11.07.2015 Views

timer - Zibro

timer - Zibro

timer - Zibro

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

WHAT YOU NEED TO KNOW IN ADVANCEALWAYS MAKE SURE THAT THERE IS SUFFICIENT VENTILATIONFor each <strong>Zibro</strong> Kamin model the minimum size of space is specified in which youcan use the heater safely, without additional ventilation (refer to Section P). If aparticular room is smaller than the specified space, always leave a window or doorslightly ajar (± 2.5 cm). We also recommend doing this in highly insulated ordraught-free rooms and/or at altitudes above 1,500 metres. However, if there isinsufficient ventilation (i.e. oxygen), the heater will automatically switch off. Donot use your <strong>Zibro</strong> Kamin in cellars or other underground areas.Only the use of thecorrect fuel will ensuresafe, efficient, andcomfortable use of your<strong>Zibro</strong> Kamin.THE RIGHT FUELOnly use Class C1 paraffin fuel in accordance with BS2869: Part 2, or equivalent.Your <strong>Zibro</strong> Kamin heater has been designed for use with high-quality water-freepure paraffin oil, such as <strong>Zibro</strong> Plus. Only fuels of this kind will ensure clean andproper burning. Lower quality fuel may result in: increased possibility of malfunctioning incomplete burning reduced heater lifetime smoke and/or smells deposits on the grid or mantleUsing the right fuel is therefore essential for safe, efficient, and comfortable useof your heater.Always refer to your local <strong>Zibro</strong> Kamin dealer for the right fuel for your heater.AThe fuel cap cover canbe found at the rear ofthe heater. This coverallows you to keep yourhands clean whenopening the fuel tank.This transportation capis packed separately inthe box. Only this capensures trouble-freetransportation of theheater after use.Store it well!424

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!