PRODUCT INFORMATION Product Summary Guide - Purolite

More documents

Recommendations

Info

PHARMACEUTICAL PRODUCTSACTIVE PHARMACEUTICAL INGREDIENTSPUROLITE TYPE REMARKS & APPLICATIONSC100NaMRC100CaMRA430MRA830EMRSodium PolystyreneSulfonateCalcium PolystyreneSulfonateCholestyraminePolyamineNOTE: The manufacturing site is approved by the FDA and is cGMP certified.Strong acid cation resin with sulfonic acid groups in sodium form; purified, ground and driedfor the treatment of hyperkalemia. Can also be used as a drug carrier for controlled release.Strong acid cation resin with sulfonic acid groups in the calcium form;purified, ground and dried for the treatment of hyperkalemia.Special strong base anion resin; purified chloride form,ground and dried for treatment of high cholesterol.Weak base anion resin in free base form; purified, ground,dried and used as antacid to control gastric acidity.EXCIPIENTS AND TABLET DISINTEGRANTSPUROLITE TYPE REMARKS & APPLICATIONSC100HMRC108DRC115HMRC115KMRPolystyrene Sulfonic AcidPolyacrylic AcidPolacrilexPolacrilin PotassiumStrong acid cation resin with sulfonic acid groups in hydrogen form;purified, ground, dried and used as a drug carrier for controlled release.Special weak acid cation resin in hydrogen form; provided as very fine,dry beads and used as a drug carrier for controlled release or as taste masking.Weak acid cation resin in hydrogen form; purified, ground, dried andused as a drug carrier or as pH adjuster in the formulation of tablets.Weak acid cation resin in potassium form;purified, ground, dried and used as a tablet disintegrant.NOTE: Consult your local Purolite office for confirmation of regional, country or state regulatory compliance.ULTRAPURE WATER PRODUCTSULTRACLEANUCW9126UCW5072UCW1080TYPEGel StrongAcid CationGel StrongAcid CationMacroporousComplex AmineIONICFORMTOTALVOLUMECAPACITY(eq/l)MOISTURERETENTION%SPECIFICGRAVITYMOIST BEADSH + 1.9 49–54 1.21OH - 1.0 55–60 1.07FreeBase0.6(FB form)61–67(Cl - form)1.10REMARKS & APPLICATIONSUltrapure Water Cation Resin with very low TOC release operatingin single beds or mixed beds with anion component UCW5072.Ultrapure Water Anion Resin with very low TOC release operatingin single beds or mixed beds with cation component UCW9126.Semiconductor Industry - Ultrapure Water forSelective Boron Removal.ULTRAPURE WATER MIXED BEDSULTRACLEANIONICFORMTOTALWORKINGCAPACITY eq/lMOISTURERENTENTION%REMARKS & APPLICATIONSUCW9964 H + / OH - Cation: 1.9Anion: 1.0UCW9966 H + / OH - Cation: 1.9Anion: 1.0UCW3600 H + / OH - Cation: 1.9Anion: 1.1UCW3700 H + / OH - Cation: 1.9Anion: 1.0UCW3700 H + / OH - Cation: 2.0Anion: 1.0NOTE: The ratio of Cation to Anion is chemically equivalent at 1:1.Cation: 49 - 54%Anion: 55 - 60%(Cl- form)Cation: 49 - 54%Anion: 55 - 60%(Cl- form)Cation: 49 - 54%Anion: 55 - 62%Cation: 46 - 50%Anion: 60 - 70%Cation: 49 - 54%Anion: 60 - 70%Highest purity separable MB for final polishing and point of use treatmentfor UPW systems. Highest resistivity and very low TOC release.Highest purity non separable MB for final polishing and point of usetreatment for UPW systems. Highest resistivity and very low TOC release.High operating capacity separable Mixed Bed for UPW systems.Separable Mixed Bed for UPW systems.Separable Mixed Bed with higher capacity cation for UPW systems.10
HYDROMETALLURGICAL RESINSPUROLITEA100/2412S992A500CPlusPFA600/4740A660/4759PFA460/4783A500U/2788A500U/4994A560/4790A100MoS930PlusS930/4888S950S960A170/4675A172/4635S984S957TYPEMacroporousMixed BaseAnionMacroporousWeak Base /ChelatingMacroporousStrong BaseAnionGelStrong BaseAnionGelStrong AcidCationGelStrong AcidCationMacroporousStrong BaseAnionMacroporousStrong AcidCationMacroporousStrong AcidCationMacroporousMixed BaseAnionMacroporousChelatingMacroporousChelatingMacroporousChelatingMacroporousChelatingMacroporousWeak BaseAnionGelWeak BaseAnionMacroporousWeak Base /ChelatingMacroporousStrong AcidCation /ChelatingFUNCTIONALGROUPMixedTertiary &QuaternaryAminesMixedAminesQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumQuaternaryAmmoniumMixedTertiary &QuaternaryAminesMOISTUREIONICFORM CAPACITY RETENTION%Cl - 3.8 eq/kg 46–56FB 4.4 eq/kg 47–55Cl - 1.15 eq/l 57–63Cl - 1.6 eq/l 40–45Cl - 1.3 eq/l 44–52Cl - 1.3 eq/l 47–54Cl - 1.15 eq/l 53–58Cl - 1.15 eq/l 53–58Cl - 1.15 eq/l 49–56REMARKS & APPLICATIONSFor effective recovery of aurocyanide complexes obtained fromthe alkaline cyanide processing of gold ores. Suitable for RIPprocess. 800-1300 µm grading.For effective recovery of aurocyanide complexes obtained fromthe alkaline cyanide processing of gold ores. Suitable for RIPprocess. 800-1300 µm grading.For effective recovery of gold complexes obtained from thethiosulfate processing of gold ores.For the extraction of uranyl sulfate and carbonatecomplexes from the leachates originated from ISL, batchor heap leaching processes.For the extraction of uranyl sulfate complexes from the sulfuricleachates. Suitable for RIP process. 800-1300 µm grading.For the extraction of uranyl sulfate complexes from theclean sulfuric solutions.For uranium recovery. Suitable for RIP process.800-1300 µm grading.For uranium recovery. Suitable for RIP process.710-1300 µm grading.For uranium recovery from the sulfuric solutions. Suitablefor RIP process. 800-1300 µm grading.Cl - 1.2 eq/l 48–56 For molybdenum recovery from acid solutions.Iminodiacetic Na + 50 g/l Cu 52–60 For base metals recovery from weak acid solutions.Iminodiacetic Na + 50 g/l Cu 52–60AminophosphonicBispicolylamineComplexAmineComplexAmineMixedprimary,secondaryand tertiaryaminesMixedSulfonic andPhosphonic*Some products can be supplied in customized ionic form.For base metals recovery from weak acid solutions. Suitablefor RIP process. 800-1300 µm grading.Na + 26 g/l Ca 60–68 For recovery of uranium from phosphoric acid.SO 42-25 g/l Ca 50–60FBFB1.3 eq/l1.2 eq/l42–47(Cl)25–45(Cl)For sorption of base metals from more concentrated sulfuricsolutions and separation of base metals.For selective sorption of rhenium from acid streams.Suitable for RIP process. 600-1200 µm grading.For separation of rhenium from molybdate.FB 2.7 eq/l 50–56 For tungsten impurity removal from molybdate solutions.Na + 18 g/l Fe 55–70For removal of ferric iron from copper, nickel orcobalt electrolytes as well as molybdenum sorption fromstrong acid solutions.11
Page 3 and 4: INDEXSTRONG ACID CATION EXCHANGERS
Page 6 and 7: STRONG BASE ANION EXCHANGERSPUROLIT
Page 9 and 10: READY TO USE MIXED BEDSPUROLITEIONI
Page 11: PURITY OF NUCLEAR GRADE ION EXCHANG
Page 15 and 16: CHROMATOGRAPHIC RESINSPUROLITEPCR14
Page 17 and 18: ENZYME CARRIERSPUROLITETYPEFUNCTION
Page 19 and 20: ABBREVIATIONSCIX-ROEDMEDTAEPHDPVCIE

PRODUCT INFORMATION Product Summary Guide - Purolite

Create successful ePaper yourself

Delete template?

Save as template?