11.07.2015 Views

Vecon - VES

Vecon - VES

Vecon - VES

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Low noise, high specification duty range 9.4 to 94.7kWASERIESCondensingUnitsStandard FeaturesCooling only and heat pumpoptionR407C refrigerantGalvanised and painted toRAL 9010Hermetic scroll compressorsQuiet operationHP/LP protectionCommon fault indicationRemote on/offOptional ExtrasOn/off condenser head pressure control(low ambient kit) includes crank case heaterProportional condenser head pressure control(low ambient kit) includes crank case heaterMains switch (only on models 24E to 86D)Phase sequence protectionSoft starter (reducing peak compressor startingcurrent by 40%)Hot gas bypass valve (only on models 24Eto 86D)Condenser coil protection grille(Note: standard on models 10E to 22E)Coil fin anti-corrosion protection (for aggressiveenvironments)Anti vibration mounts (rubber)Low noise kit (comprising of compressor acousticjacket and proportional head pressure control)Service valves (10E - 22E with flared connections,24E to 86D with welded connections)R407C refrigerant pre-charged at factory (includesservice valves) but does not allow for systemcharge of refrigerant (for connection lines)Performance DataVECON Cooling Cooling Heating No. of No. of No. of Power Maximum MaximumModel* capacity capacity capacity circuits compressors capacity consumption current startingkw when kw when kw /fans steps kw amps currentevap. 5°C evap. 8°C ampsA10E 9.4 10.6 - 1 1/1 1 2.7 9.7 46.0A12E 11.9 13.5 - 1 1/2 1 3.2 12.5 50.0A16E 14.1 15.9 - 1 1/2 1 4.2 15.4 66.0A18E 16.9 19.0 - 1 1/2 1 4.8 18.4 74.0A22E 18.5 20.9 - 1 1/2 1 5.7 20.7 101.0A24E 21.0 23.7 19.2 1 1/2 1 5.9 15.6 100.6A32E 29.2 32.9 25.8 1 1/1 1 8.8 24.5 130.5A38E 36.1 40.7 31.7 1 1/1 1 10.8 29.1 161.5A43E 41.0 46.0 37.0 1 1/1 1 13.5 33.5 192.5A48D 41.6 47.0 38.4 2 2/2 2 12.7 34.0 119.0A64D 58.3 65.8 51.7 2 2/2 2 17.6 49.0 155.0A76D 72.1 81.4 63.4 2 2/2 2 21.6 58.2 190.6A86D 84.0 94.7 74.0 2 2/2 2 25.9 67.0 226.0*Model no’s: add suffix ‘C’ for cooling only or ‘P’ for heat pump operation.Cooling capacity based on evaporating at +5°C or +8°C with ambient temperature of 30°C.Heating capacity kw when ambient 0°C.All units supply voltage 400 volt 3 phase 50Hz, plus neutral.All condensing units are supplied with a nitrogen holding charge as standard.4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!