Untitled

ACCESSORIES 156/157INSTALL FLOOR-LEVEL SHOWERSSIMPLY WITH THE INSTALLATIONSYSTEM FRAME ESR IITHE MOST COMPELLING ARGUMENTS FOR THE ESR II:• no moisture or building damage of any kind caused by defectivesilicon sealant• optimal safety with creep water connection on ESR II• very short assembly times and extremely versatile heightadjustment• straightforward maintenance is possible• perfect noise insulation in accordance with DIN 4109/A1 andSIA 181• long-term price advantages for operators and investors• suitable ESR II for each of the following models (for depths 6 cmand below): ARRONDO, BELLEZZA, CONOFLAT, CORNEZZA,FONTANA, SUPERPLAN and SUPERPLAN XXLSTRAIGHTFORWARD, SIMPLE INSTALLATIONThe ESR II allows fl oor-level shower trays to beinstalled quickly and precisely with optimal stability.Depending on the requirements, various siphonvariants are available each with creep waterconnection. With this complete system you have allthe components required to install super-fl atshower trays quickly and easily.The Kaldewei ESR II guarantees floor-level showersto be installed without damage caused by moisturepenetration.ESR IIEstablish the siphon position and thecourse of the connection. Create thefl oor cavity or recess with suitable aids.Connect siphon trap to the wastewater pipe and carry out drainage test.Then insert the ESR II pre set.Assemble creep water connection andadjust the ESR II accurately. Then fix theframe with the enclosed fi ttings.Stick on fleece butyl sealing tape. Ifnecessary, fi ll the gap between the floortiles and the foot frame with supportingmaterial.By inserting the installation aids, thewalls and fl oors can now be tiled withouthaving to install the shower tray.The shower tray is installed and thesiphon connected to the showertray. Then the grooves are fi lled withpermanent elastic sealant.