Product Tech Guide - Laminators Inc.

INSTALLATION SYSTEMSHighestCost1-PieceTight-FitMoldingInstallation System Cost Comparison2-PieceSnap-FitMoldingClip& CaulkDry SealRout& ReturnLaminators offers five different panel installationsystems to give you the look you need at the budgetedcost you require. Panels can be measured and cutat the job site…no prefabrication or comprehensiveshop drawings are necessary. Special panel lengthscan be ordered to minimize waste and reduce laborand materials expenses.1-Piece Tight-Fit MoldingPanel installation is easy using Laminators’ durable 1-piece moldings.A traditional yet high-tech appearance is obtained at an affordable cost.Both “H” and “reveal H” moldings are available. Unique effects can beobtained by combining our various installation systems.2-Piece Snap-Fit MoldingYou’ll like the contemporary look and the ease of “snap-fit” installation.Color-matched or contrasted aluminum molding snaps into place coveringfastener heads and caulk beads. Both flat and reveal effects are easilyobtained to give you the appearance you need at low cost.All molding bases can be attached to a wall surface prior to panelplacement, compared to other systems that require installation of moldingfor one panel at a time. 2-piece moldings are easily combined with othersystems to provide a variety of design options.Clip & CaulkLaminators has developed our unique Clip & Caulk system that greatlyreduces the total installed cost for ACM panels. This easy, field-provenmethod is the choice of architects and installers who are looking fora very flat look without visible fasteners. Panels can be cut onsite withfew peripheral accessories needed for installation. .Color-matched caulk gives a beautiful monochromatic look; contrastingcaulk can be used with eye-pleasing results.Use Clip & Caulk in combination with masonry, glass, 1-piece, or 2-piece extruded molding systems or by itself.You’ll be pleased with the flexibility, the appearance, and especially the cost.12 I