Wire Rope Assembly and Fittings - Hanes Supply, Inc

Oval EyeSW-707For hanger-type applications thatrequire smaller diameter pins and anarrower profile than large ringeyes, the Tuf-Grip SW-707 OvalEye is your best choice. These aremade with one-piece, drop-forgedsteel for dependable service.Measure the length from the bearing of the eye.Threaded Studs - TTSStyle TTS Threaded Studs aremachined from carbon steel speciallyselected for swaging. Alloy and stainlesssteel available upon request.Threaded Studs - STSBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Dimensions (in)Dash Rope ApproxNo. dia. D E F As Cs3 3/32 25/32 7/32 11/32 7/32 2-1/84 1/8 25/32 7/32 11/32 7/32 2-7/165 5/32 15/16 9/32 7/16 1/4 36 3/16 1-1/8 11/32 17/32 5/16 3-5/87 7/32 1-7/16 7/16 23/32 7/16 4-7/168 1/4 1-7/16 7/16 23/32 7/16 4-23/329 9/32 1-3/4 1/2 7/8 9/16 5-15/3210 5/16 1-3/4 1/2 7/8 9/16 5-3/412 3/8 2-1/8 5/8 1 5/8 714 7/16 2-3/8 3/4 1-1/4 3/4 8-3/3216 1/2 3 7/8 1-7/16 7/8 9-9/1618 9/16 3 7/8 1-7/16 7/8 10-5/32Rope A B EItem Dia. After Swage Approx. C Size NC NF Wt.No. (in) (in) (in) (in) (in) (in) (in) (lbs)TTS-8-A 1/4 1/2 4-23/32 1-1/2 1/2 13 20 .213TTS-8 1/4 9/16 4-23/32 1-1/2 9/16 12 18 .281TTS-10 5/16 5/8 5-23/32 1-3/4 5/8 11 18 .413TTS-12 3/8 3/4 6-3/4 2 3/4 10 16 .719TTS-14 7/16 7/8 7-21/32 2-1/4 7/8 9 14 1.125TTS-16 1/2 1 8-9/16 2-1/2 1 8 14 1.644TTS-18 9/16 1-1/8 9-5/8 2-3/4 1-1/8 7 12 2.325TTS-20 5/8 1-1/4 10-21/32 3-1/8 1-1/4 7 12 3.231TTS-24 3/4 1-1/2 12-11/16 3-3/4 1-1/2 6 12 5.513TTS-28 7/8 1-3/4 14-5/8 4-3/8 1-3/4 5 12 8.575TTS-32 1 2 16-21/32 5 2 4-1/2 12 12.600TTS-36 1-1/8 2-1/4 18-5/8 5-5/8 2-1/4 4-1/2 12 18.000TTS-40 1-1/4 2-1/2 20-21/32 6-1/4 2-1/2 4 12 24.687TTS-44 1-3/8 2-3/4 22-17/32 6-7/8 2-3/4 4 12 33.062TTS-48 1-1/2 3 24-1/2 7-1/2 3 4 12 49.300Note: Sizes for larger diameter ropes can be supplied. All Studs supplied without wrenchgrips unless requested. Right hand N.C. threads supplied unless otherwise specified.Rope A N.C. N.F.Item Dia. After Swage B C THD THD Items. Wt.No. (in) (in) (in) (in) (in) (in) No. (lbs)STS-4 1/8 7/32 2-3/8 1 1/4 - 20 1/4 - 28 STS-4 .025STS-6 3/16 5/16 3 1-1/8 3/8 - 16 3/8 - 24 STS-6 .069STS-8 1/4 7/16 4 -1/16 1-1/2 1/2 - 13 1/2 - 20 STS-8 .162STS-10 5/16 9/16 5-1/16 1-7/8 5/8 - 11 5/8 - 18 STS-10 .331STS-12 3/8 5/8 6-1/4 2-1/4 3/4 - 10 3/4 - 16 STS-12 .575STS-14 7/16 3/4 7-5/16 2-5/8 7/8 - 9 7/8 - 14 STS-14 .900STS-16 1/2 7/8 8-1/4 3 1 - 8 1 - 14 STS-16 1.362STS-18 9/16 1 9-1/4 3-3/8 1-1/8 - 7 1-1/8 - 12 STS-18 1.931STS-20 5/8 1-1/8 10-1/8 3-3/4 1-1/4 - 7 1-1/4 - 12 STS-20 2.662STS-24 3/4 1-1/4 12-13/16 4-1/2 1-1/2 - 6 1-1/2 - 12 STS-24 4.556STS-28 7/8 1-1/2 14-9/16 5-1/4 1-3/4 - 5 1-3/4 - 12 STS-28 7.137STS-32 1 1-3/4 16-1/4 6 2 - 4-1/2 2 - 12 STS-32 10.662STS-36 1-1/8 2 18-1/4 6-3/4 2-1/4 - 4-1/2 2-1/4 - 12 STS-36 15.625STS-40 1-1/4 2-1/4 20-1/4 7-1/2 2-1/2 - 4 2-1/2 - 12 STS-40 21.000STS-44 1-3/8 2-3/8 22-7/8 8-1/4 2-3/4 - 4 2-3/4 - 12 STS-44 30.500STS-48 1-1/2 2-5/8 24-3/4 9 3 - 4 3 - 12 STS-48 41.100Swaged FittingsHanes Supply of SC, Inc.CCISCO: 843.238.1338FAX: 843.238.8337Wire Rope Assembly & FittingsStandard Swaged Steel Threaded Stud - SSStyle SS Standard Swaged SteelThread Stud (Sleeves) are machinedfrom carbon steel specially selectedfor swaging. Alloy and stainless steelavailable upon request.Item Rope AFTER SWAGE DIMENSIONNo. Dia. (AS) Dia. BS TL Wt.(in) (in) (in) (in) (lbs) (lbs)+.00 +1/16SS-6 3/16 3/8 1-3/4 1 .050-.010 -0SS-7 7/32 7/16 2 1-1/4SS-8 1/4 1/2 2 1-1/4 .087SS-10 5/16 5/8 +.00 2-1/2 1-1/2 +1/8 .175SS-12 3/8 3/4 -.015 3 1-3/4 -0 .313SS-14 7/16 7/8 3-1/2 2 .506SS-16 1/2 1 4 2-1/4 .731SS-18 9/16 1-1/8 4-1/2 2-1/2 1.075SS-20 5/8 1-1/4 5 2-3/4 1.475SS-24 3/4 1-1/2 +.00 6 3 2.506SS-28 7/8 1-3/4 -.020 7 4 3.981SS-32 1 2 8 5 +3/16 6.000SS-36 1-1/8 2-1/4 9 6 -0 8.538SS-40 1-1/4 2-1/2 +.00 10 7 11.725SS-44 1-3/8 2-3/4 -.025 11 8SS-48 1-1/2 3 12 9 20.250Swage Fittings“Cold Tuff ® ” Button S-409• Special processed, low carbon steel.• “Cold Tuff ® ” for better swageability.• Swage Button terminations have anefficiency rating of 98% based on thecatalog strength of wire rope.• Stamp for identification after swagingwithout concern for fractures (as perdirections in National SwagingBrochure).NOTE: S-409Buttons are recommendedforuse with 6 x 19or 6 x 37, IPS orXIP (EIP), RRL,FC or IWRCwire rope.Wt. Before Swage Dim. After Swage Dim.PerD100 Max. AfterSize Stock Rope Pcs. Swage ENo. No. (in.) (lbs.) A B C Dim. Length1 SB 1040171 1/8 2 .44 .50 .14 .40 .613 SB 1040215 3/16 4 .56 .70 .20 .52 .845 SB 1040251 1/4 8 .63 1.06 .30 .58 1.207 SB 1040297 5/16 16 .88 1.13 .36 .77 1.338 SB 1040313 3/8 15 .88 1.48 .42 .77 1.699 SB 1040331 7/16 30 1.13 1.63 .48 1.03 1.9410 SB 1040359 1/2 50 1.31 1.89 .55 1.16 2.1711 SB 1040377 9/16 70 1.44 2.02 .61 1.29 2.4112 SB 1040395 5/8 100 1.56 2.42 .67 1.42 2.8913 SB 1040411 3/4 131 1.69 2.73 .79 1.55 3.2514 SB 1040439 7/8 220 2.00 3.27 .94 1.80 3.8615 SB 1040457 1 310 2.25 3.67 1.06 2.05 4.3616 SB 1040475 1-1/8 450 2.56 4.05 1.19 2.30 4.8117 SB 1040493 1-1/4 650 2.81 4.58 1.33 2.56 5.42NOTE: Length is measured from outside end of termination.3Wire RopeAssemblyand FittingsWWW.HANESSUPPLY.COM3-5