manual module interface USB - DMX512 - English

More documents

Recommendations

Info

USB - DMX512Connection of the DMX512 unitsAny hardware working with the DMX512 protocol can be connected tothe module USB - DMX512. Interconnection of the individual modules is doneas a data bus, where a terminator has to be connected to the last unit. Do notconnect devices in a star topology or other unsuitable one. The control of units isindependent and their address is set up according to a table provided by themanufacturer.Diagram of a connection of modules using DMX512Module USB - DMX512 http://www.soh.cz/ Page 6
USB - DMX512DimensionUSB - DMX512Technical specificationInput connectorOutput connectorSupply of the moduleCurrent consumptionWeightWorking positionOutputGuaranteeDriver downloadUSB B3 pin XLRfrom USB70 mA0.012 kgany safe positionDMX512 (EIA-485)30 monthsdrivers.svetla.orgModule USB - DMX512 http://www.soh.cz/ Page 7
Page 3 and 4: Successfully installed hardware can
Page 5: Connection of the DMX512 cableWhen

manual module interface USB - DMX512 - English

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?