Screw testing machines Torsion testing machines TesT - TesT GmbH

More documents

Recommendations

Info

Model 210 Torsion test machines Standard models Table model Model with Mechanical Length of the Height Speed Electrical work table connection fitting space with- between connection driving side out holding fixture tips 210.1Nm x Square 1/4“ 0...500 mm 210 mm 0...20 min -1 230V 210.5Nm x Square 1/4“ 0...500 mm 210 mm 0...20 min -1 230V 210.10Nm x Square 1/4“ 0...500 mm 210 mm 0...20 min -1 230V 210.50Nm x Square 3/8“ 0...500 mm 210 mm 0...20 min -1 230V 210.100Nm x Square 3/8“ 0...500 mm 210 mm 0...20 min -1 230V 210.200Nm x Square 3/4“ 0...500 mm 210 mm 0...20 min -1 230V 210.500Nm x Square 3/4“ 0...500 mm 210 mm 0...20 min -1 230V 210.1000Nm x Square 1“ 0...500 mm 210 mm 0...20 min -1 400V 210.2000Nm x Square 1 1/2“ 0...500 mm 320 mm 0...20 min -1 400V Model 201.1Nm with control electronics Model 810 Model 210.50Nm with Hold-down attachment Torque receiver Model 415, implementation with flange, carriage and cone bearings 6 Other measuring ranges are available on request. The minimum and maximum length of the parts to be examined affects the length of the rails for the displaceable carriage and for the overall length of the machine table. The clamping fixtures are adapted to the samples and likewise affects the machine length and height. Combined testing facility for torsion-, tensile and compression tests within the upper working area and tensile and compression tests within the lower working area.
Control and evaluation PC card system model 822 for the controlling of the machines of the series 210 and model 842 for the series 205 and 208: TesT supplies PC cards, which are integrated directly in the PCI bus of the PC. Each PC (IBM compatible) with a PCI slot can be used. • Plug and Play- Concept • Real-time recording of measurement • 32 bit Controller • Measuring frequency >10kHz • control frequency > 1kHz • Input ports for the connection of peripheral devices Diagram: force/moment, force/angle of rotation Diagram: force/head friction torque, force/thread friction torque/friction rays/utilization PC-Card Set Model 822, 842 with Manual control Diagram: torque/angle TesTWinner ® 922 and 942 • Simple operation • Real time tests • Online-Calculations • General instructions for free programming • Import and export of measuring data • Universal test programs usable for different standards • Statistic functions Diagram: force/coefficient of friction 7
Page 1 and 2: TesT Screw testing machines Torsion
Page 3 and 4: Model 205 Friction testing machines
Page 5: Model 210 Torsion test machines App

Screw testing machines Torsion testing machines TesT - TesT GmbH

Create successful ePaper yourself

Delete template?

Save as template?