download (PDF) - RODCRAFT Pneumatic Tools

c
maintenance units (5 micron)
c
spray painting unit (0,01 micron)
b
power regulator °
b
a
a
1/4” G 10 / 0 - 10 2220 100
1/2” G 17 / 0 - 10 3000 200
thread
(inch)
pressure
(IN / OUT)
(bar)
max. air
flow rate
(l/min)
oil
capacity
(ml)
dimension
axbxc
(mm)
model
article no.
1/2” IG 17 / 0 - 10 3000 200 174 - 160 MD2LAK-12 8940168482
operating temperatures -20°C* – 65°C * air supply must be dry enough to avoid ice formation at temperatures below 2 °C
(reduces power and speed).
1/4” IG – 1/4” AG AR 1 8951011858
1/4” IG – 1/4” AG DG 1 R 8951011860
1/4” IG – 1/4” AG DG 1 8951011859
1/4” IG – 1/4” AG DG 1 R 8951011860
Maintenance Units, Water Separators,
Filters, Regulators, Lubricators, Lubricants
Delivers clean, dry and lubricated air at constant pressure for air tools and other compressed air activators:
water separator with automatic drain, filter element with 5 micron, micro-fog lubricator with flow sensor for almost constant
oil/air ratio for several air tools in use, oil sight dome allows 360° visibility as well as simple adjustment and installation,
metal bowls with bajonet quick release and prismatic full level sight windows for high inlet pressure and increased safety,fast
element clamping system allows front access and individual removal of elements, wall fixation bracket
2 piece slim version : water separator – filter – regulator and gauge + lubricator
3 piece low height version : water separator – filter + regulator and gauge + lubricator
pressure gauge: diameter 40 mm, 0-10 bar / 90 psi for FRL units 1/4" - article no. 8940169178,
diameter 50 mm, 0-10 bar / 90 psi for FRL units 1/2" - article no. 8940169180
thread
(inch)
swivel air joint ° (for best operatability in confined areas) inline filtre °
° for connection into tool air inlet IG: female thread
AG: male thread
Lubricants for air tools
pressure
(IN / OUT)
(bar)
max. air
flow rate
(l/min)
oil
capacity
(ml)
inline lubricator °
dimension
construction axbxc
(mm)
model article no.
2 piece 220x107x100 MN2-14 8940168574
G1K
G1G
220x165x100 MN3-14 8940168575
255x150x125 MD2-12 8940168576
255x232x125 MD3-12 8940168577
operating temperatures -20°C* – 65°C (**-34°C* – 80°C)
* air supply must be dry enough to avoid ice formation at temperatures below 2 °C
Delivers extremely clean and oil-free, dry air at constant pressure for spray guns and other oil-free running air tools :
water separator with automatic drain, filter element with 5 micron, high efficiency oil and particle removal filter element with
0,01 micron (oil removal class level 2 – 0,01 mg/m³) and filter service indicator shows red when filter needs replacement, air
distribution block with 2 outlets and air valves, metal bowls with bajonet quick release and prismatic full level sight
windows for high inlet pressure and increased safety, fast element clamping system allows front access and individual
removal of elements, wall fixation bracket water separator – filter – regulator and gauge + coalescing filter + distribution
block + air valves
characteristics
(in-out)
special air lubricant
(contains silicone)
impact system oil
(for pin-clutch type)
model
model
3 piece
2 piece
3 piece
(for mobile use e.g. on construction sites)
article no.
characteristics model article no.
(in-out)
1000 L, 1 litre air lubrication oil in bottle with nozzle
1000 S, 1 litre impact system oil in bottle with nozzle
1/4” IG - 1/4” AG (4 ml*) G 1 K 8951011851
1/4” IG - 1/4” IG (28 ml*) G 1 G 8951011852**
3/8” IG - 3/8” IG (28 ml*) G 2 8951011853**
1/2” AG - 1/2” AG (28 ml*) G 3 8951011854**
1/4” IG - 1/4” AG (12 ml*) G 1 M 8951011856
* oil capacity ** adjustable
1/4” FT – 1/4” AG F 1 G 8951011855
article no.
8951011861
8951011862
65