INSTRUCTION MANUAL RX.HELIX - uri=merkel-die-jagd

_____________________________________________________________________It is recommended to repeat the locking procedure of the barrel fastening several times(2 – 3 times) in order to reach an optimal barrel centering in the system case._____________________________________________________________________ATTENTIONTHE CLAMPING LEVER MUST BE HORIZONTAL TO THE AXIS OF THE BORE(FIGURE 9).(8) Place forearm back onto barrel from front, the button must completely click intoposition. (Figure 10)Figure 10(9) Push magazine back in until magazine catches click into place on both sides.2.4.3 Caliber change with bolt head changeDANGERMAKE SURE THAT THE WEAPON IS UNCOCKED PRIOR TO EVERY BARRELAND/OR CALIBER CHANGE (COCKING SLIDE IN REARMOST POSITION).(1) Remove magazine from system case by pressing both magazine catches (Figure4).(2) Press push button at forearm and simultaneously take off forearm to the front.(Figure 5).(3) Push bolt all the way forward using the bolt handle.(4) Release barrel fastening using the clamping lever. (Figure 6)(5) Take off barrel with bolt head to the front. (Figure 11)