FLO2 - VES

The FLO 2 is an extraordinarily wide range of twin fan units forplantroom, ceiling void and external locations.This leaflet provides all the information you need to select andspecify in a straightforward manner.Main Features:• All fans and motors fully vibration isolated withincase. Additional anti-vibration mounts and flexibleconnections not required.• The auto-changeover panel is fitted to the unitand pre-wired to the fans and micro switches.The twin fan unit status indicator panel can beremote mounted using low voltage twin corecable, and fitted onto a single gang electrical box,or surface mounted.• All standard units will have a fitted local isolator.• The weatherproof units have a single louvredoutlet and are powder coat paint finished inlight grey to BS00A05 as standard.• Plantroom units supplied with galvanised sheetsteel cases, with optional powder coat paintfinishes.• Double skinned cases are standard on the FLO 2size 4 & 5 belt driven units and an option on allothers. Standard infill is resin bonded mineral woolslab. Heavy weight infill available for noise criticalapplications.• Bolt on silencers are available for all units to bothinlet and outlet.• Unit flanges match Mez flange system.• Drive guards available for belt drive units ifrequired.• Performance is guaranteed - all units tested inaccordance with BS 848 Part 1. In addition, allunits fall within the Building Regulations SpecificFan Power (SFP) maximum requirement of2.0 watts/litre/second, with the general exceptionwhen the selection point is of small volume andhigh pressure at the top end of the fan curve. TheVES Technical Department can advise the SFP atany duty.• Units comply with all relevant European directivesand are CE marked. VES Andover Limited are acompany of assessed capability by BSI to therequirements of ISO9001.2