Baldwin Estate Price Book - Top Notch Distributors, Inc.

HOW TO ORDER & INSTALLATIONPRIVACY2˝ Privacy Rose Installation5097 BackplateROSEA B CROSE RETAINERINSTALLATIONA. After completing the latch and backplate installation,a hole for the privacy button needs to be drilled.The first step is to remove the alignmentBushings and spindle used for thebackplate installation process.B. Attach the roses to the backplates using the roseretainers and tighten with the supplied spanner tool.DESPANNERTOOLHOLELOCATIONMARKEDHOLELOCATIONPRIVACYBUTTONUse a pencil to mark the privacy holelocation on each side of the door.C. To avoid damage, remove both roses andthe latch before drilling the privacy holes.D. Drill a 1/4” diameter hole throughboth sides of the door.Caution: To assure proper hole location drill fromeach side of the door and not from one side only.E. Re-install the latch and re-attach both roses.1/4”DIAMETERHOLEOn the inside of the room, thread the privacy buttoninto the latch and install the knobs or levers.Mortise Lock w/ Emergency Release TrimHOW TO ORDERWHAT YOU NEED PART # EXAMPLE PAGE #Knob or Lever – pair Minus Rose (.MR)5000.150.MRPassage Rose* – pair (no suffix) 5002.150Emergency Release Trim – 0404.150Turn Piece 6756.150Mortise Lock, 2.5˝ Backset (Handled) 6315.150.L 121Spindle* – 4˝ 0511.004 50Mortise Lock w/ Escutcheon PlateHOW TO ORDERWHAT YOU NEED PART # EXAMPLE PAGE #Knob or Lever – pair Minus Rose (.MR)5000.150.MREscutcheon Plate, Exterior6797.15.KEEscutcheon Plate, Interior6797.150.KTMortise Lock, 2.5˝ Backset 6315.150 121Spindle* – 4˝ 0511.004 50ASSUMED FOR EXAMPLES:Backset – 2.375˝Door thickness – 1.375˝NOTE: for PRE-DRILLED DOORS, Rose/Escutcheon must be at least 2.625˝ diameter/wide to cover bore hole*See Spindles Chart for length neededFOR ORDERING HANDLESETS, REFER TO THE INNER FLAP OF THE BACK COVER