AIS - Automatic Identification System

AISfor ships in the futureAUTOMATIC IDENTIFICATION SYSTEMIntroductionAutomatic Identification System (AIS) is a technical systemthat makes it possible to monitor ships from other ships, andfrom shore based stations. AIS is a requirement. (see Internationalstandardisation below). AIS-equipped ships continuouslytransmit a short message containing information of position,course over ground (COG), speed over ground (SOG),gyro course (heading), etc. Ships equipped with AIS meetinganywhere on earth will be able to identify and track each otherwithout being dependent of shore stations.Shore stations will also get the same information from“AIS-ships” within the VHF area of the station when monitoringthe coastal areas and the ports. The AIS is using abroadcast and an interrogating self organised technology the socalled AIS STDMA/ITDMA that operates ship-to-ship andship-to-shore including limited communication capabilities.AIS does not require a radar.The International Telecommunication Union (ITU) hasdefined the technical standard and ratified the global frequencies.(see International standardisation below). InternationalElectrotechnical Commision (IEC) has accomplished the teststandard . (see International standardisation below). Thispamphlet will stress the advantages of the AIS, show how touse it and why the techniques can operate and handle theinformation from all ships even in the most dense shippingwaters of the world.ReginaC=076S=14.8This article about the shipborne AIS (Automatic IdentificationSystem) is published by the Swedish Maritime Administration.(SMA).Text by Captain/Pilot Benny Pettersson, SMA Sweden, assistedby Senior Development Engineer Rolf Bäckström, Finland.Updated Feb 2004 by Rolf Zetterberg.

RadarAIS139 17TargetMariellaIDGCOGSPEEDROTFlint VTS Malmö.VTSRadar is today the main sensor of the VTS to detect a ship.The VTS radar has almost the same errors in range and bearingresolution as all other radar’s, although it has a known positionand is North oriented without the errors of a compassinvolved. The limitations, of the ARPA radar to track ships dueto target swap to land, beacons, bridges and other ships, makesthe tracking facility in the ARPA rather limited.VTS’s are today limited to track ships, for instance, in a bayor when approaching a harbour from sea. There is a requirementfor improving of the VTS to be able to:● Cover areas where radar coverage is almost impossible toachieve, like rivers and archipelagos.● Identify radar blips on the VTS radar automatically.● Interrogate ships for information regarding type of cargo.● Track with a high up date rate, the ferry going between twoports in the bay or a river continuously, without needing toAIS for ships in the future 3

do it every time the radar tracking has swapped to anothertarget or, when the ferry has been moored to a pier or passedtoo close to a beacon or a passing ship.● Know which port a ship is bound for.● Know the size and the draft of ships in the vicinity.● Detect a change in a ship’s heading almost in real time.● Identify slowly moving targets, like log rafts, sounding arraysetc., which are unable to take rapid evasive actions.The only AIS solution, that could solve all the requirementsof the VTS, is a high update rate, mode AIS, with interrogatingcapabilities.The establishment of a landbased AIS reception network,may actually mitigate the need for VTS in some areas. The costof installing and maintaining an AIS network is minute comparedto a VTS radar net-work.Marine Search and Rescue (SAR)SAR operations would be much more efficient if all theRescue Units (RU) were fitted with AIS to quickly identify theship closest to a distress situation.During a search operation all the crafts could be tracked andplotted enabling the Marine Rescue Co-ordination Centres(MRCC) to monitor the progress, to direct the availableresources efficiently and to ascertain a search coverage withoutgaps. Furthermore, all surrounding ships and RU´s as well asthe MRCC could identify an AIS equipped ship in distress.The actual emergency status of the ship could also be determinedautomatically.Man Over Board (MOB) alarm will most probably be one ofthe features allowing all other ships in vicinity to have the sameMOB position displayed, when one of the ships have activatedthe MOB alarm.Fishing boats and pleasure craftsMost of the small ships will not be equipped with AIS whichmakes the radar the most important sensor to detect their existence.If mandatory AIS carriage requirement could be applied tofishing vessels, it would enable national fishing agencies toenforce fishing restrictions more efficiently.Shore based pilotage – headingThe captain on a ship with no radar or a radar disturbed bysea/ rain clutter and with a very weak radar return from shoreand navigational aids, may today be assisted with his navigationif he is able to get navigational assistance from shore.Shore based pilotage with radar is normally limited to smalland moderately sized ships which generally are more manoeuvrablethan, for example, large tankers. The limitations of radars,makes shore based pilotage suitable only in areas where thenavigable water is sufficient to separate the traffic, and wherethe ship could be supervised only by giving bearings to, forexample, waypoints.If only the DGPS position from a ship, but no heading, istransmitted via the AIS the VTS operator will get an exact positionof the ship’s antenna at the moment, as well as the speedand course over ground for the same antenna. The ships headingand the position of other parts of the same ship, at thesame moment, is howeverunknown. This uncertaintyof the real situationcould lead to mistakes ofimportance. For instance,a 350 meter long tankerwith the antenna situatedon top of the wheelhouseat the stern, starts to turnto starboard. The ship’scourse will then change tostarboard, but initially thestern with its antenna willswing slightly to port, asthe ship is turning aroundits so called pivot point.There is obviously, besidesto determine and transmitthe exact position of theantenna, a need to includethe heading in the transmission. The ARPA radar tracks thepart of the ship, which gives the best radar return, normally ona loaded tanker the superstructure at the stern. A big tanker,turning with the superstructure at the stern tracked by radar,could have turned 30-50 degrees, before this is detected by theARPA radar, on another ship or at the VTS, and now up to 4-5minutes has passed since the turn started.4 AIS for ships in the future

the inherent limitations of radars could be solved. The AIS alsoshows the navigational status of another ship with AIS, i.e. thattwo ships equipped with AIS, that meet in restricted visibility,have all the information, that the navigation lights could show,including name and and port of destination.The heading is taken from the compass and is not affected,neither when the AIS is using a high accuracy nor a low accuracypositioning sensor. The faster the nominal update rate is, thefaster the mariner on another ship, or an observer in a VTS, willdetect a course change. This means that a ship with high speedneeds a higher nominal update rate than a ship with slow speed.Type of shipShip at anchor or mooredShip 0-14 knotsShip 0-14 knots and changing courseShip 14 – 23 knotsShip 14 – 23 knots and changing courseShip >23 knotsShip >23 knots and changing courseReportinginterval3 min12 sec4 sec6 sec2 sec3 sec2 secPath predictionThe large potential of transmitting the rate of turn of the ship,together with all the other movement parameters, is still not fullyrecognised. This enables both the VTS and approaching ships tomake a rather accurate prediction of the path a ship is taking,some 30–90 seconds ahead. This gives more time and betterinformation for all the other players in the traffic environment toplan their moves.Route planningTo be able to improve the tracking and the detection of acourse change of a ship from other ships or from the VTS, ship’sheading and DGPS antenna position also have to be transmittedat a high update rate. The best way of transmitting this kind ofinformation would be, if vessels were equipped with an AIS workingin ”Beacon Mode” and a high update rate.RadarIt has been argued, that with an AIS display presenting AISships, the OOW will forget to ”fine tune” his radar to detectsmall crafts. It is important to emphasise, that the radar is andwill remain one of the most important instruments on the bridge,even in the future. It is important, that the OOW is taught thedifference between the radar and the AIS, and the importance oftuning the radar to detect small crafts without AIS onboard.Anti CollisionThe radar has been the primary mean to prevent collisions atsea in restricted visibility. The necessity to use a plotted ship’scourse and speed through water, to be able to get it’s actual headingas accurate as possible, is obvious. Still the difference incourse and speed through water, between a tanker and a carcarrierin a strong wind, is considerable.With an AIS the identification, heading and the change inheading could be determined with a high update rate and some ofShipping routes within a VTS area are normally well defined,including alternative routes between two points, to the point thatthey could be indexed. One could anticipate a requirement toplan the route of a ship in advance, either by the OOW or suppliedby the VTS. In either case the plan, consisting of the appropriateindex numbers could be interchanged utilising AIS. Thiswould enable interested parties to compare the planned route ofthe ship with the actual path taken.Short message communicationThe limitation of any radio system with all users on the samechannel is, the capacity. This is true both for voice and data communication.The proposed AIS would make it possible to utilise ashort message scheme, ie. to produce an indexed list of predeterminedtraffic messages. There could be addressed (point-to-point)messages like 1) “You are now within VTS area boundaries”, 2)“Switch immediately to VHF channel NN” and so on. In the lattermessage, the NN is an attribute, to be supplied by the user.The actual transmitted message is constituted of the index numberonly, together with the eventual attribute. If a common list ofmessages could be agreed upon, it should be multilingual, therebyavoiding mis-understandings because of language difficulties.In order to not impair the main function of AIS by overloadingthe VHF data link, has IMO (NAV 49) decided to limit the useof binary coded AIS messages. 7 different messages incl. meterologicalinformation is allowed for a trial period of 4 years.AIS for ships in the future 5

Silent VTSIn some areas of the world e.g. rivers and low traffic areaswhere the traffic density don’t justify VTS, an idea called”Selent VTS” has evolved. Instead of installing conventionalVTS’s on shore the AIS equipped ships will acct as their ownVTS’s and use the AIS to get their situation awareness.Display presentationThe AIS provides several possibilities for displaying the AISinformation. The minimum required display is a three linealpanumeric display that presents bearing, distance, name andall other information in a spread sheet format, enabling theOOW to make manual inputs and to identify a ship by comparingbaring and range from the radar PPI. Most probably theminimum display will be very rarely used. Many ECDIS manufacturesare today implementing the AIS symbols in theirequipments. Manufactures, as ADVETO, STN ATLAS,TRANSAS MARINE, ANS, ICAN are already handling theAIS in their softwares.It is sometimes not possible to present the AIS informationon an old radar screen but the new performance standard forradar which is developed by IMO includes presentation of AISinformation. AIS targets, superimposed on the radar display,will inform the operator weather the targets are AIS equippedor not.IEC has a draft proposal for AIS symbology to display onECDIS and or ENC systems.To reduce clutter on the radar or the ECDIS display, due totoo many AIS’s appearing at the same time the AIS symbolscould be “Active” or “Sleeping”.● “Active” means that a triangle is showing the targets headingand (if high accurate positions used) the COG/SOG vector.● “Sleeping” means that the mariner has chosen to suppressvectors and heading line and only a small green trianglepointing in the direction of the heading is shown. A sleepingtarget could always be activated if the mariner selects it.High update rateA modern ARPA radar is able to select and track 20 targetswith an update rate of 3 seconds. The symbol on the PPI willfollow the target, except when a target swap is appearing. Dueto the limitations of the ARPA, a course alteration of anothership will normally not be detected until one or two minutesafter the course change. For a large tanker it will take up to fiveminutes. Further more, another one or two minutes is neededfor the ARPA to present a reliable target vector with course andspeed through the water.It is obvious that a high update rate is needed for AIS targets,superimposed on a radar display. If the update rate is tooslow there will be situations, when using smaller ranges, wherethe AIS symbol will not catch up with the radar target.International standardisation for AISWithin ITUTechnical characteristics for a shipborne Automatic IdentificationSystem (AIS) using TDMA in the VHF maritimemobile band has been defined by ITU in ITU-R M.1371-1Frequencies to be used for the universal shipborne AIS hasbeen defined in ITU-R M.1084-3.Within IMOPerformance standards has been defined in IMO resolutionMSC.74(69) Annex 3Carriage requirements in SOLAS was originally approved byMSC 72 and MSC 73. An implementation period from 2002to 2008 was allowed. In 2001 when the security aspects of AISwas highlighted, IMO decided on an accelerated implementationfor ships on international voyages.Automatic identification systems (AIS)All ships of 300 gross tonnage and upwards engaged oninternational voyages and cargo ships of 500 gross tonnageand upwards not engaged on international voyages andpassenger ships, irrespective of size, shall be fitted with AIS,as follows:1. ships constructed on or after 1 July 2002;2. ships engaged on international voyages constructed before1 July 2002;● in the case of passenger ships not later than 1 July 2003;● in the case of tankers, not later than the first SafetyEquipment Survey after 1 July 2003;● in the case of ships, other than passenger ships andtankers, of 300 gross tonnage and upwards, not laterthan 31 Dec 2004;3. ships not engaged on international voyages constructedbefore 1 July 2002, not later than 1 July 2008. However, inSweden a faster implementation is required, starting in 2003and ending 2007.4. The Administration may exempt ships from the applicationof the requirements of this paragraph when such ships willbe taken permanently out of service within two years afterthe implementation date specified in paragraph 1. [Additionally,an Administration may exempt vessels flying its flagin its domestic trade from carrying AIS when operating inareas where in the judgement of the Administration the densityof shipping does not justify AIS].AIS shall:● provide automatically to appropriately equipped shorestations, other ships and aircraft information, including theship’s identity, type, position, course, speed, navigationalstatus and other safety-related information;● receive automatically such information from similarly fittedships;● monitor and track ships; and● exchange data with shore-based facilities. The requirementsof this paragraph shall not be applied to cases where internationalagreements, rules or standards provide for the protectionof navigational information. AIS shall be operated takinginto account the guidelines adopted by the Organization.Within IECIEC Technical Committee TC80 is now working hard to definethe test standard for a simplified AIS for non SOLAS-ships.6 AIS for ships in the future

The principle of AIS STDMA/ITDMAEach time slotrepresents26.6milliseconds.The AIS of ship Asends the positionmessage in one timeslot. At the sametime it reservesanother time slot forthe next positionmessage.The sameprocedure isrepeated by allother AISequippedships.Ship BShip CShip AShips with a self organizing broadcast AIS onboard will see each other as soon as they are in radio range.National and regional AIS systemsAn AIS network covering the Swedish coastal waters and thelarge lakes was established in 1997. The system was improvedand updated in 2001. The information from this network isavailable to the Swedish Maritime Administration for use inVTS:s, MRCC, pilot stations, Icebreaking Operation Centeretc. Other Swedish administrations needing information on thesea traffic also have access to this information.The Helsinki Commission, working with protection of theenvironment in the Baltic area, decided in 2001 that all thecoastal states of the Baltic shall establish landbased AIS stationsand exchange the information from these stations. The preparationfor that is under way and presently Sweden, Norway,Finland and Russia are exchanging AIS information viaInternet connections. The information will also be collectedand stored by a central server for creation of traffic statistics forthe Baltic Sea.The European Union requires in a Directive the member statesto establish shorebased AIS system before 1 July 2007.AIS for ships in the future 7

”Being in touch doesn’t mean being in command.” Make the OOW, pilot and the captain the ones, which benefitsthe most from an AIS system and it will increase the safety of shipping and navigation significantly in the future.ConclusionThe AIS is making the navigation safer by enhancing the possibility of detecting the wherabouts of other ships, even if they arebehind a bend in a channel or river or behind an island in an archipelago. The AIS will also solve the inherent problem with allradars, by detecting fishing boats and smaller ships, fitted with AIS, in sea-clutter and in heavy rain.Innovative technologies like ECDIS and ship-to-ship and ship-to-shore AIS, have a big potential in improving safety in the maritimefield in the future. It will also make it possible to identify, track and supervise ships from shore with a much higher and moresustainable accuracy than with a shore based radar.AISfor ships in the futureAUTOMATIC IDENTIFICATION SYSTEMFor further information please contact: Benny Pettersson, Swedish Maritime Administration, Box 27808, SE-115 93 Stockholm, Sweden.Fax: +46 8 666 66 90. E-mail: benny.pettersson@sjofartsverket.se.Rolf Zetterberg, Swedish Maritime Administration, SE-601 78 Norrköping, Sweden.Fax: +46 11 126 791. E-mail: rolf.zetterberg@sjofartsverket.se.Luftfartsverkets Tryckeri, Norrköping. 3169 2004