LINEAR UNITS

Linear Ordering Units
Ordering Keys
Linear Units with Belt Drive and Slide Guides
M50
Your Code
1 2 3 4
Example MG05B130 A00 R 560
1. Type of unit
MG05B130 = M50 unit
2. Type of carriage
A00 = single standard carriage
M55, M75, M100
Your Code
3. Drive shaft configuration
R = shaft on the side as shown in picture
Q = shaft on the side as shown in picture
X = shaft on both sides
4. Ordering length (L order)
• • • = distance in cm
1 2 3 4 5 6
Example MG06B105 A 00 X 450 +S2
1. Type of unit
MG06B105 = M55 unit
MG07B130 = M75 unit
MG10B176 = M100 unit
2. Type of carriages
A = single standard carriage
C = double standard carriages
3. Distance between carriages (Lc)
00 = for all single standard carriage units
• • = distance in cm between carriages
4. Drive shaft configuration
R = shaft on the side as shown in picture
Q = shaft on the side as shown in picture
X = shaft on both sides
5. Ordering length (L order)
• • • = distance in cm
6. Protection option 1
+S1 = wash down protection
+S2 = chemical protection
1 Leave blank if no protection option required.
R Q X
R Q X
203