download (PDF) - RODCRAFT Pneumatic Tools
download (PDF) - RODCRAFT Pneumatic Tools
download (PDF) - RODCRAFT Pneumatic Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessory for Pistol Sanders<br />
Backing pads in various hardnesses,<br />
adapter for use of standard 5/8”<br />
accessory and adapter for drill<br />
chuck thread size 3/8”-24.<br />
Please see also<br />
page 61<br />
Sanding with Angle Grinders<br />
Angle sanders can be used with<br />
backing pads, fibre discs and flap<br />
discs as well as brushes.<br />
Diameters of backing pads that fit our<br />
<strong>RODCRAFT</strong> angle tools:<br />
Model 7166 (M14x2) 115 mm<br />
125 mm<br />
Model 7120 (5/8”) 178 mm<br />
Model 7121 (M14x2) 178 mm<br />
Model 7181 (M14x2) 178 mm<br />
Model 7183 (5/8”) 178 mm<br />
Please see also<br />
page 40/41<br />
Practical accessory that can be<br />
attached quickly<br />
For spot repairs, sanding, rust<br />
removal, stripping paint.<br />
Please see also page 60<br />
Model Drive<br />
3<br />
Pistol and Angle Sanders<br />
for flexible fibre discs up to<br />
115 mm<br />
adjustable speed<br />
3<br />
www.rodcraft.com<br />
Fast pistol sanders with adjustable speed (and power) for fibre discs.<br />
For safety reasons this tool cannot be used with hard cutting and<br />
grinding discs, please see our models 7160 - 7166 with speed<br />
governor.<br />
pistol sander<br />
protective guard for 7150<br />
backing pad 80 x 22 mm<br />
backing pad 115 x 22 mm<br />
backing pad 140 x 22 mm<br />
adapter with M14 x 2 AG<br />
for flexible fibre discs up to 178 (7”) mm<br />
cold-insulated with rear exhaust<br />
Model Article no.<br />
RC7150 8951072021<br />
7150-S 8951011538<br />
316-2 8951011544<br />
416-2 8951011545<br />
516-2 8951011548<br />
A7150 8951011449<br />
Ergonomically optimised angle grinder with cold-insulated handle, silencer and rear exhaust. Ideally<br />
suited for sanding of metal surfaces and stripping of paint or other coatings.<br />
With easy maintenance grease plug for fast regreasing of the angle gear. Additional side handle can<br />
be mounted on both sides to serve also left handed persons.<br />
Two type of thread available:<br />
model 7120 with 5/8” thread and backing pad,<br />
model 7121 with M14x2 thread for standard M14 accessory<br />
angle sander with 5/8” backing pad (178 (7”) mm)<br />
angle sander with M14x2 thread (without accessory)<br />
backing pads for flexible fibre discs 178 (7”) mm - 5/8” IG<br />
lock nut for backing pad 5/8” IG<br />
two-hole key for lock nut<br />
backing pad, velcro 150 (6”) mm – 5/8” IG<br />
backing pad, velcro 150 (6”)mm – M14X2 IG<br />
Model Article no.<br />
RC7120 8951072001<br />
RC7121 8951072011<br />
716-2 8951011546<br />
8950250605<br />
8950290097<br />
KT150 8951011554<br />
KT150M14 8951011605<br />
Please order lock nut and zwo-hole spanner along with any order of the backing pad.<br />
Power Speed Weight Inner Hose<br />
Diameter<br />
Dimension<br />
a x b x c x d<br />
Air Consumption<br />
average – continuous<br />
Air Inlet Noise<br />
Tige Disque [mm] [W] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]<br />
RC7120 5/8” AG 178 500 4500 2.0 8 320x38x100 525 700 1/4” IG 91.4 2.7<br />
RC7121 M14 x 2 AG 178<br />
75x22<br />
500 4500 2.0 8 320x38x100 525 700 1/4” IG 81 2.7<br />
RC7150 7/16”- 20 AG 105x22<br />
115x22<br />
400 18000 1.15 8 152x157x38 410 570 1/4” IG 81 3.2<br />
1/4”- 20UNF<br />
RC7681K<br />
AG<br />
50V (2”)<br />
75V (3”)<br />
150 15000 0.4 8 120x125x42 365 490 1/4” IG 74.6 5.9<br />
max. pressure 6.3 bar (90 psi) V: velcro IG: female thread AG: male thread<br />
norms applied : noise according to ISO15744, vibration 3-axis according to ISO28927-3, more detailed specs see page 69.<br />
LpA<br />
Vibration<br />
39