 25km/h) Sliding axle 1.50-2.25m with parking brake (up to 40km/h) Sliding axle 1.50-2.25m suspended with parking brake (up to 40km/h) Upgrade hydraulic brake Upgrade pneumatic brake Tyre sizes, 8 hole rims 9.5 x 44 - 20.8 x 38 9.5 x 44 - 20.8 x 38Mudguard narrow for max 16.9 x 38 Mudguard wide Attention: sliding axle suspended with upgrade pneumatic brake 1.60 - 2.25Regulation system Flowmate Control FMC (Pre select version) Regulation system Flowmate Control FMC (Oil circuit version) Pump 200 l/min Pump 250 l/min Quick filling system (30% faster filling speed, depending on suction depth),only possible for single pump HSS booms (including symmetrical folding to 12m work width) 15 - 24 m 15 - 24 mHC booms (including slope correction, independent slope correction,symmetric and asymmetric folding and hydraulic locking) 18 - 24 m 18 - 24 mHE booms 18 - 27 m 18 - 27 mIndependent slope correction HSS Asymmetrical folding HSS Hydraulic balancing locking HSS Nozzle jet HSS 1 jet - 3 jet - 5 jet 1 jet - 3 jet - 5 jetNozzle jet HC 3 jet 3 jetAttention: HC boom always with oilcircuit and FMC oilcircuitTurbo agitation Chemical induction hopper (l) Suction hose 2” for non quick filling system Suction hose 2,5” for quick filling system Float for suction hose 2,5” Drain Manual border or verge nozzles Electrical border or verge nozzles (not for HE) Hydrant fitting Outside cleaning set Foam marker Fill flow meter Ponyflow stand alone Clean clothing locker Uria sieveSprayer dimensions and number of boom sections HSS 15 - 24 m HC 18 - 24 mTransport width(m) 2.50 2.50Total height of sprayer with boom (m) avarage/depends on wheels 3.70 3.90Total lenght of sprayer with boom (m) 5.40 5.755 section valves (boom width in m) 15 - 21 187 section valves (boom width in m) 24 20 - 24 = standard or variant equipment = option, factory fitted = accessory, dealer fittedThis documentation is not binding. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer.Specifications and design are subject to change without notice. Printed in Holland. © Kverneland Group9
Page 1 and 2: HSS boom 15-16-18-20-21-24 mHC boom
Page 3: Simple operator control layout.The
Page 6 and 7: HC booms18-20-21-24mEspecially desi
Page 10: Kverneland Group is one of theleadi

Ikarus A28 Ikarus A38 - AGROVOK-SERVIS, sro

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?