EFB Elektronik GmbH Datasheet

DatasheetEFB Elektronik GmbHO6141.1 Breakoutcable ST/ST 2G 62,5/125µ, 1 MNettogewicht1,0052,60Länge(g)Breite 0,00 Zollposition 85447000Breakoutkabel MM0,00HöheArtikelgruppe ST-STKatalogseite037Breakoutcable 2G 62,5/125 2x2 STI-V(ZN)HH 2G 62,5/1252 x ST-connector each sidesimilar pic

FutureLink Modular Indoor CablesBreakout Cables with InfiniCor ® 300 FiberT-VHH....G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC ORApplicationFutureLink breakout cables are particularly suitable for placing and pulling into cable conduits and shafts(building backbone and horizontal subsystems), also underfloor, for use as jumper and adapter cablesand for connecting workstations inside buildings (FttD).They can also be used as inter-building cables laid in dry conduits.Easy and direct infield connectorization is possible with enhanced strain relief.Central member,metal-freeTight bufferStrength members,metal-freeFRNC-sheathFRNC-Outer sheathRip cord (4 fibersupwards)Tight buffer TB3Example on T-VHH 12G62,5L/125 ...Strength members,metal-freeFRNC - sheathFRNC-outer sheathIssued byCorningCorning Cable SystemsGmbH & Co. KGKistlerhofstr. 170D-81379 München, DeutschlandHotline:Tel. + 49 (0)180 / 530 67 67Fax + 49 (0)95 68 / 93 20 82http://www.corning.com/cablesystems.deSubject to availability and technical changewithout noticeCopyright © Corning 2002[LCXLI2_M30xx_A720_021002_e.doc]

Seite 2 von 3FutureLink Modular Indoor CablesBreakout Cables with InfiniCor ® 300 FiberT-VHH....G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC ORCharacteristicsTested for their laser performance to FOTP 204Optimized for VCSEL launch conditionsGuaranteed minimum distances for Gigabit Ethernet and 10 Gigabit Ethernet transmissionTight-buffered fiber of 900 µm diameter (TB3), easy to stripLow smoke according to IEC 61034 zero halogen (LS0H)Flame retardant according to IEC 60 332-3 and non corrosive according to IEC 60 754-2 (FRNC) and DINVDE 0472 Teil 813No ground loop or potential equalization problemsDry design (no gel)Especially suitable for field installable UniCam connectorsPre-assembled cables are available upon requestDesignStandard fiberType: Multimode InfiniCor ® 300 G62,5L/125 fiberCore diameter: 62,5 ± 3,0 µmCladding diameter: 125,0 ± 1,0 µmCoating diameter: 245 ± 5 µmNumerical aperture: 0,275 ± 0,015Effective group index of refraction at 850 nm: 1.496Effective group index of refraction at 1300 nm: 1.491Colour code of fibers according to Telcordia (Bellcore)Further fiber data are available upon request (fiber datasheet)Tight bufferTight buffer, flame retardant and zero halogenColour code of tight buffers: the marked wire blue and the following whiteDiameter: 0,9 mmBasic element1 central tight buffer, strength members as additional strain reliefOuter sheath flame retardant and zero halogenColour of jacket: orangeWall thickness: 0,7 mmDiameter: 2,9 mmCable2 buffers without central member, parallel in common outer sheath flame retardant and zero halogen,orange, wall thickness: 0,5 mm4 up to 12 buffers in one layer around central member, common outer sheath flame retardant and zerohalogen, orange, wall thickness: 0,9 mmIssued byCorningCorning Cable SystemsGmbH & Co. KGKistlerhofstr. 170D-81379 München, DeutschlandHotline:Tel. + 49 (0)180 / 530 67 67Fax + 49 (0)95 68 / 93 20 82http://www.corning.com/cablesystems.deSubject to availability and technical changewithout noticeCopyright © Corning 2002[LCXLI2_M30xx_A720_021002_e.doc]

Seite 3 von 3FutureLink Modular Indoor CablesBreakout Cables with InfiniCor ® 300 FiberT-VHH....G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC ORCharacteristicsOptical characteristicsTypical attenuation at 850 nm: 3,1 dB/kmTypical attenuation at 1300 nm: 0,8 dB/kmBandwidth-length product (OFL=Over Filled Launch) for 1 km at 850 nm: ≥ 200 MHz x kmBandwidth-length product (OFL=Over Filled Launch) for 1 km at 1300 nm: ≥ 500 MHz x kmGuaranteed minimum distances for Gigabit Ethernet at 850 nm: 300mGuaranteed minimum distances for Gigabit Ethernet at 1300 nm: 550mGuaranteed minimum distances for 10 Gigabit Ethernet at 850 nm: 33mMechanical characteristicsNumber ofFibersOutsideø[mm]Weight[kg/km[Tensile strength forinstallation [N]Bend radius forinstallation [mm]Bend radius inoperation [mm]Fire rating[MJ/m]2 3,9x6,8 30 ≤ 400 ≥ 70 ≥ 60 0,524 8,9 75 ≤ 800 ≥ 160 ≥ 135 1,276 10,7 108 ≤ 1200 ≥ 190 ≥ 165 1,888 12,5 150 ≤ 1600 ≥ 220 ≥ 190 2,6412 16,4 260 ≤ 2400 ≥ 285 ≥ 245 4,61Temperature rangeDuring installation: -5°C up to +50°CDuring operation: -20°C up to +60°CDuring transport and storage: -25°C up to +70°COrder InformationType designation: T-VHH 2G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC OROrder number 2 fibers: LCXLI2-M3002-A720Type designation: T-VHH 4G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC OROrder number 4 fibers: LCXLI2-M3004-A720Type designation: T-VHH 6G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC OROrder number 6 fibers: LCXLI2-M3006-A720Type designation: T-VHH 8G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC OROrder number 8 fibers: LCXLI2-M3008-A720Type designation: T-VHH 12G62,5L/125 3,1B200 + 0,8F500 TB3 FRNC OROrder number 12 fibers: LCXLI2-M3012-A720Issued byCorningCorning Cable SystemsGmbH & Co. KGKistlerhofstr. 170D-81379 München, DeutschlandHotline:Tel. + 49 (0)180 / 530 67 67Fax + 49 (0)95 68 / 93 20 82http://www.corning.com/cablesystems.deSubject to availability and technical changewithout noticeCopyright © Corning 2002[LCXLI2_M30xx_A720_021002_e.doc]