download (PDF) - RODCRAFT Pneumatic Tools

40
3
Angle Grinders
for mini cutting discs
70 or 76x10 mm
direct drive
for 115 (4 ½”) and 125mm (5”) discs
for 100mm (4”) discs
for 178 (7”) mm discs
industrial
2
2
Mini cutting grinder ready equipped with a 75x10x1,5 mm cutting disc and protective guard
made of steel. With safety lever and rear exhaust.
mini cutting grinder
mini cutting discs
Model Article no.
RC7190 8951075101
70TR 8951011536
Very famous and compact type of angle grinder with safety speed governor,
protective guard and flanges. The side handle for additional control can be
taken off for confined areas. Very versatile for many applications like
sanding with flap discs, grinding, cutting. Available for 16 or 22 mm centre
hole accessories or pads and brushes with thread e.g. small M14x2 cup
brushes and radial brushes as well as backing pads for use of normal and
velcro fibre discs up to 125 mm (guard removable). Can be delivered
alternatively with two types of thread M10x1,5 and M14x2 two sorts of flanges
16 and 22 mm as well as for three sizes of discs 100x16 mm (4”) and
115x22 mm (4 ½”) / 125x22 mm (5”):
angle grinder M14 x 2 for discs 115 (4½”)/125(5”) x 22 mm
angle grinder M10 x 1,5 for discs 115 (4½”)/125(5”) x 22 mm
angle grinder M10 x 1,5 for discs 100 (4”)x 16 mm
cutting discs 115 (4½”)x 22 mm
grinding discs 115 (4½”)x 22 mm
cutting discs 100 (4”)x 16 mm
grinding discs 100 (4”)x 16 mm
Model Article no.
RC7166 8951075051
RC7165 8951075041
RC7160 8951075021
115TR 8951011539
115SCH 8951011542
100TR 8951011537
100SCH 8951011540
Robust industrial quality angle grinder with safety speed governor,
protective steel guard (can be turned without locking in positions)
and flanges. Easy to control grinder with detachable side handle.
The typical applications for each type of grinder are:
For grinding, cutting and flap discs with 22 mm centre hole.
For threaded abrasives with inner thread M14x2 or 5/8” eg cup
brushes or radial brushes, as well as backing pads for velcro and
fibre disc use up to 178 mm (guard can be removed)
angle grinder with flange set 22 mm for discs 178 (7”) x 22 mm
angle grinder M14 x 2 for discs and M14 x 2 accessory
angle grinder 5/8” for discs and 5/8” accessory
cutting discs 178 (7”) x 22 mm
backing pads for flexible fibre discs 178 (7”) mm - 5/8” IG (for 7183)
lock nut for backing pad 5/8” IG
two-hole key for lock nut
velcro pad 150 (6”) mm 5/8”IG
velcro pad 150 (6”) mm M14X2 IG
Model Article no.
RC7180 8951075071
RC7181 8951075081
RC7183 8951075091
178TR 8951011541
716-2 8951011546
8950250605
8950290097
KT150 8951011554
KT150M14 8951011605