15540 UpRight SL20 - Facelift

IF THE PLATFORM SHOULD FAIL TO LOWER, NEVERCLIMB DOWN THE ELEVATING ASSEMBLY.The emergency lowering valve knob is located at the rear ofthe chassis.1) Open the emergency lowering valve by pulling and holdingthe knob.2) To close, release the knob. NOTE: The platform will notelevate if the emergency valve is open.TRAVEL WITH THEPLATFORM ELEVATEDNOTE: WORK PLATFORM WILL TRAVEL ATREDUCED SPEED WHEN PLATFORM IS ELEVATED.1) Check that route is clear of persons, obstructions, holesand drop-offs, is level and capable of supporting thewheel loads.2) Check clearances above, below and to the sides of platform.3) Turn selector to DRIVE position.4) Push joystick FORWARD or REVERSE for desired directionof travel.5) If the machine is not level the tilt alarm will sound and themachine will not lift or drive. If the tilt alarm sounds, theplatform must be lowered and the machine moved to alevel location before attempting to re-elevate the platform.AFTER USE EACH DAY1) Ensure that the platform is fully lowered.2) Park the machine on level ground, preferably under cover,secure against vandals, children and unauthorised operation.3) Turn the key switch to OFF and remove the key to preventunauthorised operation.THIS MACHINE IS NOT INSULATED. FOLLOW YOURNATIONAL SAFETY STANDARDS AND MAINTAIN THEREQUIRED SAFETY DISTANCE WHEN WORKING NEARENERGISED EQUIPMENT.3