MiniMod Brochure.pdf - OptoLum

SpecifyMMPRODUCTProduct DimensionsActual SizeOPTIC10°28°60°LED COLORWarm White27 -2700°K30 -3000°K35 -3500°K40 -4000°K*Cool White45 -4500°K*50 =5000°K**special order colorProject NameFirm NameCOATINGU -UncoatedC -ConformallyCoatedDateFixture TypeMiniModFinishC -Natural ClearN -Brite NaturalB -BlackZ -Medium BronzeW -White Powder CoatO -Custom© OptoLum Inc. 2012 - OptoLum reserves the right to change specifications for product improvement without notificationOptionsOpticsOur high efficiency lenses are made of optical gradePMMA and are available in narrow 10°, medium 28°, andwide 60° beam spreads.Finish OptionsThe standard finish specification for the MiniMod’saluminium housing allows for a selection of anodized orpowder coated finishes. Additional custom order finishesare available for an additional cost.CoatingAn optional conformal coating may be specified. Thiscoating is optically clear and is applied over the circuitryand LEDs prior to final assembly.Control SystemsThe MiniMod can be infinitely dimmable using OptoLum’sVariLum dimming controller. The MiniMod is alsocompatible with most 0-10 systems and PWM systems.Please refer to OptoLum’s Power Supply SpecificationSheets for dimming component requirements.ElectricalOptoLum Low Voltage LED luminaires require remotepower supplies, which must be ordered separately. TheMiniMod is wired in series with a standard cable lengthbetween modules of 3’-0.” Additional options for cablelengths are available upon request. Changes in cablelengths will affect wire gauge and cost. A 60W powersupply can accommodate a maximum of 10 luminaires. A96W power supply can accommodate up to 10 luminaires,up to 18 luminaires may be possible with custom wiring.OptoLum Inc., 1407 West 10th Place Suite 107 Tempe, Arizona 85281 t 480 968 2500 f 480 968 3005 e info@OptoLum.com w OptoLum.com