Cat.6a Hirose TM31 Patch Cable Art.-No. K8560XX.x

Cat.6a Hirose TM31 Patch CableArt.-No. K8560XX.xComponents (plug):• 2 x 37642.S - TM31DP Cat.6a plug• 2 x 37642.P - TM31P-88P(62) guide plate• 2 x 37641.7 - Strain relief boot TM21Components (cable):with S/FTP PiMF DRAKA UC900 1000 MHz cableK8560GR.X grey K8560SW.X black K8560GN.X greenK8560BL.X blue K8560OR.X orange K8560WS.X whiteK8560RT.X red K8560GE.X yellow• 2 x Hirose TM31, Cat.6a, halogenfree• TIA/EIA 568B codedAvailable lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0• 9970X.x - Patch cable Cat.7 PiMF UC900 SS27 S/FTP• Standards: EN-50173-1; EN 50288-4-2; ISO/IEC 11801,IEC 61156-5• Flame retardance: IEC 60332-1; IEC 60754; IEC 61034• Bending radius: > 25 mm (without strain relief)> 50 mm (with strain relief)• Temperature range: -20°C up to 60°C (static)0°C up to 50°C (moved)ConstructionConductorInsulationStrandingPair shieldingStrandingTotal shieldProtective sheathCopper bare, d=0.42 mm, AWG27/7Foam-Skin Polyethylen, d=0.98 mm2 cores to a pairAluminium laminated plastic composite foil4 Pairs (PiMF) to the coreCopper braid, tinned (ca. 45% coverage)LSZH01.10.0901.10.09Patch Cable Cat.6aHirose TM31 / DrakaK8560XX.xRoHScompliantK8560XX.x_ENG

uc09ss27s-ftp_e24.04.2007Page 1 of 3UC900 SS27 Cat.7S/FTPApplicationTertiary (horizontal)IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMStandardsEN 50173-1; EN 50288-4-2ISO/IEC 11801; IEC 61156-5Flame resistancePVC: IEC 60332-1LSHF (FRNC): IEC 60332-1; IEC 60754-2; IEC 61034ConstructionConductor stranded bare copper wire Ø 0.42 mm (AWG 27/7)InsulationFoam Skin Polyethylene, Ø 0.98 mmTwisting2 cores to the pairPair screenAl-laminated plastic foilCable lay up4 pairs (PiMF) to the coreScreenCopper braid, tinnedSheathPVC or LSHF, color see “Technical data”www.drakact.com I www.draka.comkoeln.info@draka.com

uc09ss27s-ftp_e24.04.2007Page 2 of 3UC900 SS27 Cat.7Mechanical propertiesBending radius without load 25 mmwith load 50 mmTemperature range during operation -20°C to + 60°Cduring installation 0°C to + 50°CElectrical properties at 20°C± 5°CLoop resistanceResistance unbalance 3% 340 Ω/kmInsulation resistance (500 V) 2000 MΩ*kmMutual capacitance at 800 Hz Nom. 43 nF/kmCapacitance unbalance (pair/ground) 1500 pF/kmCharacteristic impedance(1-100 MHz) (100 ± 15) Ω(100 - 250) MHz(100 ± 18) Ω(100 ± 25) Ω(250 - 600) MHzNominal velocity of propagation ca. 79 %Propagation delay 427 ns/100mDelay skew 12 ns/100mTest voltage (DC, 1 min) core/core and core/screen 1000 VTransfer impedanceat 1 MHz 25 mΩ/mat 10 MHzat 30 MHz 15 mΩ/m 30 mΩ/mElectrical data (nominal)acc. to Cat.7 (at 20°C)F Attenuation NEXT PS-NEXT ACR ELFEXT PS-ELFEXT Return loss(MHZ) (dB/10m)(dB)(dB) (dB/100m) (dB/100m) (dB/100m) (dB)1.0 0.3 90 87 90 80 77 234.0 0.6 90 87 89 80 77 2410.0 1.0 90 87 89 80 77 2516.0 1.3 90 87 89 76 73 2520.0 1.4 90 87 89 74 71 2531.2 1.8 90 87 88 70 67 2562.5 2.6 90 87 87 64 61 23100.0 3.2 87 84 84 60 57 21125.0 3.6 85 82 81 58 55 20155.5 4.0 84 81 80 56 53 19175.0 4.3 83 80 79 55 52 19200.0 4.6 82 79 77 54 51 18250.0 5.1 81 78 76 52 49 18300.0 5.6 80 77 74 50 47 17450.0 6.9 77 74 70 47 44 17600.0 7.9 75 72 67 44 41 17750.0 8.7 73 70 64 42 39900.0 9.7 72 69 62 41 38www.drakact.com I www.draka.comkoeln.info@draka.com

Plug :TM31P-TM-88P1. Plug design satisfying CAT6a performance(No.1,2,7,8⇒short contacts /No.3,4,5,6⇒long contacts)2. Simplified assembly method by guide plateGuide plate(Clear yellow)3. Steady cable assembly procedure4. AWG24-27, stranded PIMP cable is applicable5. IDC and clamping process can be implemented by same specific toolNo.3,4,5,6(Long contact)No.1,2,7,8(Short contact)Shield(Common to TM31P)Plug housing(Clear yellow)Copyright C 2007, HIROSE ELECTRIC CO.,LTD.

Plug :TM31P-TM-88PPlug design satisfying CAT6a requirements1) Unique contact arrangementCAT6 Plug (TM21DP-TM-88P)CAT6a Plug (TM31P-TM-88P)Improved TransmissionCharacteristics1 8 1 8Limited performance due to the contactarrangement in a single rowThe contact arrangement in two rowsmakes performance improved(No3, 4, 5, 6 contacts are isolated fromNo1, 2, 7, 8 contacts)Copyright C 2007, HIROSE ELECTRIC CO.,LTD.

Plug :TM31P-TM-88PCable assembly method to have CAT6a performancePlug design makes it possible for users to lengthen jacket endand have steady CAT6a performance.Step4 Step5 Step6Copper tape17mmCopyright C 2007, HIROSE ELECTRIC CO.,LTD.

Plug :TM31P-TM-88POuter Appearance of TM31P-TM-88P with coverTM31P-TMTM-88P can be assembled with TM21 covers.Our CAT6A modular plug is consist of just 3 parts.1. Plug Body (TM31P-TMTM-88P)2. Guide Plate (TM31P Guide Plate)3. Cover (TM21 Cover)Copyright C 2007, HIROSE ELECTRIC CO.,LTD.

Plug :TM31P-TM-88PApplicable CableJacketPIMF cableShield pairShieldConductorConductorAWG 24 stranded wireAWG 27 stranded wireO/D of Insulatorφ 0.9 to φ 1.0InsulatorO/D of Jacketφ 5.8 to φ 6.0Cable Assembly ToolCable Assembly Tool of TM21DP-TM-88Pcan be also used for TM31P-TM-88PCopyright C 2007, HIROSE ELECTRIC CO.,LTD.

Plug :TM31P-TM-88PCAT6a Performance Measurement : Plug singleTM31P Model sampleMeasurement Method : Direct Probe MethodMeasurement Equipment : Network NAnalyzer(Agilent E8357A)Frequency : 10~500MHzDirect Probe ToolCopyright C 2007, HIROSE ELECTRIC CO.,LTD.