Prof. K. Maddulety - the Nitie

Page 4 of 25Research Guidance:Post Graduate & Doctoral level Students (100 Plus), in the following areas:TQM, Six Sigma,Quantitative Modeling,Inventory Control Models,Lean Tools,SQC/SPCDesign of Experiments.Teaching and Research Interests:Experimental Designs/Design of ExperimentsTotal Quality ManagementOperations ManagementSix SigmaQuantitative ModelingTraining Programmes Conducted in the following areas (200 Plus):Taguchi Robust Engineering for Process Design OptimizationDesign of Experiments and ANOVA for Process OptimizationSix Sigma for Business ExcellenceLean Six Sigma for Business BreakthroughProcess Improvement through QC 7 ToolsISO-9001: 2000, ISO 9001:2008Five SLean ManufacturingSQC/SPC for Process Variation ControlTotal Quality ManagementAround 50% of the programmes have been conducted on open-house basis through NITIE,NCQM, QT&T Singapore, HRD Global Consultants, Maheswari Management Consultants, CATsInc. etc. in which approximately 1000 plus executives in the capacity ranging from AssistantManager to Executive Director have been trained.Around 50% in-house Programmes have been conducted to the Middle and Senior levelExecutives in the following Organizations:Ranbaxy, Dewas, IndoreOrdinance Factory, Trichi

Page 6 of 25Papers published in Refereed Journals and Proceedings:MadduletyKoilakuntla, Vishal S. Patyal, SachinModgil, PadmavatiEkkuluri(2012) , AResearch Study on Estimation of TQM ‘Factors Ratings’ Through Analytical HierarchyProcess, Procedia Economics and Finance, Vol 3, pp. 55-61, ISSN 2212-5671,10.1016/S2212-5671(12)00120-7.(http://www.sciencedirect.com/science/article/pii/S2212567112001207)Koialkuntla, M, along with Ashok Patole , Narkhede B.E, and Deshmukh S.P, (2012).“Process of Lean Six Sigma : An Academic Perspective”. Udyog Pragati, Vol 36, No 4,PP12-19 ISSN-0970-3365Patyal V, Agarawal, T, Modgil S and Koialkuntla, M (2012). The Impact of RFID andKnowledge Management to Strengthen Quality Assurance System. Gyan SamhitaResearch Journal, Vol 2, No 4 ISSN-2229-6654Modgil,S, Patyal,V, Koilakuntla,M (2012). Optimizing chemical process through robustTaguchi design: a case study. International Journal of Mechanical Engineering &Technology, Vol 3 No. 3, pp. 57-66Modgil,S, Patyal,V, Koilakuntla,M (2012).Total quality and supply chain managementapproaches to enhance operational performance: A framework. VIIT Journal . ISSN2278-6112Agrawal,T, Modgil,S, Koilakuntla,M, Patyal,V and Viswas, P.K (2012), “Role of RFID tominimize reverse logistics: A case study perspective”. Journal of Business andManagement, Volume 1, Issue 4, July-Aug. 2012.Koilakuntla, M, Modgil,M and Patyal,V. (2012), “Application of ‘Taguchi Design andAnalyses’ for ‘Molding Operation Optimization’ IEEE Explore, Proceedings ofInternational conference on advances in engineering, science and management,pp-85-92.Modgil, S, Patyal, V & Koilakuntla, M (2012), “Changing role of Total QualityManagement towards business performance with reference to organizationalvariables”, Proceedings of National Conference on Strategic Management: A GlobalChallenge”.Patole A.S, NArkhede, B.E, Deshmukh, S.P and Koilakuntla, M, (2011), “Lean Six Sigma ASynergistic Approach”, SIBACA Management Review, Vol. 1, No. 2, pp. 21-32Koilakuntla, M, (2011) “Application of ‘Taguchi Experimental Design’ for ProcessOptimization of ‘Tablet Compression Machine’ at HLL Lifecare, India,“International Journal of ‘Advances in Mathematical Sciences”’ for Volume 1, Number 2(June – Dec. 2011)

Page 7 of 25Pattanayak, D & Koilakuntla, M (2011) “Effect of TQM on customer satisfaction inIndian Banking Industry: A literature review” European Journal of Business andManagement, Europe, no.2, Vol 3,(http://www.iiste.org/Journals/index.php/EJBM/article/view/164/47)Koilakuntla, M & Padmavathi, E(2011) “Application of Robust Taguchi Design andAnalyses For “Condom Packing Operation Optimization” at HLL Life care Limited, India”,International Journal of Management Prudence, April, Vol.3(No.1), pp24-30Meshram, R & Koilakuntla, M (2011) “The Improvement in Availability, Performanceand Quality by Eliminating or Minimizing losses through TPM Approach”, Proceedings of‘National Workshop on Business Strategies for Emerging Market’, Organized by SIBACA,Lonavala, Pune, 25-27 February, pp 175-188Moggil, S, Patyal, V & Koilakuntla, M (2011) “A Research study on Internal CustomerSatisfactions Across Various Departments in Selected Companies”, Proceedings of‘National Workshop on Business Strategies for Emerging Market’, Organized by SIBACA,Lonavala, Pune, 25-27 February, pp 203-211Koilakuntla, M. (2011) “Impact of ISO 9000:2000 on selected Key PerformanceIndicators of Manufacturing Organizations in India, Management Prudence Journal, Vol2, (2),Phulpagar, S, & Koilakuntla, M. (2011) “Review of Models Used for Selection ofCorporate Strategies” Management Prudence Journal, Vol 2, (2)Balan, S, Koilakuntla, M., et al, (2011) “Applications of Data Envelopment Analysis as abenchmarking tool - Case Study” Management Prudence Journal, Vol 2, (2),Koilakuntla, M. (2011) “Design and Development of a Methodology for ‘Measurement-Uncertainty-Estimation’ through DoE & ANOVA”, International e-Journal of Mathematicsand Engineering, Vol 2, (2), 937 -946 ((http://internationalejournals.com/vol2_iss2-a101.htm)Koilakuntla, M. (2011), “A Research Paper on Measurement-Uncertainty AnalysesThrough DoE and ANOVA”, International e Journal of Mathematics and Engineering, Vol2, (2), 1000 -1011 (http://internationalejournals.com/vol2_iss2-a110.htm)Ahuja, R. and Koilakuntla, M. (2010) “A Methodology for deployment of InformationSecurity Management System” Industrial Engineering Journal, October, Vol II, No 16, 35-39Koilakuntla, M. (2010), “A Research study on ‘Design and Development of Industryspecific safety stock service levels for 27 composite classes of materials’”, IndustrialEngineering Journal, March, Vol II, No.9, 7- 11

Page 8 of 25Koilakuntla, M. (2007), ‘A Research Study On “Implementation of ISO-9000 in HindustanLatex Limited”, Proceedings of International Conference on Quality ManagementPractices, ITC Grand Club, 16-17 August, pp59 - 73Koilakuntla, M. (2007), “A Study on Development of Inventory Control Models for‘Hindustan Latex Limited (HLL)’”, Proceedings of National Conference, Institute of PublicEnterprise, Hyderabad, 22 -23 January pp183 -188Papers presented in Conferences:Patyal V, Modgil S, Koilakntla M and Umashankar C (2013). Productivity Improvement ofChemical Process through Taguchi Design. International Conference on Quality, Reliability andOperations Research. 7th-9th Jan, 2013.Koilakuntla, M, Modgil, S, Patyal, V (2012). Application of ‘Taguchi Design’ for ‘PeroxideProcess Optimization’. International conference of Society of Operations Management.21st -23rd December.Patyal V, Modgil S and Koialkuntla, M (2012). Process Factor Rating and Optimizationthrough Taguchi Design. International Conference on Optimization Modelling andApplications (OPTIMA) 29th – 01 December.Koilakuntla, M, Modgil, S, Patyal, V (2012). Spreader process optimization throughTaguchi Design. International conference on quality, reliability, infocom technology andindustrial technology management, University of New Delhi (India), 26th Nov. to 28thNov.Koilakuntla, M, Modgil, S, Patyal, V and and Ekkuluri,P (2012), “A Research Study onEstimation of TQM ‘Factors Ratings’ through Analytical Hierarchy Process (AHP)”.Emerging Markets Queries in Finance and Business. Tîrgu-Mureș, ROMANIA, 24th-27th,OctoberModgil,S, Patyal,V, Koilakuntla,M and Ekkuluri,P (2012), “Robust Taguchi Design andanalyses for process optimization through MINITAB software: an Industrial Experiment”-Quality and Productivity Research Conference-2012 (QPRC-2012)-California StateUniversity, Long Beach (USA), 4 - 7JuneKoilakuntla, M, Modgil, S, Patyal, V (2012), “Application of ‘Taguchi Design and Analyses’for ‘Molding Operation Optimization’ IEEE Explore – International conference on advancesin engineering, science and management, EGS Pillay Engineering College, Nagapattinam,India 30 -31 March

Page 9 of 25Modgil, S, Patyal, V, Koilakuntla, M (2012),“A Research Study on Application of Six SigmaDMAIC Methodology for Customer Complaints Reduction: A Case study Evidence”,International Conference on New development & challenges in engineering, technologyand management”, YT Group of Institutes Karjat, (India), 22 nd - 24 th MarchModgil, S, Patyal, V & Koilakuntla, M (2012), “Changing role of Total Quality Managementtowards business performance with reference to organizational variables”, NationalConference on Strategic Management: A Global Challenge”, Pune (India), 3-5 FebruaryKoilakuntla, M. (2011) “A Case Study: Application of Taguchi Approach for ProcessOptimization of Tablet Compression Machines of HLL Lifecare Limited India, “6thInternational Working Conference ‘TQM & AIA’’’, Belgrade, Serbia, 7th – 11th JunePatyal, V, Moggil, S, & Koilakuntla, M (2011) “Study on Impact of ERP on OrganizationsPerformance”, ‘National Workshop on Business Strategies for Emerging Market’, SIBACA,Lonavala, Pune, 25-27 FebruarySukate, B, Koilakuntla, M & Madala, K M, (2011) “Application of Basic Quality Tools forWastage Reduction in Batching Section of Selected Jute Mill” International Conference onIndustrial Engineering (ICIE-201), SVNIT, SuratSukate, B, Koilakuntla, M & Madala, K M, (2011) “Application of Basic Quality Tools forWastage Reduction in Weaving Section of Selected Jute Mill” International Conference onIndustrial Engineering (ICIE-201), SVNIT, SuratMeshram, R & Koilakuntla, M (2011) “The Improvement in Availability, Performance andQuality by Eliminating or Minimizing losses through TPM Approach”, ‘National Workshopon Business Strategies for Emerging Market’, SIBACA, Lonavala, Pune, 25-27 FebruaryMoggil, S, Patyal, V & Koilakuntla, M (2011) “A Research study on Internal CustomerSatisfactions across Various Departments in Selected Companies”, ‘National Workshop onBusiness Strategies for Emerging Market’, SIBACA, Lonavala, Pune, 25-27 FebruaryChaudhari, P, Hase, M & Koilakuntla, M (2011) “Fuzzy Neural Network and itsApplications in Travel Time Estimation”, ‘National Workshop on Business Strategies forEmerging Market’, SIBACA, Lonavala, Pune, 25-27 FebruaryPatyal, V, Modgil, S & Koilakuntla, M (2011) “Application of DMAIC Methodology forQuality Improvement in Molded Case Circuit Breakers”, ‘International Congress onProductivity, Quality, Reliability, Optimization and Modeling’, Organized by ISI, QCI andDRDO Jointly at Indian Habitat Centre, New Delhi, 7-8 FebruaryModgil, S, Patyal, V & Koilakuntla, M (2011) “A Research study on Application of Six Sigma(Shainin DoE) methodology to reduce the reverse flow of valve plate(used in compressor)at ABC Company”, ‘International Congress on Productivity, Quality, Reliability,Optimization and Modeling’, Organized by ISI, QCI and DRDO jointly at Indian HabitatCentre, New Delhi, 7-8 February

Page 10 of 25Koilakuntla, M. (2011) "Application of ‘DoE and ANOVA’ for ‘Measurement-Uncertainty-Analyses’", 13th International Conference on Quality 2011, Bangalore, 6 -7 JanuaryPramukh N Vasist & Koilakuntla, M. (2010), “Six Sigma Implementation in the telecomSector - Revenue Enhancement and Customer Retention” International Conference onDecision Sciences in Managing Global Services, ISDSI-2010, MDI, Gurgaon, 28-31DecemberModgil, S, Patyal, V & Koilakuntla, M. (2010), “Application of Lean Six Sigma to reducecost of Type-A MCCB at ABC Company”, TIMS National Conference, Tolani Institute ofManagement Studies, Adipur, Kachchh, 4-5 DecemberVaibhav, & Koilakuntla, M. (2010), “Designing Staffing Strategy for Railway TicketingCounters in India”, International Conference on “Statistics, Probability, OperationsResearch, Computer Science and Allies Areas”, ISPS-IISA and Department of Statistics,Andhra University, Visakhapatnam, 4-8 JanuaryAhuja, R, & Koilakuntla, M. (2010), “ISO 27001: A methodology for gap analysis andImplementation of ISMS”, ‘International Conference on Statistics, Probability, OperationsResearch, Computer Science and Allies Areas’ ISPS, IISA and Department of Statistics ,Andhra University, Visakhapatnam, 4-8 JanuaryVaghela, R, & Koilakuntla, M. (2010), “Designing and Developing a Scientific InventoryControl Models”, International Conference on Statistics, Probability, Operations Research,Computer Science and Allies Areas, ISPS, IISA and Department of Statistics , AndhraUniversity, Visakhapatnam, 4-8 JanuaryVaghela, R & Koilakuntla, M. (2010), “Framing Relocation Strategy for Optimal use ofManufacturing Facility”, International Conference on Statistics, Probability, OperationsResearch, Computer Science and Allies Areas ISPS, IISA and Department of Statistics,Andhra University, Vishakhapatnam, 4- 8 JanuaryKoilakuntla, M. (2009), “A research study on Impact of Six Sigma on Selected KeyPerformance Indicators”, Ninth International Conference on Operations and QuantitativeManagement, Loyola Marymount University, Los Angeles, USA, 27 – 30 JunePattanaik, D, & Koilakuntla, M. (2009), “Comparative Study of Quality Awards”,International Conference on ‘Service Quality Excellence and Challenges & Strategies, ITM &NCQM, 16 - 17 FebruaryUpadya, R, & Koilakuntla, M. (2009), “Future Research Prospects in Six Sigma”,International Conference on ‘Service Quality Excellence and Challenges & Strategies, ITM& NCQM, 16 - 17 FebruaryKoilakuntla, M. (2009), “Impact of ISO 9000:2000 on selected KPIs of ManufacturingOrganizations in India”, National Conference, ‘Management Science and Practices (MSP2009)’, IIM Ahmedabad ORSI & AMA, 13-15 February

Page 11 of 25Vijaya Kumar, & Koilakuntla, M. (2009), “Distribution Management of Canteen Service forOptimal Results”, National Conference, ‘Management Science and Practices (MSP 2009)’,IIM Ahmedabad, ORSI & AMA, 13-15 FebruaryKoilakuntla, M. (2008), “Sampling and Testing Frequency Design”, InternationalConference, “New Trends in Statistics and Optimization”, Department of Statistics,University of Srinagar, 28th Annual Convention of Indian Society of Statistics andProbability, 20-23 OctoberKoilakuntla, M. (2007), “A Research Study on “Implementation of ISO-9000 in HindustanLatex Limited”, International Conference on Quality Management Practices, ITC GrandClub Mumbai, 16-17 AugustKoilakuntla, M. (2007), “A Research Study on Performance Appraisal”, National Seminaron High Performing Organizations: Issues and Challenges, SIBER School of Management,Kolhapur, 5-6 MarchKoilakuntla, M. (2007), “A Study on Development of Inventory Control Models for‘Hindustan Latex Limited (HLL)’”, National Conference, Institute of Public Enterprise,Hyderabad, 22 -23 JanuaryKoilakuntla, M. (2005), “A study on ISO 9000 & QS 9000 Quality System in Selected Units”ICPQR, IIT, Delhi, 12-15 DecemberConferences & Workshops Participated:A work shop attended on ‘Statistical Modeling and Data Analysis (2012), Indian Instituteof Technology, Kharagpur, 10-15 December 2012National Workshop on Recent Advances in Data Mining and its Applications (2011),Department of Statistics, Andhra University, Vishakhapatnam, 11-14 MarchNational Workshop on Business Strategies for Emerging Market (2011), SIBACA, Lonavala,Pune, 25-27 FebruaryInternational Congress on Productivity, Quality, Reliability, Optimization and Modeling’(2011), Organized by ISI, QCI and DRDO Jointly at Indian Habitat Centre, New Delhi, 7-8February13 th International Conference on Quality (2011), NIQR, Bangalore, 6-7 JanuaryIntroduction on Robust Optimization, (2011), Shin Taguchi, Bangalore, 8-9 JanuaryNational Training School Programme (2010), Design Modeling and Analysis of Experimentsthrough Taguchi Philosophy, MSRIT, Bangalore, 23 -27 AugustConference on ‘Theory of Inventive Problem Solving (TRIZ)’, (2010), Alliance India,Mumbai, 8 May

Page 12 of 25National Workshop on ‘Design of Experiments and Applications’, (2010), Department ofStatistics, Shivaji University, Kolhapur, 17-20 FebruaryInternational Conference on Statistics, Probability, Operations Research, ComputerScience and Allies Areas, (2010), ISPS, IISA and Department of Statistics, Andra University,Visakhapatnam, 4-8 JanuaryWorkshop on ‘Statistics, Distribution Theory and Directional Data Analysis,(2010), ‘ISPS,IISA and Department of Statistics, Andhra University, Visakhapatnam’ 2-3 JanuaryWorkshop on Assessment for Business Excellence, (2009), Institute of Quality, CII,Bangalore, 21-24 DecemberNinth International Conference on ‘Operations and Quantitative Management’, (2009),Loyola Marymount University, Los Angeles, USA, 27 – 30 JuneNational Conference on ‘Management Science and Practices (MSP 2009)’, ORSI and AMA,IIM Ahmedabad, 13-15 FebruaryAttended the Finishing School on Environmental Management, (2009), ‘EnvironmentalManagement Centre and NITIE, Mumbai’ 16-19 JanuaryTransition Workshop on ISO 9001:2008, (2009), NCQM, Mumbai, 15 JanuaryNational Workshop on ‘HR Score Card for Business Results’ (2008), ‘HRD GlobalConsultants, Mumbai’, 27-28 DecemberNational Workshop on Recent Advances in “Decision Support Models and theirApplications (2008)”, Department of Statistics, SV University, Tirupati, 10-14 DecemberInternational Conference on “New Trends in Statistics and Optimization”, Department ofStatistics, (2008), 28 th Annual Convention of Indian Society of Statistics and Probability,University of Srinagar, 20-23 OctoberMDP on Strategic Management- A Competitive Perspective, (2008), Fagu, Shimla , 5- 7SeptemberNational Workshop on ‘Innovative Quality Practices, Six Sigma and Robust Design for e-Business’,(2008), Bangalore, 10-14 MarchWorkshop on ‘Optimization and its Applications’ (2007), New Convention Centre,University of Delhi, Delhi, 29 November – 3 December“XI Annual International Conference of Society of Operations Management” (2007),‘Symbiosis Institute of Operations Management (SIOM), Nasik’, 21-23 December

Page 14 of 25Application of Taguchi Designs & ANOVA, National Workshop, Andhra University,Vishakhapatnam, 2010Designing and Developing Service Levels for Composite Classes of Materials,International Conference organized by ‘ISPS, IISA and Department of Statistics, AndhraUniversity, Vishakhapatnam, 2010Basic 7 Quality tools for problem solving, SIBACA, Lonavala, 2010Experimental Designs for Process Validation, Loyola Marymount University, LosAngeles, USA, 28-29 June 2009Importance of Statistical Software for advanced computing, SSR, Silvasa, 2009Taguchi Robust Design for Process Optimization, CATS, Mumbai, 2007-2009Importance of Process Capability Analysis in Service Industry, LMT SOM, ThaparUniversity, 2006-2009Measurement System Analysis by using Minitab software, LMT SOM, Thapar University,2006-2009Quality Control Charts by using Minitab, Vikrant Institute of Technology &Management, Indore, 2008Application of Advanced Statistical tools in Six Sigma Methodology, InternationalConference, Department of Statistics, University of Srinagar, Srinagar, 2008Application of Quantitative Tools for Strategic Decisions, Fagu, Shimla, 2008Application of AHP in Six Sigma Methodology, National Workshop, MSRIT, Bangalore,2008Application of FMEA in Six Sigma Methodology, National Workshop, MSRIT, Bangalore,2008Importance of ‘Five S’ for imparting Quality Education, AAEHS, Mumbai, 2006-2007Applications of Fractional Factorial Design, Workshop on ‘Optimization and itsApplications’ New Convention Center, University of Delhi, Delhi, 2007Quantitative tools for Process Improvement, IIITM, Gwalior, 2005-2006TQM Deployment Strategy in Manufacturing Units, IIITM, Gwalior, 2005Six Sigma Methodology for Business Excellence, KIT, Kolhapur, 2002-2005

Page 15 of 25Qualitative tools for Problem solving, BBA College, Sankeswar, 1997-2004Control Charts for Monitoring & Control of Business Processes, BBA College, KLE,Nipani, 1997-2004Fractional Factorial Designs by using Minitab, SOM, Mangalore, 2003Implementation of Six Sigma for Process Improvement, National Workshop,KLC,University of Wales, KualaLumpur, Malaysia , 2-6 November 2003Design of Experiments for Process Optimization, IIM, Indore, 2003Extracurricular Activities:Guidance & Counseling to the unauthorized absentees (Employees)Programmes on Pollution & Environment to Village People and SaplingsDevelopment of various departmental manuals of ISO 14000 (EMS)Development of various departmental manuals of ISO 9000 (QMS)Industry Experience (15 years):Deputy General Manager (Operations), HRD Global Consultants, Hyderabad, India, May -Aug. 2005Deputy Manager (QMS & Six Sigma), HLL, Kanagala, India, Nov. 2001 - April 2005Senior Assistant Plant Manager (Plant In-charge), HLL, Kanagala, India, Feb. 1997- Nov.2001Senior Assistant Plant Manager (Packing In-charge), HLL, Trivandrum, India, Aug. 1992-Feb. 1997Assistant Plant Manager (Plant Duty Officer), HLL, Trivandrum, India, Aug. 1990 - Aug.1992Contributions to Industry (Hindustan Latex Limited):I have Undergone training at Hindustan Latex Limited (HLL) after graduation in 1990 and tookup the position of Assistant Manager at Hindustan Latex Limited in Trivandrum. I have spent 15years in HLL and witnessed enrichment of experience in numerous areas. I have more than 20

Page 16 of 25years of total experience in the industrial sector blended with the Academia. I have Industryexperience in various managerial & technical functions such as:Policy Framing: I have been trusted by the Management for Policy Formulation and developedexcellence. It included Organizational Development, Career Development, Employee Training inAdvanced Management Tools and Techniques, Companywide IT Deployment Policy, ManpowerDeployment Policy, Employee Involvement Policy, Quality Deployment Policy, Involved inFraming Corporate Policy – “Vision 2010 for becoming 1000 Cr. Company’.Planning & Scheduling: Operational Level planning and Scheduling integrated with corporateannual turn around, Breakthrough improvements in all the processes of business throughproper planning and scheduling of EMS, QMS, and Six Sigma projects.Quality Management: Successful Implementation and management of employee involvementthrough suggestion scheme, quality circles, productivity circles, statistical quality control, 5S,introduction and Implementation of ISO -9001, ISO-14001 and Six Sigma.Human Development by Providing Training in the areas: Quality Circle, Productivity,Suggestion Scheme, Basic Problem Solving Tools, Employee Involvement, Quantum Quality,Total Quality Management, Total Productivity Maintenance, Internal Auditor Training for ISO9001 & ISO 14000, Six Sigma Yellow Belt Programme, Application of DoE for manufacturingprocess optimization and Application of Taguchi designs for Process Validation,More than 1000 plus Employees went through the above process at Trivandrum Unitand Kanagala unit of HLL, finally enhancing profitability.System & Information Technology: Designed and Developed Blueprint for introduction of‘Integrated Management Information System (IMIS)’ with the help of TCS Consultants. 100%involvement for developing Production Module of IMIS by TCS

Page 17 of 25Personnel Management: Involved in designing and developing Personnel Manual, SuccessionPolicy, Manpower Rationalization, Structure, Job Evaluation, Manpower Study, CorecompetencyMapping, Promotion, Transfer, Design of Appraisal System, Wage NegotiationConducted HLL specific research study for designing Performance Appraisal SystemAverage Overtime reduced to 7% from 25% of Gross SalaryImprovement Management Through: Introduction and Implementation of Quality Circle,Productivity Improvement Tools, Suggestion Scheme, Basic Problem Solving Tools, Total QualityManagement, Total Productivity Maintenance, Internal Audits for ISO 9001 & ISO 14000;Quality Management Projects, Environment Management Projects, Six Sigma Projects.Advanced tools such as VSM, PWT, SQC, SPC, MSA, Process Capability Analysis, Lean Tools, DoE,ANOVA, Taguchi Robust Design, etc.,Number of Suggestion’s improved from 20 to120 per yearNumber of Employees Participating in QC went up to 50%Profitability went up to 15% per year through successful completion of QualityManagement Projects, Environment Management Projects and Six Sigma Projects.Selected Professional Affiliations:Member, Board of Examinations, Indian Institute of Industrial Engineering, Belapur,Navi Mumbai, Since 2008Life-Member, Operation Research Society of India, Kolkata (0837/K/09/ML), Since 2008Life-Member, Society of Operations Management, Bangalore, Since 2008Life-Member, Indian Association for Productivity, Quality and Reliability, Kolkata(0109295), Since 2008Member, All India Management Association, New Delhi. (M-200711004), Since 2007Active Life-Member, Indian Institute of Industrial Engineering, Mumbai (LM-9158 (21)),Since 2007Life Member, National HRD Network, Mumbai Chapter, Since 2006Senior Life Member, National Center for Quality Management, Mumbai, India, Since2006Life-member, Quality Circle Forum of India, Hyderabad, India, Since 2003

Page 18 of 25Additional Information:Major News on Achievements of Dr. K. Maddulety:News Published (in Telugu Language) on 4 th January 2010, in Andrajyothi, Vishakha Cityedition about his expert talk in International Conference. A copy of Scanned news isattached as Annexure-1.Annexure -1

Page 19 of 25Honored by “Asia’s Best Professor in Operations Management Award” by CMO Asiaand CMO Council, at Suntec, Singapore on 22nd July 2011Above Award News Published in News Papers:Edited and scanned the published news in Hindi paper Pukar dated 29 th August 2011

Edited and scanned the published news in Hindi papers ‘Samna’ and ‘Nav Bharat ‘ on18/08/2011 and 29/08/2011 respectively.Page 20 of 25

Page 21 of 25Honored by “Best Professor in Operations Management Award” by World EducationCongress, at Taj Palace Dubai on 25th Sept. 2011

Page 22 of 25Honored by ” Best Teacher in Operations Management” for the year 2011, by DewangMehta Business School Award at Taj Lands End, Mumbai, India

Page 23 of 25Honored by B Schools Professors who Continuously Innovate in Style & Substance forAcademic Excellence” for the year 2012 by DNA & Stars of the Industry Group at at TajLands End, Mumbai, India

Page 24 of 25Honored with most coveted institutional and globally reputed presentation „Bharat Jyoti Award‟along with Certificate of Excellence‟, for my Outstanding Services, Achievements andContributions by DR BHISHMA NARAIN SINGH, Ex Governor for seven states (Assam,Meghalaya, Sikkim, Arunachal Pradesh, Pondicherry , Tamilnadu and Andaman & Nicobar) andby T S. KRISHNAMURTI, Ex. Chief Elections Commissioner of India in the function organizedby IIFS, at Speaker Hall, Constitution Club of India, New Delhi on 4 th May 2012.From right to left on the dais 3 rd : DR BHISHMA NARAIN SINGH, Ex Governor for sevenstates (Assam, Meghalaya, Sikkim, Arunachal Pradesh, Pondicherry , Tamilnadu and Andaman& Nicobar) 2 nd : T S. KRISHNAMURTI, Ex. Chief Elections Commissioner of India. Off thedais: Dr. Koilakuntla Maddulety who is receiving the Award.