INSTRUCTION MANUAL RX.HELIX - uri=merkel-die-jagd

3 Disassembly / Assembly of the Weapon3.1 Disassembly into ComponentsDANGERBEFORE DISASSEMBLING THE WEAPON IT MUST BE UNLOADED. IT MUST BECHECKED WHETHER THE BARREL AND THE CARTRIDGE CHAMBER AREEMPTY.CAUTIONONLY DISASSEMBLE THE WEAPON TO THE EXTENT DESCRIBED IN THISMANUAL.Initial state:- Weapon unloaded- Bolt locked (bolt handle in foremost position)- Weapon uncocked (cocking slide in rearmost position)(1) Remove magazine from system by pressing both magazine catches (Figure 4).(2) Press push button (Figure 5) and pull off forearm to the front.(3) Pull back bolt until stop by using the bolt handle (if necessary seedescription in section 2.3.3)(4) Release barrel fastening with clamping lever. (Figure 6) Take off barrel to the front.ATTENTIONWHEN DISASSEMBLE THE WEAPON, ALWAYS ACT WITH CARE ANDACCURACY BECAUSE THE TOLERANCES AND FITTINGS ARE VERY NARROW._____________________________________________________________________We recommend that further disassembly works should be done by a gunsmith._____________________________________________________________________