PRODUCT INFORMATION Product Summary Guide - Purolite

INDEXSTRONG ACID CATION EXCHANGERS 2WEAK ACID CATION EXCHANGERS 2PARTICLE SIZE DISTRIBUTION – CATION EXCHANGERS 3STRONG BASE ANION EXCHANGERS 4WEAK BASE ANION EXCHANGERS 5PARTICLE SIZE DISTRIBUTION – ANION EXCHANGERS 5SHALLOW SHELL TECHNOLOGY 6ION SELECTIVE RESINS FOR POTABLE WATER 6READY TO USE MIXED BEDS 7READY TO USE MIXED BEDS WITH INDICATOR 7NUCLEAR GRADE PRODUCTS 8NUCLEAR GRADE MIXED BEDS 8PURITY OF NUCLEAR GRADE ION EXCHANGERS 9POWDERED RESINS FOR CONDENSATE POLISHING 9POWDERED RESIN PREMIXES 9ACTIVE PHARMACEUTICAL INGREDIENTS 10EXCIPIENTS AND TABLET DISINTEGRANTS 10ULTRAPURE WATER PRODUCTS 10ULTRAPURE WATER MIXED BEDS 10HYDROMETALLURGICAL RESINS 11ADSORBENTS 12CHROMATOGRAPHIC RESINS 13CATALYST RESINS 14CHELATING RESINS 14ENZYME CARRIERS 15ANALYTICAL AND PREPARATIVE BIOCHROMATOGRAPHY 15CHROMALITE ® PRODUCT CHART 15SPECIAL ION EXCHANGERS 16SPECIAL PRODUCTS 16ABBREVIATIONS 17

STRONG ACID CATION EXCHANGERSPUROLITE ®C100C100EC120ETYPEGelPolystyrenicGelPolystyrenicGelPolystyrenicIONICFORMTOTALVOLUMECAPACITYeq/lMOISTURERETENTION%SPECIFICGRAVITYNa+ 2.0 44–48 1.29Na+ 1.9 46–50 1.27Na+ 1.5 56–60 1.22REVERSIBLESWELLING%Na ≥ H8Ca ≥ Na8Na ≥ H10Ca ≥ Na12REMARKS & APPLICATIONSPrimary softening and demineralization resin.Softening and demineralization resin, widely used inindustrial and domestic applications. Potable watergrade.Designed especially for small scale domestic softening.Potable water grade.C100X10GelPolystyrenicNa+ 2.2 40–43 1.30Na ≥ H6Excellent resistance to oxidation. Higher density cationresin offering good separation from anion resins inmixed bed applications and weak acid cation resins inlayered beds.SGC650SupergelPolystyrenicNa+ 2.2 40–43 1.30Na ≥ H8Uniform particle size used for condensate polishing andmake up MB’s. Offers excellent physical strength andhigh resistance to OSA.C150MacroporousPolystyrenicNa+ 1.8 48–53 1.25Na ≥ H4Macroporous structure offers high resistance to OSA.Employed in areas of very difficult operating conditionssuch as condensate treatment and process applications.C160MacroporousPolystyrenicNa+ 2.4 35–40 1.30Na ≥ H4Higher cross linked macroporous resin with higherexchange capacity offering excellent resistance tooxidation. For process applications, such as non-ferroushydrometallurgy and in the treatment of industrial wastestreams.NOTE: Above products also available in the H + form.WEAK ACID CATION EXCHANGERSPUROLITEC104PlusC106C107ETYPEPorousPolyacrylicMacroporousPolyacrylicMacroporousPolyacrylicIONICFORMTOTALVOLUMECAPACITYeq/lMOISTURERETENTION%SPECIFICGRAVITYH + 4.5 44–55 1.19H + 2.7 54–64 1.15H + 3.6 53–58 1.18REVERSIBLESWELLING %H ≥ Ca20H ≥ Na70H ≥ Ca15H ≥ Na50H ≥ Ca25H ≥ Na90REMARKS & APPLICATIONSHigh capacity regenerable dealkalization resin withgood exchange kinetics. Also available in food gradeas C104EPlus.Higher resistance to OSA. For process applications,such as antibiotics extraction from fermentationbroths and treatment of ammoniacal condensates.Food Grade, specifically designed dealkalization resinfor use in small cartridges for domestic applications.Not usually regenerated.C115EPorousPolymethacrylicH + 3.5 46–53 1.10H ≥ Ca40H ≥ Na100Very weakly acidic for process applications especiallyin the pharmaceutical industry. Recommended for theCARIX process.NOTE: Above products also available in the H + form.2

STRONG BASE ANION EXCHANGERSPUROLITEA400A444A600A200A300SGA550A500PlusA502PA501PA510PlusA850A860SA870TYPEType I GelPolystyrenicType I GelPolystyrenicType I GelPolystyrenicType II GelPolystyrenicType II GelPolystyrenicType ISupergelPolystyrenicType IMacroporousPolystyrenicType IMacroporousPolystyrenicType IMacroporousPolystyrenicType IIMacroporousPolystyrenicGelPolyacrylicMacroporousPolyacrylicGelDualFunctionalityPolyacrylicIONICFORMTOTALVOLUMECAPACITYeq/lMOISTURERETENTION%SPECIFICGRAVITYCl - 1.3 48–54 1.08Cl - 1.0 50–60 1.07Cl - 1.4 43–48 1.09Cl - 1.3 45–51 1.08Cl - 1.4 40–45 1.10Cl - 1.4 43–48 1.09Cl - 1.15 57–63 1.08Cl - 0.85 66–72 1.04Cl - 0.6 70–75 1.04Cl - 1.15 48–56 1.08Cl - 1.25 57–62 1.09Cl - 0.8 66–72 1.08Cl - /FB 1.25 56–62 1.08REVERSIBLESWELLING%Cl ≥ OH20Cl ≥ OH20Cl ≥ OH20Cl ≥ OH15Cl ≥ OH10Cl ≥ OH24Cl ≥ OH20Cl ≥ OH20Cl ≥ OH20Cl ≥ OH15Cl ≥ OH15Cl ≥ OH20Cl ≥ OH10REMARKS & APPLICATIONSUsed primarily in industrial water treatment in warmer climatesdue to its higher temperature stability. Offers the best silicaremoval even in co-flow regenerated plants. Also widely used inmixed beds as A400MB, PFA400MB or A400TL.Alternative high moisture gel anion resin fordemineralization and as organic scavenger on highTOC waters.Premium grade resin with high total capacity and highbreaking weight. Very low silica leakage.High capacity resin offering good silica removal, primarilyused in the production of demineralized and dealkalizedwater.Premium grade high capacity resin offering good silicaremoval. Primarily used in the production of demineralizedand dealkalized water.Uniform particle size Supergel resin with higher resistance tomechanical and osmotic shock. Recommended for condensatepolishing and make-up mixed beds, operating in conjunction withSGC650.Macroporous version of A400 offering greater resistance toOSA. Mainly used in condensate polishing or make-up mixedbeds, where its polymer structure helps in resisting organicfouling.Polystyrenic based organic scavenger resin used to reduceNOM (Natural Organic Matter) and color levels and foulingof downstream anion resins. Also supplied as A502PS forpotable water and food applications.Specifically designed for the adsorption of colloidalparticulate (silica, organic matter, metals, clays, etc.).Macroporous version of A200 offering better resistanceto OSA and organic fouling due to its polymer structure.Most widely used resin for the demineralization of highorganic bearing waters, offering the best resistance toorganic fouling. Higher operating capacity than type Ipolystyrenic resins, while still offering very good silicaleakage in co-flow and counter-flow regeneration.Acrylic based organic scavenger resin used to reduceNOM (Natural Organic Matter) color levels and fouling ofdownstream anion resins primarily for sugar decolorization.Better suited to brine-only regeneration than A500P.Bifunctional resin combining weak and strong base sites onthe same beads, offering the highest operating capacityand good resistance to organic fouling. Should not be usedwhere the feed water contains a high weak acid anionicloading (CO2 + SiO2). Recommended weak acid loading lessthan 20%.NOTE: Most of the above products are also available in the OH- form.SBA resins are temperature sensitive. This must be taken into consideration in selecting the correct product.Please consult your local Purolite office.4

WEAK BASE ANION EXCHANGERSPUROLITEA100PlusA103SPlusA109A110A111A120SA133SA830A847TYPEMacroporousPolystyrenicMacroporousPolystyrenicMacroporousPolystyrenicMacroporousPolystyrenicMacroporousPolystyrenicMacroporousPolystyrenicMacroporousPolystyrenicMacroporousPolystyrenicGelPolyacrylicIONICFORMFreeBaseFreeBaseFreeBaseFreeBaseFreeBaseFreeBaseFreeBaseFreeBaseFreeBaseTOTALVOLUMECAPACITYeq/lMOISTURERETENTION%SPECIFICGRAVITY1.3 53–62 1.041.5 51–58 1.041.0 58–65 1.052.0 60–66 1.051.7 56–62 1.021.2 58–63 1.041.8 46–51 1.042.75 50–56 1.101.6 56–62 1.08MAXIMUMSWELLING %Free Base ≥ Cl25Free Base ≥ Cl25Free Base ≥ Cl25Free Base ≥ Cl50Free Base ≥ Cl40Free Base ≥ Cl25Free Base ≥ Cl25Free Base ≥ Cl20Free Base ≥ Cl25REMARKS & APPLICATIONSMost widely used WBA in IWT due to its good resistanceto organic fouling and high operating capacity. Also usedin the food industry as A100SPlus.Higher capacity resin more commonly employed for thedemineralization and decolorization of glucose syrupsand other organic solutions.Special WBA resin with primary amine functional groups.Excellent chemical and thermal stability. High resistanceto osmotic shocks.Special WBA resin with primary amine groups. HighcapacityHigh moisture, high capacity WBA resin without anyquaternary ion exchange groups. Can offer significantadvantages for high organic bearing waters andsweeteners solutions.Demineralization and decolorization of sweetenerssolutions. Also used for color bodies removal fromwaste waters.High capacity WBA resin for demineralization anddecolorization of glucose solutions.Very high exchange capacity polyamine resin developedfor special applications such as desulphatation ofseawater.First choice acrylic WBA resin for IWT offering highercapacity than polystyrenic resins and good rinsecharacteristics. Good reversible removal of organicsdue to more hydrophilic acrylic polymer.PARTICLE SIZE DISTRIBUTION – ANION EXCHANGERSPUROLITEGRADENOMINALPARTICLESIZE µmMAX % BELOWLOWER LIMITUNIFORMITYCOEFFICIENTREMARKS & APPLICATIONSSTD 300–1200 1% < 300 < 1.7 Standard grade.MB 300–1200 1% < 300 < 1.7 Mixed Bed grade.TL Gel 425–850 1% < 425 < 1.35TL Macroporous 425–850 1% < 425 < 1.35Higher purity Mixed Bed grade which can be used with intermediateinert spacer in 3-component Mixed Bed systems (Trilite).DL Strong 630–1200 5% < 630 < 1.4 Layered Beds, Lower Layer.DL Weak 300 - 650 3% < 300 < 1.4 Layered Beds, Upper Layer.S/C 425 - 1200 2% < 425 < 1.6High specific flow rate IWT and special process applications.(Treatment of sugar solutions, etc.)PUROLITEGRADEMEANDIAMETERµmUNIFORMITYCOEFFICIENTPUROFINE ® 570 ± 50 1.1 – 1.2REMARKS & APPLICATIONSHigh efficiency grade with excellent kinetics and rinse properties. Also employed as mixed bedanion component with PFC and PPC grade cation resins.PUROPACK ® Gel 650 ± 50 1.1 – 1.2 High efficiency grade particularly suited to counter flow regenerated packed bed systems.PUROPACK ®Macroporousand Acrylics750 ± 100 1.2 – 1.4 High efficiency grade particularly suited to counter flow regenerated packed bed systems.NOTE: Most resins presented in this catalog can be supplied as Purofine ® and Puropack ® grades (specific literature available).5

READY TO USE MIXED BEDSPUROLITEIONICFORMCOMPONENTDESCRIPTIONMB400 H + / OH - 40%–StrongAcid Cation Gel60%–StrongBase Anion GelType IMB3720 H + / OH - 40%–StrongAcid Cation Gel60%–StrongBase Anion GelType IMB46LT H + / OH - 50%–StrongAcid Cation Gel50%–StrongBase Anion GelType IMB478LT H + / OH - 50%–StrongAcid Cation Gel50%–StrongBase Anion GelType ITOTALWORKINGCAPACITYeq/l.60.60.70REMARKS & APPLICATIONSFor the production of high-purity, silica-free demineralized water. Principal use in polishingunits after small IEX or RO plants. Also used in direct treatment of raw waters.High operating capacity, achieving conductivities less than 0.1 μS/cm in many polishingapplications. MB400 is the most popular ready to use industrial grade mixed bed.This product is the highest quality industrial grade mixed bed offering enhancedperformance between that associated with industrial and UPW grades.High capacity mixed bed, specific for the EDM market (spark erosion machining).Also used for direct treatment of raw waters with high alkalinity..60 Primarily used for EDM applications.NOTE: Working capacities to full exhaustion, typical for the first column in a lead-lag layout and dependent on influent water quality and end point.Many other special customized Mixed Beds are produced with and without indicators – consult your local Purolite sales office.READY TO USE MIXED BEDS WITH INDICATORPUROLITEIONICFORMCOLOR CHANGEON EXHAUSTIONMB400IND H + / OH - Blue (regenerated)Amber (exhausted)Indicator on anioncomponentMB600AE H + / OH - Greenish Blue(regenerated)Reddish Amber(exhausted)Indicator on anioncomponentGreen (regenerated)Blue (exhausted)MB500VC H + / OH -Indicator on cationcomponentGreen (regenerated)Blue (exhausted)MB59VC H + / OH -Indicator on cationcomponentCOMPONENTDESCRIPTION40%–Strong AcidCation Gel60%–Strong BaseAnion GelType I40%–Strong AcidCation Gel60%–Strong BaseAnion GelType I40%–Strong AcidCation Gel60%–Strong BaseAnion GelType I60%–Strong AcidCation Gel40%–Strong BaseAnion GelType ITOTALWORKINGCAPACITYeq/l0.600.660.541.1REMARKS & APPLICATIONSFor the production of high-purity, silica-free demineralizedwater. Principal use in polishing units after small IEX or ROplants. Also used in direct treatment of raw waters. Highoperating capacity, achieving conductivities less than 0.1 μS/cmin many polishing applications.High performance mixed bed with special particle size and brightcolor change thanks to the unique indicator used.Product successfully used in the production of cartridges forsteam irons.High contrast color change mixed bed with a UV stable indicatorfor the production of high quality demineralized water. Can beused in polishing units as well as for the direct treatment of rawwaters. Product successfully used in the production of cartridgesfor steam irons.Very high capacity mixed bed employing a WBA component for theproduction of partially demineralized water, where removal of CO2and SiO2 is not required. Typical run end point of 30 - 50 μS/cm.NOTE: Working capacities to full exhaustion, typical for the first column in a lead-lag layout and dependent on influent water quality and end point.Many other special customized Mixed Beds are produced with and without indicators – consult your local Purolite sales office.7

NUCLEAR GRADE PRODUCTSPUROLITETYPEIONICFORMTOTALCAPACITYeq/kgMOISTURERETENTION%REMARKS & APPLICATIONSNRW1000GelStrong AcidCationH+ 1.8 51–55Make up demineralization and radwaste systems.This cation resin is not normally used in Li or 7 Li forms as a stand-alone resin.NRW1100GelStrong AcidCationH+ 2.0 46–50Used in separate bed cation vessels for polishing or layered on mixed bedresins for added cation capacity. Also available in 7 Li, Li and NH 4forms.Higher capacity version of NRW1000.NRW1160GelStrong AcidCationH+ 2.5 36–41Primary purification cation beds for delithiation and outage clean up.Polishing steam generator blow down and layering on polishing mixed beds.Also available in 7 Li form.NRW160MacroporousStrong AcidCationH+ 2.1 43–48Polishing steam generator blow down and layering on polishing mixed beds.Primary purification cation beds for delithiation and outage clean up.Selective for 137 Cs. Also available in 7 Li form.NRW4000GelStrong AcidCationOH - 1.048–54(Cl - form)Separate bed demineralizer anion radwaste systems. Type 1, nuclear grade versionof A400, offering good silica removal and removal of weak and strong acids.NRW6000GelStrong AcidCationOH - 1.143–48(Cl - form)Primary and secondary separate bed demineralizer anion. Also used as underlayin condensate polishing. Higher total capacity version of NRW4000.NRW7000GelStrong AcidCationOH - 1.1542–47(Cl - form)Primary and secondary separate bed demineralizer anion.Also used as underlay in condensate polishing.NRW5010MacroporousStrong AcidCationOH - 0.470–75(Cl - form)Special nuclear grade colloid removal resin for single beds or surface layer on mixedbeds to achieve ultra-polishing of primary coolant and radwaste.NRW5070MacroporousStrong AcidCationOH - 1.050–55(Cl - form)Special nuclear grade colloid removal resin with mechanical durability forsingle beds or surface layer on mixed beds to achieve ultra-polishing of primarycoolant and radwaste.NRW5050MacroporousStrong AcidCationOH - 0.953–58(Cl - form)Porous structure designed to give greater resistance to surface fouling in awide range of nuclear applications.NUCLEAR GRADE MIXED BEDSPUROLITEIONICFORMNRW3240 H + / OH -(1)(2)NRW3460 H + / OH -(1)(2)NRW3560 H + / OH -(1)COMPONENTSGel CationGel AnionGel CationGel AnionMacroporous CationGel AnionNRW3670 H + / OH - Gel CationGel AnionTOTALVOLUMECAPACITYeq/lREMARKS & APPLICATIONS1.8/1.0 Primary polishing, clean up systems, and radwaste.2.0/1.12.1/1.12.5/1.15(1) Cation component available in 7 Li form (2) Cation component available in Li formHigher total capacity version of NRW3240 for primary polishing,clean up systems and radwaste.Mixed Bed with very high capacity and porous cation for primary purification,steam generator blow down and spent fuel pool demineralization.Primary polishing, condensate polishing, spent fuel pool demineralizer,steam generator blow down demineralizer and reactor water cleanup.8

PURITY OF NUCLEAR GRADE ION EXCHANGERSCATION RESINSANION GEL RESINSIONIC FORM CONVERSION IONIC FORM CONVERSIONH+ 99.9% min. OH - 95% min.Li+ or 7 Li+ 99.9% min. CO 32-5% max.*Cl -**SO 42-0.1% max.0.1% max.IMPURITIES mg/kg dry IMPURITIES mg/kg drySodium 40 max. Sodium 20 max.Iron 50 max. Iron 50 max.Heavy Metalsas Lead40 max.Heavy Metals asLead30 max.*0.2% max for NRW5070**0.3% max. for NRW5010.0.2% max for NRW5070NOTES:A. Nuclear grade mixed beds are normally supplied with near stoichiometricequivalents of anion and cation resin sites. Other ratios can be supplied onrequest.B. Purolite Nuclear Grade Products are in operation within the defense industryor nuclear power stations in the Americas, Europe and Asia and carry formalapprovals from leading operators of nuclear installations. They meetinternationally recognized specifications from the leading suppliers ofnuclear power station designs.POWDERED RESINS FOR CONDENSATE POLISHINGMICROLITE ®TYPEFUNCTIONALGROUPIONICFORMTOTALCAPACITYeq/kgMOISTURERETENTION%STANDARDPACKAGINGDRY WEIGHTkgREMARKS & APPLICATIONSPrCH Cation Sulfonic H + 4.8 45–62 8.8 100% Powdered Cation Hydrogen Form.PrCN Cation Sulfonic NH4+4.8 40–60 10.2 100% Powdered Cation Ammonia Form.PrAOHFC+AnionCelluloseFiberQuaternaryAmmoniumOH - 4.0 50–60 5.7 100% Powdered Anion Hydroxide Form.Inert Neutral — 55–75 5.5 100% Specialty Cellulose Fiber.POWDERED RESIN PREMIXESMICROLITE ®CG12HCG19HCG4HMB1/1HTYPECation/Anion/ FiberCation/Anion/ FiberCation/Anion/ FiberCation/AnionFUNCTIONALGROUPSulfonic/QuaternaryAmmoniumSulfonic/QuaternaryAmmoniumSulfonic/QuaternaryAmmoniumSulfonic/QuaternaryAmmoniumIONICFORMTOTALCAPACITYeq/kgRATIOCATION TOANIONdry wt.RATIOFIBER TORESINSTANDARDPACKAGINGDRY WEIGHTkgH + / OH - 4.8 / 4.0 4 : 5 1 : 2 5.5H + / OH - 4.8 / 4.0 4 : 5 1 : 9 5.5H + / OH - 4.8 / 4.0 1 : 1 1 : 1 5.5H + / OH - 4.8 / 4.0 1 : 1 — 5.5NOTE: Other custom made resin/fiber premixed combinations available upon request.REMARKS & APPLICATIONSResin/Fiber blend. Also available inammonium / hydroxide form.Resin/Fiber blend. Also available inammonium / hydroxide form.Resin/Fiber blend. Also available inammonium / hydroxide form.Resin only. Also available in ammonium /hydroxide form.9

PHARMACEUTICAL PRODUCTSACTIVE PHARMACEUTICAL INGREDIENTSPUROLITE TYPE REMARKS & APPLICATIONSC100NaMRC100CaMRA430MRA830EMRSodium PolystyreneSulfonateCalcium PolystyreneSulfonateCholestyraminePolyamineNOTE: The manufacturing site is approved by the FDA and is cGMP certified.Strong acid cation resin with sulfonic acid groups in sodium form; purified, ground and driedfor the treatment of hyperkalemia. Can also be used as a drug carrier for controlled release.Strong acid cation resin with sulfonic acid groups in the calcium form;purified, ground and dried for the treatment of hyperkalemia.Special strong base anion resin; purified chloride form,ground and dried for treatment of high cholesterol.Weak base anion resin in free base form; purified, ground,dried and used as antacid to control gastric acidity.EXCIPIENTS AND TABLET DISINTEGRANTSPUROLITE TYPE REMARKS & APPLICATIONSC100HMRC108DRC115HMRC115KMRPolystyrene Sulfonic AcidPolyacrylic AcidPolacrilexPolacrilin PotassiumStrong acid cation resin with sulfonic acid groups in hydrogen form;purified, ground, dried and used as a drug carrier for controlled release.Special weak acid cation resin in hydrogen form; provided as very fine,dry beads and used as a drug carrier for controlled release or as taste masking.Weak acid cation resin in hydrogen form; purified, ground, dried andused as a drug carrier or as pH adjuster in the formulation of tablets.Weak acid cation resin in potassium form;purified, ground, dried and used as a tablet disintegrant.NOTE: Consult your local Purolite office for confirmation of regional, country or state regulatory compliance.ULTRAPURE WATER PRODUCTSULTRACLEANUCW9126UCW5072UCW1080TYPEGel StrongAcid CationGel StrongAcid CationMacroporousComplex AmineIONICFORMTOTALVOLUMECAPACITY(eq/l)MOISTURERETENTION%SPECIFICGRAVITYMOIST BEADSH + 1.9 49–54 1.21OH - 1.0 55–60 1.07FreeBase0.6(FB form)61–67(Cl - form)1.10REMARKS & APPLICATIONSUltrapure Water Cation Resin with very low TOC release operatingin single beds or mixed beds with anion component UCW5072.Ultrapure Water Anion Resin with very low TOC release operatingin single beds or mixed beds with cation component UCW9126.Semiconductor Industry - Ultrapure Water forSelective Boron Removal.ULTRAPURE WATER MIXED BEDSULTRACLEANIONICFORMTOTALWORKINGCAPACITY eq/lMOISTURERENTENTION%REMARKS & APPLICATIONSUCW9964 H + / OH - Cation: 1.9Anion: 1.0UCW9966 H + / OH - Cation: 1.9Anion: 1.0UCW3600 H + / OH - Cation: 1.9Anion: 1.1UCW3700 H + / OH - Cation: 1.9Anion: 1.0UCW3700 H + / OH - Cation: 2.0Anion: 1.0NOTE: The ratio of Cation to Anion is chemically equivalent at 1:1.Cation: 49 - 54%Anion: 55 - 60%(Cl- form)Cation: 49 - 54%Anion: 55 - 60%(Cl- form)Cation: 49 - 54%Anion: 55 - 62%Cation: 46 - 50%Anion: 60 - 70%Cation: 49 - 54%Anion: 60 - 70%Highest purity separable MB for final polishing and point of use treatmentfor UPW systems. Highest resistivity and very low TOC release.Highest purity non separable MB for final polishing and point of usetreatment for UPW systems. Highest resistivity and very low TOC release.High operating capacity separable Mixed Bed for UPW systems.Separable Mixed Bed for UPW systems.Separable Mixed Bed with higher capacity cation for UPW systems.10

HYDROMETALLURGICAL RESINSPUROLITEA100/2412S992A500CPlusPFA600/4740A660/4759PFA460/4783A500U/2788A500U/4994A560/4790A100MoS930PlusS930/4888S950S960A170/4675A172/4635S984S957TYPEMacroporousMixed BaseAnionMacroporousWeak Base /ChelatingMacroporousStrong BaseAnionGelStrong BaseAnionGelStrong AcidCationGelStrong AcidCationMacroporousStrong BaseAnionMacroporousStrong AcidCationMacroporousStrong AcidCationMacroporousMixed BaseAnionMacroporousChelatingMacroporousChelatingMacroporousChelatingMacroporousChelatingMacroporousWeak BaseAnionGelWeak BaseAnionMacroporousWeak Base /ChelatingMacroporousStrong AcidCation /ChelatingFUNCTIONALGROUPMixedTertiary &QuaternaryAminesMixedAminesQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumMixedTertiary &QuaternaryAminesMOISTUREIONICFORM CAPACITY RETENTION%Cl - 3.8 eq/kg 46–56FB 4.4 eq/kg 47–55Cl - 1.15 eq/l 57–63Cl - 1.6 eq/l 40–45Cl - 1.3 eq/l 44–52Cl - 1.3 eq/l 47–54Cl - 1.15 eq/l 53–58Cl - 1.15 eq/l 53–58Cl - 1.15 eq/l 49–56REMARKS & APPLICATIONSFor effective recovery of aurocyanide complexes obtained fromthe alkaline cyanide processing of gold ores. Suitable for RIPprocess. 800-1300 µm grading.For effective recovery of aurocyanide complexes obtained fromthe alkaline cyanide processing of gold ores. Suitable for RIPprocess. 800-1300 µm grading.For effective recovery of gold complexes obtained from thethiosulfate processing of gold ores.For the extraction of uranyl sulfate and carbonatecomplexes from the leachates originated from ISL, batchor heap leaching processes.For the extraction of uranyl sulfate complexes from the sulfuricleachates. Suitable for RIP process. 800-1300 µm grading.For the extraction of uranyl sulfate complexes from theclean sulfuric solutions.For uranium recovery. Suitable for RIP process.800-1300 µm grading.For uranium recovery. Suitable for RIP process.710-1300 µm grading.For uranium recovery from the sulfuric solutions. Suitablefor RIP process. 800-1300 µm grading.Cl - 1.2 eq/l 48–56 For molybdenum recovery from acid solutions.Iminodiacetic Na + 50 g/l Cu 52–60 For base metals recovery from weak acid solutions.Iminodiacetic Na + 50 g/l Cu 52–60AminophosphonicBispicolylamineComplexAmineComplexAmineMixedprimary,secondaryand tertiaryaminesMixedSulfonic andPhosphonic*Some products can be supplied in customized ionic form.For base metals recovery from weak acid solutions. Suitablefor RIP process. 800-1300 µm grading.Na + 26 g/l Ca 60–68 For recovery of uranium from phosphoric acid.SO 42-25 g/l Ca 50–60FBFB1.3 eq/l1.2 eq/l42–47(Cl)25–45(Cl)For sorption of base metals from more concentrated sulfuricsolutions and separation of base metals.For selective sorption of rhenium from acid streams.Suitable for RIP process. 600-1200 µm grading.For separation of rhenium from molybdate.FB 2.7 eq/l 50–56 For tungsten impurity removal from molybdate solutions.Na + 18 g/l Fe 55–70For removal of ferric iron from copper, nickel orcobalt electrolytes as well as molybdenum sorption fromstrong acid solutions.11

ADSORBENTSPUROSORBPOLYMERMATRIXPOREDIAMETERÅ*POREVOLUMEml/g*SURFACEAREAm2/dry g**MOISTURERETENTION%PAD350 Polystyrenic 350 0.7 700 58–64PAD400 Polystyrenic 400 0.7 720 55–61PAD428 Polystyrenic 450 0.7 500 50–56PAD500 Polystyrenic 620 1.0 700 63–69REMARKS & APPLICATIONSSpecifically designed for selective adsorption of molecules with arelatively low molecular weight, these adsorbents offer consistentenhanced performance over carbon and other adsorbents. Thevariations in surface area and pore volume give each product uniqueadvantages in applications such as the removal of hydrocarbons andchlorinated solvents from ground waters and industrial wastestreams.Brominated, styrenic adsorbent with high hydrophobicity. Removalof hydrophobic organic compounds from aqueous solutions andpolar solvents.This unique product, characterized by medium size pores and anarrow particle size distribution, offers definitive advantages overstandard grade adsorbents. Its uniform beads ensure lowerpressure drop in service duty and enhanced elution profiles of theadsorbed species on desorption. Typical applications include theextraction and separation of antocyans and polyphenols fromgrape must and other fruit juices.PAD550PAD600PolystyrenicPolystyrenic6006301.11.195083058–6458–64These three products differ in offering a range of surface areas,pore volumes and pore sizes specifically tailored for applicationswhere medium to large molecular weight species are targetedPAD700 Polystyrenic 700 1.2 550 56–62within the application. Typical applications include the isolationand purification of Active Pharmaceutical Ingredients.PAD900 Polystyrenic 1000 1.5 800 67–73PAD910 Polystyrenic 1100 1.6 540 62–68PAD300 Polyacrylic 280 0.5 90 59–65PAD610 Polyacrylic 700 1.1 490 60–66PAD950 Polyacrylic 960 1.3 535 65–71These products offer the largest pore sizes. They are designed tocapture the largest molecular weight speciesin a wide range of applications such as the extraction of antibioticsfrom fermentation broths or bitterness removal from citrus juices.The acrylic matrix gives these products different chemicalproperties. Their less hydrophobic structure enables them tooutperform polystyrene based synthetic adsorbents in non-polarmedia but does not mean they cannot be used in aqueous solutions.They have differing surface areas, pore volumes and poresizes to cover a wide range of applications. The changes in theseparameters alter the selectivity of each product.HYPERSOL-MACRONET ®MN100MN102TYPEWeak BaseAnionWeak BaseAnionVOLUMECAPACITYeq/l0.1 - 0.3(FB form)0.1 - 0.3(FB form)POREDIAMETERÅ*SURFACEAREAm 2 /dry g**900 900750 700MOISTURERETENTION%57–61(Cl - form)50–60(FB form)MN200 Inert — 900 900 57–61MN202 Inert — 750 825 50–60MN270 Inert — 25 1200 35–50MN500MN502Strong AcidCationStrong AcidCation0.8 - 1.0(Na + form)0.8 - 1.0(Na + form)900 900750 70052–57(H + form)52–57(H + form)REMARKS & APPLICATIONSFor the efficient sorption of high molecular weight color bodiessuch as those found in sugar solutions and many complexorganics such as dyestuffs or certain pesticides.For the efficient sorption of high molecular weight organicmolecules such as limonin and narangin from fruit juices.Regenerated more easily than other materials due to its weakbase functionality.For the efficient sorption of high molecular weight organicmolecules with lipophilic properties (dyestuffs, pesticides)in industrial process waste water treatment.For the efficient sorption of high molecular weight organicmolecules with lipophilic properties as are typically foundin waste waters from industrial processes. These includecomplex organics such as dyestuffs or pesticides.Sorption / Separation of hydrophobic organic species -Microporous matrix. Pore Volume 0.2 – 0.4 ml/g.Sorption / Separation of hydrophobic organic speciesSorption / Separation of hydrophobic organic species*Hg intrusion method**One point BET12

CHROMATOGRAPHIC RESINSPUROLITEPCR145PCR450PCR631PCR632PCR633PCR642PCR651PCR652PCR732PCR833TYPEMacroporousStrong AcidCationGelStrong AcidCationGelStrong AcidCationGelStrong AcidCationGelStrong AcidCationGelStrong AcidCationGelStrong AcidCationGelStrong AcidCationGelStrong AcidCationGelStrong AcidCationTOTAL VOLUMECAPACITYeq/l (Na form)MEAN SIZETYPICALµmMOISTURERETENTION%(Na Form)MOISTURERETENTION%(H Form)1.5 270–310 55 - 60 60–661.35 360–400 60 - 65 65–711.6 210–240 50 - 56 55–621.7 210–250 52 - 55 55–611.6 210–240 50 - 56 55–621.6 295–235 52 - 56 57–611.6 330–360 52 - 56 57–611.6 350–370 52 - 56 57–611.8 210–250 50 - 52 53–572.0 225–275 44 - 48 51–55REMARKS & APPLICATIONSCation chromatographic separation resinscan be supplied in Ca 2+ , Na + , K + or H + forms.Ca 2+ form separations:Glucose-Fructose, MaltoseNa + form separations:Beet Molasses, Dextrose enrichment, ErythritolK + form separations:Beet Molasses, Fructo-oligosaccharides, Soluble fiberH + form separations:Acid-Sugar (cellulose hydrolyzate)PUROLITETYPETOTAL VOLUMECAPACITY(eq/l) (Cl form)MEAN SIZETYPICALµmMOISTURE RETENTION %REMARKS & APPLICATIONSPCA433GelStrong BaseAnion1.3 230–280 48–57Anion chromatographic separation resincan be supplied in Cl - , SO 42-, OH - forms.PCA433/5180GelStrong BaseAnion1.4 230–280 40–45Anion chromatographic separation resin.Acid retardation. Better oxidation stability.WCA100GelStrong AcidCation0.9amphoteric240–280 52–62Amphoteric resin containing balance of weaklyacidic and strongly basic groups.Chromatographic applications like salt removalfrom caustic and sulfate removal from brine.13

CATALYST RESINSPUROLITETYPEFUNCTIONALGROUPMOISTUREIONICFORM CAPACITY RETENTION%CT122 Gel Sulfonic H + 5.0 78–82CT124 Gel Sulfonic H + 5.0 65–70CT151 Macroporous Sulfonic H + 5.1 54–59REMARKS & APPLICATIONSRecommended for esterification reactions and for the synthesis ofBisphenol A.Recommended for esterification reactions and for the synthesis ofBisphenol A.Specifically designed for catalysis of organic reactions, in particularfor the purification of phenol.CT169 Macroporous Sulfonic H + 4.7 51–57 MTBE, ETBE, TAME, TAEE, Esterification, C4 dimerization.CT175 Macroporous Sulfonic H + 4.9 53–58Excellent accessibility of active sites. Studied and developed for thesynthesis of MTBE, ETBE and TAME.CT251 Macroporous Sulfonic H + 5.2 54–59 Primarily used for phenol purification, esterification, C4 dimerization.CT252 Macroporous Sulfonic H + 5.4 54–58CT269 Macroporous Sulfonic H + 5.2 51–57CT275 Macroporous Sulfonic H + 5.2 54–59Primarily used for esterification, aromatic alkylation, phenol purifiction,and C4 dimerization. Highest dry weight capacity.High activity with very good mechanical resistance.Ideal for esterification reactions and phenol alkylation.High activity catalyst with excellent accessibility of active sites.Recommended for the synthesis of MTBE, ETBE, TAME and TAEE.CT276 Macroporous Sulfonic H + 5.3 51–59 For MTBE, ETBE, TAME, and C4 dimerization. High dry weight capacity.CT248 Macroporous Sulfonic H + 2.7 48–58NOTE: Most products are also available in DR (Dry) grade.High temperature catalysis.Hydration of olefins in MEK process, hydrogenation of MIBK.CHELATING RESINSPUROLITES108S910FUNCTIONALGROUPN-methylglucamineAmidoximeMOISTUREIONICFORM CAPACITY RETENTION%FreeBaseFreeBase0.6 eq/l61 - 67(Cl - )40 g/l Cu 52–56S914 Thiourea — 1.0 eq/l 50–56S920 Isothiouronium H + 200 g/l Hg 48–54S924 Thiol H + 200 g/l Hg 45–51S930Plus Iminodiacetic Na + 50 g/l Cu 52–60S940S950S957AminophosphonicAminophosphonicPhosphonic/SulfonicNa + 20 g/l Ca 55–65Na + 26 g/l Ca 60–68H + 18 g/l Fe 55–70S960 Bis-picolylamine SO 42-25 g/l Ni 50–60S985PolyamineFreeBase2.3 eq/l 52–57REMARKS & APPLICATIONSSelective removal of boron from potable water and water used in agriculture/horticulture irrigation. Also for use in waste water and process water applications.Selective removal of heavy metals from wastewater andhydrometallurgical processes.High selectivity and high capacity for mercury removal from brine and effluent fromchlor-alkali process. Selective recovery of precious metals (gold, platinum, palladium,etc.) from acidic solutions. Stable over entire pH range. Non-regenerable use.High selectivity and high capacity for mercury removal in wastewaters. Widely usedfor final polishing to meet mercury discharge limits. Selective recovery of preciousmetals (gold, platinum, palladium, etc) from acidic solutions. Non-regenerable use.Regenerable resin designed for the selective removal of mercury fromwastewaters and special applications (i.e. chlor-alkali plants).Improved version of S930 widely used as a general metals polisher from a widevariety of wastes. Purification of brine in chlor-alkali plants offering highlyefficient removal of strontium. Extremely high copper capacity. Countlessapplications in non-ferrous hydro - metallurgy.Highly selective for low atomic weight metals. Also used in purification of brinewhere lower strontium levels are encountered in chlor-alkali plants.Selective removal of heavy metals from wastewaters. Purification of selectedplating baths in the surface finishing industry. (i.e. Bright Nickel bath rejuvenation)Resin for removing trace iron from drinking water. Applications in thepurification of galvanic baths including removal of iron in low pH applications.Purification of selected plating baths in the surface finishing industry.For sorption of base metals from more concentrated sulfuric solutionsand separation of base metals.Removal of heavy metals present in complexed form(e.g. EDTA complexes) from wastewaters.14

ENZYME CARRIERSPUROLITETYPEFUNCTIONALGROUPIMMOBILIZATIONPOROSITY(ø, Å)REMARKS & APPLICATIONSECR8205 Epoxy acrylate Epoxy Covalent 450–600 Aqueous/Non aqueous mediaECR8214 Epoxy acrylate Epoxy Covalent 1200–1800 Aqueous/Non aqueous mediaECR4204 Epoxy acrylic/styrene Epoxy Covalent 275–450 Aqueous/Non aqueous mediaECR8310ECR8319ECR8405ECR8417Amino C2 acrylateAmino C2 acrylateAmino C6 acrylateAmino C6 acrylateAmino Group(short spacer)Amino Group(short spacer)Amino Group(long spacer)Amino Group(long spacer)Covalent 850–1200 Aqueous/Non aqueous mediaCovalent 1600–2000 Aqueous/Non aqueous mediaCovalent 450–850 Aqueous/Non aqueous mediaCovalent 1600–2200 Aqueous/Non aqueous mediaECR8804 Octadecyl acrylate Octadecyl Adsorption 350–450 Non aqueous mediaECR8806 Octadecyl acrylate Octadecyl Adsorption 500–700 Non aqueous mediaECR1030 DVB/acrylate None Adsorption 200–300 Non aqueous mediaECR1090 Macroporous styrene None Adsorption 900–1100 Non aqueous mediaECR1091 Macroporous styrene None Adsorption 950–1200 Non aqueous mediaNOTE: Samples are typically provided in standard or customized “kits” (50g or 500g each product). Available as 150 – 300 micron (F grade) or 300 – 700 micron (M grade)Resins are supplied wet. All resins are food grade.ANALYTICAL AND PREPARATIVE BIOCHROMATOGRAPHYSIZE RANGE3, 4, 5 µm Analytical (HPLC)10, 15 µm Preparative (HPLC)15, 35, 50, 75 µmAPPLICATIONSProcess/polishing of proteins, small molecules and synthetic biomolecules,recombinant proteins, front-end capture, desalting, purification, solid phase extraction>75 µm Large scale purification, desalting, polishing of proteins and synthetic biomoleculesCHROMALITE ® PRODUCT CHARTTYPEPARTICLE SIZE

SPECIAL PRODUCTSPUROLITEAC20AC20GTYPEGranular ActivatedCarbonGranular ActivatedCarbonSHIPPING WEIGHTg/lPARTICLE SIZE ORDIMENSION mm470–490 0.4–1.4470–490 0.6–2.4REMARKS & APPLICATIONSFor the removal of free chlorine &organic contaminants from potable water.Coarse version of AC20 for the removal of free chlorine &organic contaminants from potable water.IP1 Polyethylene 540–560 2.5–4.0 Floating inert polymer for Puropack ® systems with downflow service.IP3 Polyacrylate 680–710 Mean 0.67–0.73 Inert spacer for use in gel Trilite 3-component mixed beds.IP4 Polypropylene 520–550 1.1–1.5IP7 Polyacrylate 680–710 Mean 0.67–0.73Floating inert polymer in the form of small cylinders for Puropack ®systems with upflow service.Blue colored inert spacer for use in macroporous high performanceTrilite 3-component mixed beds.IP9 HDPVC 800–900 3–5 Heavy inert polymer for use as an underbed - cylindrical form.MZ10Plus Manganese Zeolite 1300–1400 0.25–1.0CPM 7040APM 7540Cation PermselectiveMembraneAnion PermselectiveMembrane380–420 g/m2 1000 x 3000380–420 g/m2 1000 x 3000Activated greensand for removal of iron, manganese and hydrogensulfide from ground water. Potable water treatment and pre-treatmentfor ion exchange resins plants.Heterogeneous membrane, permeable to cations;for electrodialysis and anaphoresis.Heterogeneous membrane, permeable to anions;for electrodialysis and cataphoresis.SPECIAL ION EXCHANGERSPUROLITEMPR1000C100EAgC150AgA605HM6 / HM10NRW100QRC100EVCHA200MBOHINDA400MBOHINDCT275AgPD206OL100TYPEMacroporousStrong BaseAnionsGel Strong AcidCationMacroporousStrong Acid CationGel IodinatedStrong Base AnionHydroponic ResinGel Strong AcidCationGel Strong AcidCationGel Strong BaseAnionType IIGel Strong BaseAnion Type IMacroporousStrong Acid CationGelStrong Acid CationGel Strong AcidCationFUNCTIONALGROUPQuaternaryAmmoniumIONICFORMTOTALCAPACITYeq/lMOISTURERETENTION%Cl - 0.6 68–74Sulfonic Na+ 1.9 46–50Sulfonic Na+/Ag+ 1.8 48–53QuaternaryAmmoniumSulfonic /Tertiary AmineCl-/I- — —H+/FB/Nutrients— —Sulfonic H+ 1.9 (Na) 53–57 (H)Sulfonic H+ 1.9 (Na) 53–57 (H)QuaternaryAmmoniumQuaternaryAmmoniumOH- 1.3 (Cl) 45–51 (Cl)OH- 1.3 (Cl) 48–54 (Cl)Sulfonic H+/Ag+ 5.2 51–59Sulfonic H+ 4.9 eq/kg —Sulfonic Na+ 1.9 44–48REMARKS & APPLICATIONSProprietary resin blend for reducing membrane fouling byremoving colloidal materials and dissolved organic matterfrom RO feedwater. Significant SDI reduction.Softening resin with bacteriostatic properties containinga small proportion of special silver loaded resin.Silver loaded resin used as bacteriostaticadditive for softening resins.Lodine release anion resin for disinfecting potable water at pointof use. For remote locations and treatment of contaminated water.Two products for nutrient release for healthy growthand development of ornamental plants in hydroculture.Cation resin with indicator. On exhaustion, color changesfrom neutral (regenerated form) to red (exhausted form).Widely used for after-cation conductivity measurementfor monitoring condensate quality on power stations.Cation resin with indicator. On exhaustion color changesfrom green (regenerated form) to blue (exhausted form).High capacity Type 2 anion resin with indicator. Uponexhaustion color changes from blue (regenerated form)to neutral form (exhausted form). Used in HCl vent scrubbersand demineralization tank vents to stop CO2 ingress.Type 1 version of A200MBOHIND. Also available asmacroporous product as A500MBOHIND. Anion resinwith indicator. Upon exhaustion color changes from blue(regenerated form) to neutral form (exhausted form).Silver loaded resin for the removal of alkyl iodides (C1 to C12or higher) in organic solvents such as acetic acid, under lowtemperature conditions (

ABBREVIATIONSCIX-ROEDMEDTAEPHDPVCIEXIWTMBMPNOMOSAPFAPPAPFCPPCRIPROSACSBASSTTDSTOCUPWUSPUVWACWBACyclic Ion Exchange – Reverse OsmosisElectrical Discharge MachiningEthylenediaminetetraacetic acidEuropean PharmacopoeiaHigh Density PolyVinylChlorideIon ExchangeIndustrial Water TreatmentMixed BedMacroporousNatural Organic MatterOsmotic Shock and AttritionPurofine ® AnionPuropack ® AnionPurofine ® CationPuropack ® CationResin in PulpReverse OsmosisStrong Acid CationStrong Base AnionShallow Shell TechnologyTotal Dissolved SolidsTotal Organic CarbonUltrapure WaterUS PharmacopoeiaUltra-violetWeak Acid CationWeak Base Anion17

Americas150 Monument RoadBala Cynwyd, PA19004T +01 800.343.1500T +01 610.668.9090F +01 484.384.2751Americas@purolite.comEuropeLlantrisant Business ParkLlantrisantWales, UKCF72 8LFT +44 1443 229334F +44 1443 227073Europe@purolite.comAsia PacificRoom 707, C SectionHuanglong Century PlazaNo.3 Hangda RoadHangzhou, Zhejiang, China 310007T +86 571 876 31382F +86 571 876 31385AsiaPacific@purolite.comAustraliaBrazilCanadaChinaCzech RepublicFranceGermanyIndiaIndonesiaItalyJapanJordanKazakhstanKoreaMalaysiaMexicoPolandRomaniaRussiaSingaporeSlovak RepublicSouth AfricaSpainTaiwanUKUkraineUSAUzbekistanFor further information onPurolite ® products & servicesvisit www.purolite.com©2013 Purolite.All rights reserved.