dc/2012 ONE EYE CATALOGUE.pdf

conbear.com
  • No tags were found...

dc/2012 ONE EYE CATALOGUE.pdf

1000 Reusable Series Magnetic Oil Filter Magnets Filter PadsN E W !Magnetic PatchA quick & secure way of repairing holes in:- Steel Pipe - Round Radius Elbows - Flat Back Elbows – Silos - ChutesThe Magnetic Patch is a temporary solution designed toplug off holes in piping, drop chutes and silos allowingproduction to be maintained. It is easily installed andremoved during a scheduled down time.The Magnetic patch comes in two sizes and can be cutinto smaller sizes to accommodate smaller holes andpipes.Custom sizes and designs are available for slurry productapplications and high temperature applications up to300F.Model Number Dimensions1MP813 - 8" x 13" x 3/8"1MP1713 - 17" x 13" x 3/8"Yard-Master1YM32The “Yard-Master” handles the toughest scrapmetal problems and reducing costly tire damage& personal injury. Designed with OEI’s patentedmagnetic technology that allows the magneticsweeper to float over the ground while keepingconstant contact with the ground extracting debrissuch as nails, screws, staples, banding, iron chipsunder the ground surface that become exposedunder the pressure of a tire.The Yard-Master is constructed with high quality airfilled 6” tires for ease of maneuvering, available in3 lengths 12” for shop, 32” for shop or small yardsand 42” and custom sizes for yard use. The magneticsweeper is easily removed from the carrier forcleaning, simply place over a refuge receptacle andwipe clean with a heavy cloth or gloved hand.ISO 9000 ISO • Reusable 9000 • Reusable www.OneEyeIndustries.com• 1 Year • Warranty 3 Year Warranty on Pads • • 10+ 5 Year Lifeon Pads3


2000 • 2500 • 3000 Series Magnetic Filter Rods2000/2500/3000 Series Magnetic Filter Rods are designed to be installed in reservoirs, gear boxes, filter elements, pipe linesand more. These Magnetic Filters will trap ferrous contaminants and non-ferrous contaminates (by static adhesion) to sub micronlevels. Available in a variety of magnetic filter rod sizes and fasteners.National Course orMetric ThreadMagnetic BaseNPT, ORB, BSP orMetric PlugCam-lock withMale AdapterAttach inside transmission andhydraulic cartridge elements.Install inline before sock filters toeliminate worm holing.Install in tank at theinlet/outletOEI manufactures all our Magnetic Filter Rods with 304/316 Stainless Steel Tubing (Monel and other Stainless grades are available).Rare Earth Magnets are installed in our patented method that creates the most powerful non-electric magnetic fields available. Forfiltration of Ferrous and Nonferrous (hydro statically charged) contamination down to sub-micron levels in all fluids, gases, chips andpowders etc. Designed to be user friendly (easily cleaned) long life (10+ years) of service, custom designs are welcome.Protective CageMagnetic Filter Protective CageHow To Order .....Box 1 Box 225RPC 12OEI's protective cage is designed toaid in the installation and removal ofthe magnetic filter.Magnetic FilterBox 1MagneticFilter Size2RPC - 1/2" Dia.Box 2MagneticFilter LengthIn InchesThe protective cage is supplied withall 3R2 magnetic filters as a safetyprecaution due to the magnetic filtersstrength.25RPC - 3/4" Dia.3RPC - 1" Dia.3R2PC - 2"Dia.ISO ISO 9000 9000 • • Reusable • 1 • Year 3 Year Warranty Warranty on on Pads Rods • 5 Year • 10+ Life Year on Life Pads4


2000 • 2500 Reusable • 3000 Series Oil Filter Magnetic Magnets Filter RodsHOW TO ORDER:2000/2500/3000 Series Magnetic Filter Rods3RT12D31225RNC387T3HDMODEL CODE:Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 825R NC 38 7 T 3 HDBox 12R25R3R3R2Box 2BlankHHBox 3NCNPTBSPPBSPTMORBMBMBADSCLTCUAJITMagnetic Filter Rod1/2” Diameter3/4” Diameter1” Diameter2” DiameterIncludes Protective CageTemperature300F / 150C600F / 300CFastenerNation Course ThreadNation Pipe ThreadBritish Standard PipeParallelBritish Standard PipeTaperedMetric ThreadO-Ring BossMagnetic BaseMagnetic Base AdjustableDual StandCam-LockTeeCustomAdjustableInternal Thread (Female)Box 4 Fastener Size5/16” NC-Only3/8” NC-Only1/2”5/8”3/4”1”1 1/4”1 1/2”2”10 mm Bolt Thread Only12 mm Bolt Thread Only14 mm16 mm18 mm20 mm22 mm24 mm50 mmEtc.for MB, MBA, DS,BlankCL or TeeBox 5Box 6BlankISESIHEHTDMagnetic LengthInsert in Inches3, 3 1/2, 4, 7, 12, 16, 24, etc.Fastener ToolNC, MB, MBA, CLor DSInternal SquareExternal SquareInternal HexExternal HexTee EndDiskBox 7 T or D LengthInsert in Inches1, 112, 134, 2, 3, 312, etc.Box 8BlankHDFGHPDesign StrengthStationaryEquipmentMobile EquipmentFood GradeHigh Pressure(over 300 PSI)* Custom Designs are AvailableISO ISO 9000 9000 • • Reusable • 1 • Year 3 Year Warranty on on Pads Rods • 5 Year • 10+ Life Year on Life Pads5


N E W !Reusable Pall Magnetic Oil Filter Filters MagnetsOEI has manufactured a magnetic filter specifically for the PALL "Marksman & HF Series" at the request ofour customers. the magnetic filter is easily installed and removed for inspection and cleaning. As with all OEImagnetic filter this will enhance your fluid cleanliness and extend equipment life.PALL Marksman SeriesSize OEI Part #1 Bag 3RT12PALLT18652 Bag 3RT24PALLT186540 inch 3RT40PALLT1865PALL HF SeriesSize OEI Part #20 inch 3RT20PALLHF40 inch 3RT40PALLHF60 inch 3RT60PALLHFFoot Rest to protect the elementHandle ClampParker "ModuFlow Series"Magnetic FiltersOEI has manufactured a magnetic filter specifically for the Parker "Moduflow Series" at the request of ourcustomers. The magnetic filter is easily installed and removed for inspection and cleaning. As with all OEImagnetic filter this will enhance your fluid cleanliness and extend equipment life.Original ModuFlow SeriesOEI PART # - 2RMFD334ModuFlow "Plus" SeriesSingle Element - 2RMFP7Double Element - 2RMFP17ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads6


OEM CAT Magnetic FilterOld Ceramic TechnologyCaterpillar Industrial Reusable Filtration Oil Filter Filter EnhancementSolutions MagnetsCAT Transmission Replacement Filter25RCAT-7160 (with 3S-3439 Plate)25RCAT-3251 (with 8P-3251 Plate)The OEI magnetic filter is designed to replace the ceramic OEM magneticfiltration technology.OEI’s powerful rare earth magnetic fields dramatically improve filtrationof ferrous contamination to sub-micron levels. This allows easy cleaningand collection for analysis of the trapped contamination, extendingfluid and transmission component life. Increases operational time anddecreases maintenance costs.Another advantage is to eliminate the opportunity for the OEM magneticfilter to contaminate the transmission fluid as a result of vibration andfracturing of the exposed ceramic magnets.CAT Sump Filter Enhancement25RCAT-1W1564The 25RCAT-1W1564 magnetic filter is designed to be installed in the engine sump screen filter (1W-1564) enhancing itsfiltration capability to sub-micron levels with the use of OEI's patented magnetic technology.The magnetic filter has been designed for easy installation, simply remove the bolt and washer #8-9, place the washer onthe magnetic filter and use the magnetic filter to hold the sump screen in place. A Tee handle has been installed to assistwith the installation.N E W !CAT Motor Grader Chain Case Magnetic Filtration SystemOEI now offers the Motor Grader Chain CaseMagnetic Filter with the inspection plateready for installation on the 16H, G, M, and24H, G, M.These plates can also be order seperately.16H, G, M Motor Grader1PCAT-4D7678NPT24H, G, M Motor Grader1PCAT-1206157NPTISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads7Magnetic Filter and inspection plate forCAT Motor GraderModel Part Number16H, G, M - 3R20HD78PL24H, G, M - 3R24HD78PL


Komatsu Hydraulic Filter EnhancementN E W !PC 1250 Enhanced Hydraulic FiltrationOEI has designed a reusable Stainless Steel Element (9ELSS77532x25) to replaceKomatsu's 209-60-77531 disposable element. OEI's stainless steel elements provide maximumfiltration protection, eliminating any chance of “channelling or worm holing” the elementis reusable and available in 40, 25 or 10 micron β200 rating.The 2RNC3810T3 magnetic filter is designed to be installed in the Hydraulic Element Filter(209-60-77532) magnetic technology.The magnetic filter has been designed for easy installation, simply remove the strainer anddrill a 3/8" hole in the center bottom, attached the magnetic filter with (2) 3/8" washersplace (1) washer on the magnetic filter insert through the strainer and fasten with the 2ndwasher and 3/8" nut. The tee handle is designed to keep the magnetic filter centered in theelement.Komatsu Wheel Motor FiltrationMagnetic Filter / Level Monitor25RFC787One Eye Industries is pleased to announce an innovative way to filter the contamination inthe Komatsu 830E & GE 787 wheel motors. This magnetic filter design offers a multipurpose;first it acts as a level monitor for the oil, second as a filter to remove the most damagingcontaminant “ferrous metal” to submicron levels. The third is a predictive maintenance tool,simply remove the trapped contamination and send it away to a lab for analysis.The test will identify premature wear patterns of the components and allow predictivemaintenance scheduling. The adjacent photo shows this magnetic filter is designed with ournew 3/4” diameter magnetic filter projecting multiple 4” radial fields. A level line has beenmarked on the filter to aid in the maintenance of this unit. See our case study informationon our web-site to see the results of applications around the world.Magnetic FilterDip StickSample Port4 in 1 Magnetic Filter/ Level Monitor/ SamplingPort2RFCS787- #One Eye Industries is pleased to announce an innovative way to filterand prevent ingression contamination in the Komatsu 830E & GE787 wheel motors. This design is multipurpose; first it acts as a levelmonitor for the oil, second as a filter to remove the most damagingcontaminant “ferrous metal” to submicron levels, third capable ofextracting an oil sample without removing the filler cap reducing theopportunity for foreign materials to enter. The fourth is a predictivemaintenance tool, simply remove the trapped contamination from themagnetic filter and send it away to a lab for analysis.The test will identify premature wear patterns of the components andallow predictive maintenance scheduling. The adjacent photos showsthe magnetic filter is designed with a 1/2” diameter projecting multiple3” radial fields. A dip stick and a sampling port has been installed to aidin the preventative maintenance of this unit.2RFCS787-2 or 2RFCS787-12(1/4" OR 5/16" Sample Tube) (1/2" Sample Tube)ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads8


7000 Series PlugsOEI manufactures plugs with High EnergyMagnetics, designed to replace the OEMindustries standard ceramic magnetic plugsfor final drives, rear ends, transfer cases andtransmissions.* 300F Operating Temperature (600F optional)How to Order ...Box 1 Box 2 Box 3 Box 4 Box 5 Box 67P M 16 15 EHBox 17PBox 2BlankHHBox 3NPTBSPPBSPTMORBMagnetic PlugPlugTemperature300F / 150C600F / 300CFastenerNation Pipe ThreadBritish Standard PipeParallelBritish Standard PipeTaperedMetric ThreadO-Ring BossBox 4InchesNPT, BSP1/8”1/4”3/8”1/2”3/4”1”1 1/4”1 1/2”2”2 1/2"Plug Sizes & TypesMetric SizesORB Sizes10mm -0412mm -0514mm -0616mm -0818mm -1020mm -1222mm -1426mm -1627mm -2030mm -2433mm -3236mmetc.Box 5Metric Thread1.01.251.52.0Box 6ISESIHEHESDFastener ToolInternal SquareExternal SquareInternal HexExternal HexExternal SquareDrilled* Custom Sizes and Designs are availableISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads9


OEMPart #OEM Reusable / OEI Cross Oil Filter Reference Magnets List"Custom" = OEI's Designed Magnetic FilterMagnetic Filter Plugs & Magnetic Filter RodsISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads10OEI PartNumberAtlas Copco5541506500ST 1520 Scoop Truck7PM3320EHCustom ST 8B - Scoop Truck Hydraulic Tank 3R24HDAC2ESCAT1W-1564 Magnetic Filter for Engine Sump Filter (1W-1564) 3/4" x 6" w/ 3/8"nc and 2.875 x 3/8" Support tee25RCAT-1W15642A-3852 777 Final Drive/ Planetary, 16-H Grader Chain Case, 789 / 793 Front Wheel Cover, 621 B Final Drive 7PCAT-38372A-3852 Custom Design - 4"long x 1/2" diameter - Magnetic filter on a 2A-3852 25RCAT-38522H-3865 Magnetic Drain Plug Inside Square 7PCAT-2H38653E-2338For: 854G Rubber Dozer Engine, 5130B Excavator, 789 Cat Haul Truck Transmission, 793 Cat Haul Truck Transmission,330 Excavator Final Drive, 621F Cat Scraper Final Drive Plug, 345 Excavator Final Drive, 375 Excavator7PCAT-3E23383H-4190 793D Haul Truck Drive Pumps Drain Plug 7PCAT-3H41904B-2363 For: CAT 245 Excavator Sump Final Drive 7PCAT-23634D-7678 CAT 16H, G, M - Motor Grader Chain Case Inspection Plate 1PCAT-4D76784T-2069 D10 Pivot Shaft Fill & Drain Plug 7PCAT-20695K-7696 Wheel Loader Final Drive & Brake 988,992,836,B35C 7PCAT-76965P-8005 621F Scraper Transmission Housing Plug 7PCAT-80055P-8006 621F Scraper Transmission Housing Plug 7PCAT-80065P-4484 For: 854 R.T. Dozer Differential, 834 R.T. Dozer Differential, 988, 992 Differentials 7PCAT-44846B-5262 777 Final Drive/ Planetary, 16-H Grader Chain Case, 789 / 793 Front Wheel Cover, 621 B Final Drive 7PCAT-38376E-5047 For: 140H Grader Tandem Drive Plug -08 IH 7PCAT-50476E-7696 For: 140H Grader Tandem Drive Plug -08 IH 7PCAT-50476V-0439 For: 789 Cat Truck Final Drive, 854-G R.T Dozer Final Drive, 992 Wheel Loader 7PCAT-04396V-3298For: D-8 Transmission & Final Drive, D 9L, D-10 Transmission, D-IIR Final Drive, D-IIN Final Drive,793 Rear Axle Drain, 797 Differential & Final Drive3RCAT-83346V-3963 For: D6 Final Drive & Differential Drive, 793 Final Drive 3RCAT-39638B-6599 For: 637 Cat Scraper Transmission Plug 7PCAT-65998M-3837777 Final Drive/ Planetary, 16-H Grader Chain Case, 789C / 793CD Front Wheel Cover, 621 B Final Drive 785C,988H, G7PCAT-38378M-5576For: 24-H Grader Differential, 789 Cat Truck Rear Axle Housing, 793 Cat Truck Rear Axle Housing777 Cat Truck Rear Axle Housing, 785 Cat Truck Rear Axle Housing7PCAT-55768M-7160 Magnetic Filter For Transmission (3/4" x 9" w/ Plate (3S3439) ) 25RCAT-7160M-2782D For: Twin Disc Transmission - 345 Final Drive 7PCAT-2782D9J-7031For: D-IIR Hydraulic Tank Drain and Engine, D-IIN Hydraulic Tank Drain and Engine, 621F Cat ScraperFinal Drive, 24-H Hydraulic Grader, 854-G R.Tire Hydraulic Dozer7PCAT-70319S-4181For: 854G Rubber Dozer Engine, 5130B Excavator, 789 Cat Haul Truck Transmission, 793 Cat Haul Truck Trans,330 Excavator Final Drive, 621F Cat Scraper Final Drive Plug, 345 Excavator Final Drive, 375 Excavator,D107PCAT-41819S-4182 For: D-10R Hydraulics, D-10N Hydraulics, D10T 7PCAT-41829S-4183 For: 854G R.T. Dozer Engine, 5130B Excavator Engine 7PCAT-41839S-4185 D 10 Dozer Final Drive Drain Plug 7PCAT-41859S-4205 For 621E CAT Scraper 7PCAT-42059S-4208For: 854G Rubber Dozer Engine, 5130B Excavator, 789 Cat Haul Truck Transmission, 793 Cat Haul Truck Transmission,330 Excavator Final Drive, 621F Cat Scraper Final Drive Plug, 345 Excavator Final Drive, 375 Excavator7PCAT-41819S-8004 For: 24-H Motor Grader - Tandem Housing 7PCAT-80049S-8006 For. CAT 5110 Excavator Sump Final Drive 7PCAT-9S80069X-6451 For: C-15 CAT Engine Pan Plug 7PC15EEH


OEM Reusable / OEI Cross Oil Filter Reference Magnets ListOEM PartNumberMagnetic Filter Plugs & Magnetic Filter RodsCAT Continued106-8187 D10 Transmission Drain Plug 7PCAT-8187ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads11OEI PartNumber175-6689For: 24-H Grader Differential, 789 Cat Truck Rear Axle Housing, 793 Cat Truck Rear Axle Housing777 Cat Truck Rear Axle Housing, 785 Cat Truck Rear Axle Housing7PCAT-5576Custom CAT 16-H, G, M Grader Chain Case Magnetic Filter "Includes stainless steel half coupler for 2" NPT Plug" 3R20HD78Custom CAT 24-H, G, M Grader Chain Case Magnetic Filter "Includes stainless steel half coupler for 2" NPT Plug" 3R24HD78Custom CAT 16-H, G, M Grader Chain Case Magnetic Filter "Includes modified inspection for Magnetic Filter" 3R20HD78PLCustom CAT 24-H, G, M Grader Chain Case Magnetic Filter "Includes modified inspection for Magnetic Filter" 3R24HD78PLCustom CAT D-8,D-9,D-10,D-11 Hydraulic Reservoir Magnetic Filter w/ Cam-Lock Mount 3RCL18HDP & HCustom P&H 2800 Shovel Crowd Case "Includes stainless steel half coupler for 2" NPT external hex head" 3R18HD78Custom P&H 2300 Propel Gear Box Upper Location " Cam Lock Mount 24" Total Length, 20 " Magnetic Filter 3RCL24HDCU4Custom P&H 2300 Propel Gear Box Lower Location " Cam Lock Mount 28" Total Length 12" Magnetic Filter 3RCL28HDCU16KOMATSUCustom KOMATSU 830E Hydraulic Tank Cap # TP 0623 with 24" Magnetic Filter 3RORB3224IHCustom GE 787 Wheel Drive Filler Cap with (Sample Port / Dip Stick and Magnetic Filter.) (GE#41B538253P1) 2RFCS787Custom GE 787 Wheel Drive Filler Cap with (1/4 or 5/16" Sample Port Dip Stick and Magnetic Filter.) 2RFCS787-2Custom GE 787 Wheel Drive Filler Cap with (1/2" Sample Port Dip Stick and Magnetic Filter 2RFCS787-12Custom GE 787 Wheel Drive Long Filler Cap with (1/2" Sample Port Dip Stick and Magnetic Filter.) 2RFCS787-127Custom GE 787 Wheel Motor Filler Cap With Magnetic Filter 6" in Length (GE#41B538253P1) 25RFC78707044-12412 830E Plug # 12412 7PM2415EH07044-13620 Komatsu Plug # 31420, #13620 7PM3615EH07044-31420 Komatsu Plug # 31420, #13620 7PM3615EHH6881 830E Front Spindle Plug # H6881 7PNPT1ISSF 9435 830E For: Haul Truck Wheel Drive Reservoir Plug 2RNPT1149ESTY 8879 930E Front Spindle Plug # 7PNPT114ISVJ 6489 830E Haul Truck Upper Wheel Drive Plug #VJ 6489 7PNPT114ESVS 8411 VS 8411 Komatsu Wheel Drive Plug 42mm x 2.0 Magnetic Plug 7PM4220IH209-60-77532 Hydraulic Element Filter For: PC1250 9ELSS77532x2521N-60-12210 Hydraulic Spin on Filter For: PC1250 9ADV9-9377LETOURNEAU200-0002 Letourneau 200-0002 For: 1850 Final Drive 7PLET5262LIEBHERR409710601 Liebherr T282 Haul Truck Plug Part # 409710601 7PM3320EHLiebherr 380 For: Ton Wheel Drive Haul Truck7PORB16IHReclaimer Plug Long Travel Gear Box 42mm x 2.0 Magnetic Plug 7PM4220IHSISU 98073 For: Final Drive (Western Star Haul Truck), 793/7897PORBSISU72SISU Differential (Western Star Haul Truck) 793/7897PORBSISUH7510336-F Front Wheel Brake Assem. Plug 2RLBR10336FJohn DeereR26727 John Deer R26727 For: G Series Back Hoe Axle Differential MT-2075, 310-G, 210-LE 2RORB5727HITACHI5500 Loader Final Drive 7PHITC114HyundaiLoader HL770-77PMM2215ISFord New Holland9848947 Rear Differential Drain Plug 7PFD-8947SandvikLH621 Wheel End Differential7PSCK-9842Custom Sizes and Designs are available


4000 Series Magnetic Funnel Scrubbers4150 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4150FG (Process Food Grade) 304/316 S/S 1-1/2" Inlet/Outlet 31-1/2" L x 4" D (Houses 3-3RF334 magnetic rods)3RF3341" x 4-1/4" S/S Rod w/2" Ferrules Fastener (fits 4FS4150FG)4FSHDSPC2HD Single Pin Clamp (fastens magnetic rod to scrubber)4FSBG2Buna Gasket Ring (seals magnetic rod to scrubber)4FS4150IG (Industrial Grade) 304/316 S/S 1-1/2" Inlet/Outlet 19-1/2" L x 3" D (Houses 3-3RCL334 magnetic rods)3RCL3341" x 3-3/4" S/S Rod w/1-1/2" Cam Lock Fastener (fits 4FS4150IG)4FSCLBG15Buna Gasket Ring (seals magnetic rod to scrubber)4200 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4200FG (Process Food Grade) 304/316 S/S 2" Inlet/outlet 27-1/2" L x 4" D (Houses 3-3RF434 magnetic rods)3RF4341" x 4-1/4" S/S Rod w/2" Ferrules Fastener (fits 4FS4300/4200FG)4FSHDSPC2HD Single Pin Clamp (fastens magnetic rod to scrubber)4FSBG2Buna Gasket Ring (seals magnetic rod to scrubber)4FS4200IG (Industrial Grade) 304/316 S/S 2" Inlet/Outlet 19-1/2" L x 4" D (Houses 3-3RCL434 magnetic rods)3RCL4341" x 4-3/4" S/S Rod w/1-1/2" Cam Lock Fastener (fits 4FS4300/4200IG)4FSCLBG15Buna Gasket Ring (seals magnetic rod to scrubber)4300 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4300 (Process Food Grade) 304/316 S/S 3" Inlet/Outlet 19" L x 4" D (Houses 3-3RF434 magnetic rods)3RF4341" x 4-1/4" S/S Rod w/2" Ferrules Fastener (fits 4FS4300/4200FG)4FSHDSPC2HD Single Pin Clamp (fastens magnetic rod to scrubber)4FSBG2Buna Gasket Ring (seals magnetic rod to scrubber)4FS4300IG (Industrial Grade) 304/316 S/S 3" Inlet/Outlet 19-1/2" L x 4" D (Houses 3-3RCL434 magnetic rods)3RCL4341" x 4-3/4" S/S Rod w/1-1/2" Cam Lock Fastener (fits 4FS4300/4200IG)4FSCLBG15Buna Gasket Ring (seals magnetic rod to scrubber)4400 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4400FG (Process Food Grade) 304/316 S/S 4" Inlet/Outlet 23-1/2" L x 6" D (Houses 3-3RF634 magnetic rods)3RF6341" x 6-3/4" S/S Rod w/2" Ferrules Fastener (fits 4FS4400FG Funnel Scrubber)4FSHDSPC2HD Single Pin Clamp (fastens magnetic rod to scrubber)4FSBG2Buna Gasket Ring (seals magnetic rod to scrubber)4FS4400IG (Industrial grade) 304/316 S/S 4" Inlet/Outlet 23-1/2" L x 6" D (Houses 3-3RCL634 magnetic rods)3RCL6341" x 6-3/4" S/S Rod w/1-1/2" Cam Lock Fastener (fits 4FS4400IG)4FSCLBG15Buna Gasket Ring (seals magnetic rod to scrubber)FS4600FG SERIES MAGNETIC FUNNEL SCRUBBERS4FS4600FG (Process Food Grade) 304/316 S/S 6" Inlet/Outlet 36" L x 8" D (Houses 4-3RF834 magnetic rods)3RF8341" x 8-3/4" S/S Rod w/2" Ferrules Fastener (fits 4FS4600FG Funnel Scrubber)4FSHDSPC2HD Single Pin Clamp (fastens magnetic rod to scrubber)4FSBG2Buna Gasket Ring (seals magnetic rod to scrubber)4FS4600IG (Industrial Grade) 304/316 S/S 6" Inlet/Outlet 36" L x 8" D (Houses 4-3RCL834 magnetic rods)4R3CL8341" x 8-3/4" S/S Rod w/2" Ferrules Fastener (fits 4FS4600IG Funnel Scrubber)4FSCLBG15Buna Gasket Ring (seals magnetic rod to scrubber)4800 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4800FG (Process Food Grade) 304/316 S/S 8" Inlet/Outlet 36" L x 10" D (Houses 4-3RF1034 magnetic rods)3RF10341" x 10-3/4" S/S Rod w/2" Ferrule Fastener (fits 4FS4800FG Funnel Scrubber)4FSHDSPC2HD Single Pin Clamp (fastens magnetic rod to scrubber)4FSBG2Buna Gasket Ring (seals magnetic rod to scrubber)4FS4800IG (Industrial Grade) 304/316 S/S 8" Inlet/Outlet 36" L x 10" D (Houses 4-3RCL1034 magnetic rods)3RCL10341" x 10-3/4" S/S Rod w/1-1/2" Cam Lock Fastener (fits 4FS4800IG Funnel Scrubber)4FSCLBG15Buna Gasket Ring (seals magnetic rod to scrubber)ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads13


5000 Series Magnetic Filter ScrubberScrubberInlet/Outlet standard size is 1 1/2" NPT. Other sizes areavailable upon request, 1/4" to 1 1/2". * When installingremember to allow clearance for rod removal.5SC34 Series Scrubbers aredesigned for inline installation onlow flow, light viscosity fluids suchas fuel, engine lube, hydraulicsand coolant systems, allowing forfull exposure to the contaminationand easy removal for cleaning. Noflow restriction.Magnetic filter: 3/4” D x 9” LDimension: 3” x 3” x 13” HSquare Housing 150psi5SC34 Series Provides:• Total Filtration• 304/316 Stainless• Mounts horizontal or vertical• No flow restriction• Plumbed with W.O.G. valves(optional)• Monel Construction (optional)• 300 F Operating Temperature5000 Series Scrubbers areinstalled prior to pumps, or onreturn lines for fuel, lube oil,hydraulics, coolants and watersystems, allowing full exposure ofthe contaminants to the magneticfields. They are easily cleaned andthere is no flow restrictionOffset Ports0 degreesOffset PortsBottom5000 Series Magnetic Filter Scrubber5000 Series Provides:• Total Filtration• 304/316 Stainless• Mounts horizontal or vertical• No flow restriction• Plumbed with W.O.G. values(optional)• Monel Construction (optional)• 300 F or 600 F OperatingTemperature5SC Dimension lbs/Kg12” 4”x4”x16”H 16304 mm 101x101x406 mm 7.224” 4”x4”x28”H 28608 mm 101x101x711 mm 12.736” 4”x4”x40”H 38914 mm 101x101x1016 mm 19.35SC2 Dimension lbs/Kg24" 6”x6”x30”H 57608 mm 150x150x762 mm 25.9* Inlet/Outlet standard size is 2 1/2“ NPTOther sizes are available upon request,3/4" to 2 1/2”. * When installing rememberto allow for rod removal clearanceStandard Offset DesignSquare Housing 150 psi5SC012SCLNPT##5SCBTM12SCLNPT##5SC Custom OutletOutlet can be located in several positionstandard design is 180 degrees offthe inletSquare Housing 150 psi5SC ## RORBWLD ##This unit is designed with offsetin/outlet, a (R) round housing, theMagnetic Filter fastener is (ORB)Plug and the In/Outlet is (WLD)WeldletRound Housing 500 psiISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads145SCP12SCLNPT2This unit is designed with a (P) parallelin/outlet for easier installation.The ports can also be located nearthe top.(5SCPT12SCLNPT2)Square Housing150 psi


5000 Series Magnetic Filter Scrubber5SCD ## SCLFLN ##This unit is designed for larger pipingapplications, designed with offset in/outlet, 5SC- (D) Double magnetic filterwith (S) Square Housing, the magneticfilter fastener is (CL) cam-lock and the In/Outlet is (FLN) flange.5SCP ## SCLFLN ##This unit is designed for ease ofinstallation, 5SC- (P) Parallel In/OutletDesign with (S) Square Housing, themagnetic filter fastener is (CL) cam-lockand the In/Outlet is (FLN) flange.5SCPT ## SCLFLN ##This unit is designed for ease ofinstallation, 5SC- (P) Parallel In/Outlet (T) ports are located nearthe top, (S) Square Housing,(CL) cam-lock fastener for theMagnetic Filter and the In/Outletis (FLN) flange.N E W !Model #Body Dimension onlyW x D x H5SC349SCL 3 x 3 x 135SC4 x 4 x H5SCR4 “ Diameter x H5SCD4 x 6 x H5SCP6 x 4 x H5SCPR6” Diameter x H5SCPD6 x 6 x H5SCPDI4 x 8 x H5SC26 x 6 x H5SCWOC9FLN8Designed for high volume low pressurefluid filtration5SCDPI ## SCLNPT ##This unit is designed for ease ofinstallation, 5SC- (D) Dual MagneticFilters, (P) Parallel In/Outlet, (I) Inline,(S) Square Housing, (CL) Cam-lockmagnetic filter fasteners, (NPT) In/Outlet Ports. Designed for single passapplications such as fuel, chemical,water, etc.5SC2P5SC2PR5SC2PDNote:Note:8 x 6 x H8” Diameter x H8 x 12 x HH = Magnetic filter lengthplus 4 inchesRemoval clearance is equalto the filter heightISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads15


5000 SERIES SCRUBBERHOW TO ORDER: Select the desired code (in the correct position) to construct a product.EXAMPLE:Box 1: Box 2: Box 3: Box 4: Box 5: Box 6: Box 7: Box 8: Box 9: Box 10:5SC P D 24 S CL FLN 6 150Box 1 :5SCBox 2:34BlankHHMagnetic Filter3/4” Diameter Magnetic Filter3 x 3 x 13H Body size1” Diameter 300 F/ 150CHigh Heat1” Diameter 600F/300C2 2” Diameter 300F/ 150C2HHBox 3:BlankScrubber Model5000 SeriesLarge Flow SystemsHigh Heat2” Diameter 600F/300CIn/Outlet LocationOffset ports180 Degree off top port0Offset ports0 Degree off top portOffset ports90 90 Degree off top port(looking down from top)Offset ports270 270 Degree off top port(looking down from top)P Parallel Ports BottomPT Parallel Ports TopBTM Bottom PortSee inside back cover for Flow Rates ChartBox 4:BlankDDITQBox 5:9Length of Magnetic FilterRod9 inch Magnetic Filter Rod5SC34 Scrubber only12 12 inch Magnetic Filter Rod24 24 inch Magnetic Filter Rod36 36 inch Magnetic Filter RodBox 6:SRBox 7:CL# of Magnetic FiltersSingle Magnetic FilterDual Magnetic FilterDual InlineMagnetic FilterTriple Magnetic FilterQuadruple MagneticFilterHousing DesignSquare 150 psi ratingRound (500 psiw/ ORB Fastener)Fastener for MagneticFilterCam-Lock 150 psi ratingORB ORB 500 psi ratingBox 8:NPTFLNWLDBSPMBox 9:Port Size1/23/411 1/222 1/2etc.Box 10:Flange ANSIClass1503006009001500Port OptionsNation Pipe ThreadTaperedFlangeWeldletBritish PipeMetricISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads16


5000 Series Reusable Magnetic Oil Canister Filter Magnets Filtration SystemMagnetic Canister Filtration SystemOEI's dual filtration system has reinforced cleanable stainless steel cloth mediaelements combined with our patented magnetic filtration capable of filtering tosub-micron levels.Designed to replace traditional bag and sock filtration systems.Designed for filtering water, oil, coolant, cutting oil, fuel and cleaning solutions.* Custom Replacement elements with magnetic filters for existing bag filters andcartridge filters are availableFeatures:• Housing – Carbon or Stainless Steel construction, permanently piped in(up to 6” pipe size)• Elements 304 and 316 stainless steel, include magnetic filter rod• Extend cleaning life up to 3x, easy to clean• Reduce maintenance cost, PM• Eliminates bags, outer baskets, bag hold down assemblies, and bag restrainers• 150 psi (standard)• Carry all sizes – custom sizes are available• Flow rates up to 400 gpm – custom design for other flow rates• High heat applications are available• Long life 10+ yearsDimensions5CF-205CF-30A = 6" 6"B = 4" 4"C = 5.5" 5.5"D = 8" 8"E = 33" 52"F = 38" 57"G = 20" 20"Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 75CF 304 2 FLN BTM 25 VBox 1Model Number-Filter Length5CF-205CF-30Box 2Housing304316CS- CarbonSteelBox 3Pipe Size2346CustomBox 4In/OutletTypeFLN - FlangeNPT - ThreadBox 5In/OutletLocationBlank - 180 degree0 - 0 degree90 - 90 degree270 - 270 degreeBTM - BottomBox 6MicronRating1025406080100Box 7SealB - BunanE - Ethylene PropyleneV - VitonTEV - Teflon EncapslatedVitonTSW - Teflon (solidwhite)ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads17


Y-Strainer • Bronze • Bronze / BrassOEI introduces ourMagnetic Filter Y-Strainer SeriesOEI understands the importance of filtration and the restrictions of space on equipment.OEI saw the need to improve the filtering capabilities of the traditional Y-Strainer byinstalling our patented Magnetic Filter. The Y-Strainer is now capable of trapping ferrousand non-ferrous contaminants by static adhesion to the sub-micron range. This is a majorimprovement to many systems that rely on a Y-Strainer for protection. Visit our web sitefor more information, and view our case studies.• Chemical • Pneumatic Systems • Steering Systems • Grease Filtration• Brake Systems • Coolant Systems • Fuel Systems • Hydraulic Systems• Mobile & Static Equipment• Cryogenics ApplicationsN E W !OEI is pleased to offer our custom designedMagnetic Filter Y-Strainer for cryogenic applications.Our flanged access allows access for cleaning at -320degrees F. The magnetic filter removes both ferrousand non-ferrous contamination to submicron levelsextending the life of linings and pump components.Available in 2", 2 1/2" and 3" NPT port sizesIn.Sizemm1 25mm1 1/2 40mm2 50mm2 1/2 64mm3 75mm4 100mmWORKING PRESSURE (NON-SHOCK):300 PSI @ 350FSteam Rated 400 PSI @ 150F WOGDIMENSIONSA4 3/4 (12cm)5 3/4 (14.6cm)6 3/4 (17.1cm)8 (20cm)9 1/2 (23.5cm)12 (30.5cm)B4 (10cm)5 (12.7cm)6 (15.2cm)6 (15.2cm)7 (17.5cm)10 (25.4cm)NETWEIGHTLbs Kg3 1.45 2.37 3.212 5.516 7.322 10Box 1: Box 2: Box 3: Box 4: Box 5: Box 6:5Y B 112 T ABox 15Y- MagneticY-StrainerBox 2B - BronzeS - Stainless SteelBC- CryogenicsBox 3Pipe Size11 1/222 1/234Box 4Port TypeT - ThreadedF - FlangeBox 5Flange ANSIClassBronze leaveBlank1 - 1503 - 3006 - 600Box 6MeshX - No Mesh ScreenA - 20B - 30C - 40NOTE:BC- Y-strainer available in 2", 2 1/2", 3"9 - 90015 - 1500D - 60E - 100ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads18


600# / 1500# ANSI - 316SS - NPT ThreadY-Strainer • Stainless SteelOEI’s Stainless Steel MagneticFilter Y-Strainer SeriesTempF-20 to 100200300400500600# 1500#WorkingPressure1440124011201030965WorkingPressure36003095279525602390• Body has machine seat to hold screen securely.• Cap has a machined screen holder to alignscreen during installation and to retainsediment when cap is removed.• Body is machined to hold gasket in a blow-outproof design5YS2T6600#Size A B WT1” 4 9/16 3 1/2 51 1/2 6 1/4 5 102” 7 1/2 6 1/2 162 1/2 8 3/8 7 213 9 1/2 8 1/2 261500#Size A B WT1” 5 1/2 4 3/4 81 1/2 7 1/8 6 162” 8 5/16 6 5/8 22150#, 300#, 600# ANSI 316SS - Raised Face Flange150# 300# 600#TempFWorkingPressureWorkingPressureWorkingPressure-20 to 1002003004005002752402151951707206205605154801440124011201030955150#Size A B WT300#Size A B WT600#Size A B WT5YS112F31” 6 3/8 5 111 1/2 7 3/4 5 1/4 172” 7 7/8 6 233” 10 7 1/2 424” 12 1/8 11 732” 8 5/8 6 1/4 283” 12 8 1/4 564” 14 1/2 11 981” 8 3/8 5 161 1/2 9 7/8 6 242” 11 1/8 6 3/4 473” 13 3/8 9 1/2 891500# ANSI 316 SS - Raised Face / RJT Flange• Body has machine seat to hold screen securely.• Cover has a machined screen holder to align screen during installation and to retain sedimentwhen cap is removed.• Body is machined to hold gasket in a blow-out proof design.• Flanges are back faced or spot faced.5YS2F15TempF-20 to 100200300400500WorkingPressure36003095279525602390Size A B WT2” 13 3/4 8 5/8 96DescriptionBodyCapGasketScreenMaterialASTM A- 351 GR CF8MASTM A- 351 GR CF8MSpiral Wound SS304 SS Specify MeshISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads19


5000 Series Reusable Magnetic Oil Fuel Filter Gas Magnets Filtration SystemOEI Fuel Gas filtration system thats incorporates a magnetic separator as the primary filter anda pleated stainless steel cloth element as the final filter.This environmentally friendly design will filter black powder contamination to submicron levelsat an estimated 95+ efficency. This will significantly improve the burn and reduce the acid wearof the pistons and spark plugs.The magnetic separators have a 5+ years operational life and the cleanable stainless steel clothfilter elements have a 3 to 5+ years operational life.Our design allows the gas to have first contact with our magnetic separators stationed inside thestainless steel cloth elements thereby allowing an extended element operational life.The magnetic separators have the most powerful non-electric magnetic fields in the industrywith a holding strength of 300 Kg per 300 mm of length.This magnetic field strength creates the ability to extract and trap submicron contaminationwhile in high flow applications. The change out and cleaning intervals are policed by a differentialpressure gauge.N E W !Inlet 4.00"40.00"12.00"Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 75DFG 304 4 FLN 600 C1200 10Box 1Model5DFGBox 2Housing304316CustomBox 3Port SizeInches12346Etc.Box 4In/OutletTypeNPT - ThreadWLD - WeldletFLN - FlangeBox 5NPT - BlankWLD BlankFlange Class1503006009001500Box 6Flow RateG ### -GPMC ### - CFMBox 7MicronRating102540ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads20


5000 Series Magnetic Separator Cone StrainerPipe Line Corrosion Erosion ManagementTwo Stage Magnetic Separator Cone StrainerDesigned for start-ups of new and existing pipelines. Traditionally after start-up the cone straineris removed. The compressor and or pumps (meter) are left without protection from the ferrousmetal created by the erosion and corrosion of the pipeline. With OEI’s Magnetic Filtration ConeStrainer the screen can be removed and the Magnetic Filter reinstalled to offer continuousprotection.• Refineries • Oil & Gas Transmission Lines • Chemical plantsComplete Assembly Removable Cone Mesh Flange with Magnetic Filter ip• Mesh screen is removed andmagnetic filtration continues withminimal flow restriction• Protects compressors, pumps andflow meters• Traps Black Powder - ferrous andnon-ferrous contamination (due toadhesion)• Designed with OEI patentedmagnetic technology• Can be ordered with or withoutmesh screen cone• 2” D x 12” L magnetic filter hasholding capability of 600 lbsBox 1: Box 2: Box 3: Box 4: Box 5: Box 6: Box 75SSC 12 300 40 Y 80Box 1Stainless SteelCone Strainer* Quote per orderBox 2Pipe Size060810121416182024etc.Box 3Flange ANSIClass1503006009001500Box 4MeshNM - No MeshScreen20304060100Box 5Mesh Placement––– Flow––– Flow––– FlowWire meshon outsidesupportedWire meshon insidesupportedWire meshon outsidesupportedinsideNO# - StandardI - ClothR - ReinforcedBox 6Open AreaY - 200%Box 7PipeSchedule4080160XXSNote: Standard perforation is .125Other perforations are availableCustom sizes and designs availableISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads21


5000 Series Magnetic Separator Basket StrainerPipe Line Corrosion Erosion ManagementAll Stainless Steel (Fabricated)Oil & Gas • Pipeline • Refineries• All certification and testing are available to International Standards• Custom built to allow maximum Magnetic Separator employment5BTSQ-T Strainer Quick Opening5BTS-T StrainerT StrainerDrawing5BT905BS-Basket StrainerISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads22


5000 Series Magnetic Separator Basket StrainerPipe Line Corrosion Erosion ManagementPlease note: OEI magnetic separator basket strainers are designed with oversizedhousings to allow maximum employment of the magnetic separator to ensure thehighest efficientcy. Industry standard of pipe to body ratio is a 2.5 to 1 ratio and OEI’sratio is a minimum 4:1.A chart specifying body sizing is shown below.HOW TO ORDER…..Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 75BS 316L 06 600 20 40 HBox 15BS5BSQ5BTS5BTQ5BT905BT90QStrainer ModelBasket StrainerBasket StrainerQuick OpeningT Basket StrainerT Basket StrainerQuick OpeningT 90 Basket StrainerT 90 Basket StrainerQuick OpeningBox 4 Flange150 900300 1500600Box 5 Mesh20 8040 10060 ETCOEI Basket Strainer Body SizingBody SizePipe SizeDiameter3 84 106 168 1810 2412 26Box 2 Stainless Grade304 304L316 316L309 310Custom MaterialBox 3 Pipe Size / Inches3 12 244 14 306 16 368 18 4810 20 Etc.Box 6 Pipe Schedule40 16080 XXSBox 7ProductCChemicalsH Hydro Carbon FluidsNNatural GasWWaterLLNGwww.OneEyeIndustries.com23


8000 Reusable Series Oil Hydrostatic Filter Magnets LiftRegrind Mill Hydrostatic Lift Lube System8HLS-LP-HPThe prime function of the OEI Regrind Mill Hydrostatic Lift Lube System (HLS) is to lubricate the bearingduring the three critical periods encountered during start-up and shut-down of the mill. The HLS shouldbe operated during normal mill operation to maintain oil cleanliness and compliment the existing internallubrication system for the bearing. One HLS system is required for each bearing.Start-up is the critical period because of the frictional wear and stress developed prior to the formation ofan adequate hydrodynamic oil film on the bearing surfaces.The HLS is designed to float the mill on a film of oil which is introduced under high pressure (3000psi) atthe center of the load area of the bearing. A satisfactory oil film is thereby established prior to start-upand during the critical period following start-up. The HLS will maintain an ample lubricant film throughoutthe critical periods of operation such as an unbalanced load (rock) and thermal expansion and the coolingoff period.The HLS is equipped with state of the art environmentally friendly filtration to ensure protection frompremature wear of the entire system by maintaining a high level of oil cleanliness. The oil is filtered by apatented magnetic filter installed prior to the pump to protect the pump and again by the ADD-Vantage9000 after the pump allowing filtration to submicron levels. The HLS is housed in a cabinet enclosure forprotection from the harsh environment of the plant with quick connections for easy install and replacementfor maintenance. Pressure gauges are visible at all times and remote monitoring optional.* Custom Orders are availableISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads24


8000 Reusable Series Thermal Oil Filter Filtration Magnets SystemN E W !DUAL PURPOSE THERMAL KIDNEY LOOPCombining OEI submicron filtration capability and a thermal cooling system offers the ability to maintaina safe operational temperature and an ISO cleanliness level that will extend the lube oil and componentlife.For application on gear boxes, hydraulic and coolant systems. Equipped with temperature gauges andsample ports before entering the unit and after to identify the reduction in temperature and contaminationin the fluid or oil.Compact and available in custom designs for all applications to suit individual requirements. For mobileand static employment and powered by DC, AC and Hydraulic drive.Our Thermal Kidney Loop system is designed with a magnetic filter in our Scrubber format prior to thepump to remove the ferrous metals to submicron levels and protect the pump and the thermal componentsand an ADD-Vantage 9000 filter to remove any residual non ferrous contamination before returningthe fluid and or oil to the application.To ensure the most efficient and effective Thermal Kidney Loop for your application please identify thefollowing:• Static or Mobile Oil Temperature Abient Air Temperature• Power Source AC/ DC Viscocity Required Heat Rejection (KW)• Voltage / Phase Reservoir Size ( gallons) Air Flow (Suction or Push)ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads25


8000 Reusable Series Kidney Oil Filter Loop Magnets SystemTHE NEXT GENERATION KIDNEY LOOP FILTRATION SYSTEMSENVIRONMENTALLY FRIENDLY AND HIGHLY EFFICIENTGear Boxes - Hydraulics - Lube OilWater - Chemicals - Glycol - Transformer FluidsThe OEI Kidney Loop combines two filtration technologies in a three filtering stage design that offers a highlyefficient and environmentally friendly cleanable long life filtration system.1st Filtering Stage and primary filter is a magnetic scrubber utilizing OEI patented technology rated to submicronfiltration capability.2nd and 3rd Filtering Stage is the ADD-Vantage 9000 series dual filter. The 2nd Filtering Stage is a cleanablelong life stainless steel cloth media element that has an absolute rating of 25 or 40 microns and a nominal ratingof 8 to 10 microns. The stainless steel cloth media element eliminates the worm holing and channeling thatoccurs in cloth, paper, fiberglass, or polymer media. The 3rd and final Filtering Stage is a magnetic filter insidethe Add-Vantage 9000 stainless steel element to trap contamination to sub-micron levels.System Features• Positive Displacement Gear Pump• 5 - 10 gpm• Viscosity 500 or 1000 cSt• OEI 5000 Series Magnetic Scrubber• Removable Oil Spill / Drip Tray• On/Off Switch• Electrical System – InternationalRequirements• 16”W x 20”D x 30”HOptions• Disposable Elements• Water Absorbant Filter• OEI Series Scrubber 24” Height• ADD-Vantage 9000 Dual Filter 12” or 24”(reusable filter element and magnetic filter)• Differential Pressure Gauge• Pneumatic Pump• Sample Port• Mobile (Wheels)• Fluid Flow Gauge• Flow Switch• Particle Counter• Isolation Ball Valve• Customer Preferred Pump or Motor (brand)• Quick Connection Fittings8KLF-51-91-40-500-E-230-60-1-NPT-2* Custom orders are available.ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads26


8000 Series Kidney Loop System8KLF-51-1000-E-230-60-1-NPT-28KLF-52-1000-E-230-60-1-NPT-28KLF-52-92-25-1000-E-230-60-1-NPT-2Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8 Box 9 Box 108KLF 51 91 25 1000 E 240-50-3 NPT 2Box 18KLF8KLMBox 2Model NumberKindey FiltrationStationaryKidney FiltrationMobileScrubber Model51 12" Tall Scrubber52 24" Tall scrubberBox 3 ADD-Vantage 9000Blank No Filter Mount91 12" Tall Filter92 24" Tall Filter* Repalcement PartsBox 4 Filter Micron RatingBlank No Filterx 100 100 Micron B200x40 40 Micron B200x25 25 Micron B200x1 1 Micron B200WAWater AbsorbentFilterDP Disposable ElementBox 5 Oil Viscosity500 up to 500 cSt1000 500 to 1000 cStBox 6 PumpE ElectricP PneumaticBox 7 Voltage - Hertz - PhaseListBox 8NPTBSPQBox 9Pluming ConnectionNational Pipe ThreadBritish Standard PipeQuick CouplerConnection SizeList Size 1/2, 3/4, 1, 1 1/2, 2 "Box 10DPGFFGFSPCSPMSPBVOptionsDifferential PressureGaugeFluid Flow GaugeFlow SwitchParticle CounterSpecify Pump &Motor BrandSample PortIsolation Ball Valve9EL5040001 x25 or x40 - Replacement Element 25 or 40 Micron for 91 filter9EL5040401 x25 or x40 - Replacement Element 25 or 40 Micron for 92 filter9OR348 - End Cap O-Ring for both filters9OR351sq - Filter Mount Gasket for both filters9BPA5050001 - ByPass and Magnetic Filter for 91 Filter9BPA5050401- ByPass and Magnetic Filter for 92 Filter9ELWA5040001 - Water Absorbing filter for 91 filter9ELWA5040401 - Water Absorbing filter for 92 filterISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads27Sample Port (8KLFSP)Fluid Flow Gauge (8KLFFFG)Flow Switch (8KLFFS)Particle Counter (8KLFPC)Differential Pressure Gauge (8KLFDPG)


8000 Series High Flow Magnetic Filtration Systemfor Ferrous and Non-Ferrous ContaminationThe High Flow Magnetic Filtration Systemsare designed for Hydro Carbon Fluids, Chemical and Water.This system is designed to be installed inlineCustom designs and sizes are welcome!• 2” to 8” Inlet / Outlets: Flange, Threaded or Weld let• 5SC2P - 2” x 24” (50mm x 600mm) Magnetic Filter• High Strength Magnetic Patented Technology rated at 300°F - 150°C (600°F -300°C)• Cam Lock for easy cleaning• 2 - ADD-Vantage 9000 Filters mounted in parallel, construction with StainlessSteel elements 100% ReusableN E W !HOW TO ORDER...8HF2P - 92 - FLN - 3 - 24Scrubber8HF2P - Single 2” MF8HF2PD - Double 2” MFNumber of Filters92 - 2 Filters94 - 4 FiltersIn/Outlet Type Size HeightFLN - Flange 2 to 8 in 24" 60cmNPT - Pipe Thread 50 to 200mmWLD- WeldletBSP- British Thread* Quote per orderISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads28


ADD-Vantage 9000 SeriesImproves Environmental FootprintsPrimary Oil, Fuel & Hydraulic FiltersThe most advanced filtration technologyfor fluids and oils in the world.Traps ferrous& non-ferrouscontaminationdown tosubmicron levelswhich areanalyzed fora predictivemaintenanceprogram.ADD-Vantage 9000 Series is the combination of twofiltration technologies:• Reusable, stainless steel element• Patented magnetic filter technologyThe 9000 offers the most advanced filtration on themarket today; a reusable, easily cleaned, long lifeelement.• Replaces disposable filters, eliminates environmental taxesand used filter disposal costs• Installs just like a disposable filter, no retrofitting is required.Removal and inspection are easy with a built-in Femco ®compatible drain plug.• No other filter on the market can provide the significantsavings2 year payback, 10+ year effective life – and unsurpassedfiltering of the ADD-Vantage 9000 Primary FilterReplacement O-rings, Filter Element &Repair ComponentsWe carry a complete stockof replacement O-rings, filterelements, anti-drain backvalves, bypass valves andcomponents to repair damagedfilters.Check our web sitewww.OneEyeIndustries.comor contact us directly formore details.ApplicationsPrimary oil & fuel filter applications• Designed for heavy duty diesel trucks and large capacity dieselengine installations in all industries• Extend oil change intervals from 300 to 1000+ hours with oilanalysis• Removes ferrous and non-ferrous contaminants to sub-micronlevels reducing wear cycle on bearings, seals, heads and pistons• Reduces the scoring of fuel injectors increasing fuel economyHydraulics – primary & secondary filtration and suction &return line installations• Removes contaminants that prematurely wear pumps andseals• Maintains high ISO cleanliness levels, extending fluid life• Reduces corrosion• Amine & glycol• Compressor lube oil• TurbinesBenefits• Continuous total filtration of the most damaging contaminants(iron and steel) down to 1 micron.• Flows 40% more fluid than conventional elements• True filtration, no “channeling” or “worm holing”.• Filter elements easily clean in a parts washer or an ultrasoniccleaner, with solvent, or soap & water or the OEI Enviro WashStation (see page 34).• Also fits conventional paper and glass pack filters• Allows inspection of wear metals trapped on the magneticfilter rod and filter• Eliminates costs of filter stocking and used filter disposal• Eliminates environmental impact from disposal of used filters& oil and associated environmental taxes• 3 year full warranty, 10+ year effective life• Extend oil change intervals from 300 to 1000+ hours with oilanalysisSpecifications• High flow rate inlet, outlet & filter. Patented bypass andmagnetic filter rod.• 10, 25 & 40 micron, absolute rated, filter elements filter downto 5-7 microns before activating the bypass• Exceeds industry standards for filtration (ISO 4572), bypasslimitations, and collapse pressure (ISO 2941)• 316 stainless steel magnetic filter – continuously filters ferrousand non-ferrous contaminants (due to adhesion) tosub-micron levels• Industrial steel machined housing• Femco © drain compatible• Remote mounts, spare parts, o-rings and filter elements areall available• OEI's Stainless elements with integrated magnetic filter rod,available for Cat, Waukesha, Cummins and most other brandsThe ISO most 9000 advanced • Reusable filtration • 1 Year technology Warranty on for Pads fluids • 5 and Year oils Life in on the Pads world.29


ADD-Vantage 9000 SeriesHigh Flow Dual Filtration SystemThe “High Flow Dual Filtration System” is a combination of two filtrationtechnologies.1) Beta 200 rated reusable stainless steel element2) OEIs’ patented magnetic filter extracts and traps ferrous and non ferrouscontamination.The ability to remove non-ferrous contamination is through ferrous to non-ferrousabrasive contact and static adhesion.Employed on a custom OEI high flow filter mount base that allows up to 200 gallons aminute of flow.This filter is recommended for fuel and light viscous oils.Available in single and duplex configurations.9ADV9 - 266FF - NPT# - B# Inch In/OutletsNPT - National PipeBSP - British PipeFLN - FlangeWLD - WeldletMountB - Base MountI - InlineDimensions W x D x H Weight - lbs9ADV9 5 x 5 x 24 22Base 6 x 6 x 5.50 12Inline 5 x 5 x 5.50 7N E W !New Lube Oil and Fluid Dispenser FiltrationDesigned for filtering new fluids prior to dispensing in the following applications: Lube Oil – Hydraulic– Coolant – Fuel - etc. The ADD-Vantage 700 series is designed with two filtration systems in one, 1st astainless steel element providing maximum filtration protection, eliminating any chance of “worm holingor channelling” the element is reusable and available in 40, 25 or 10 micron β200 rating. The 2nd is ourpatented magnetic filter designed creating multiple independent radial magnetic fields filtering contaminantsto sub micron levels.The ADD-Vantage 700 is rated up to 700 psi and designed with 2” NPT in/outlets and available in a 15” or27” long unit.How to Order...9ADV9 – 700 - # - #Model Box 1 Box 29ADV9-700 27 25LengthBox 1 Filter Body Length15 15” - Long Body 400 Sq inch media27 27” - Long Body 850 sq inch media5.0"Box 2 Filter Micron Rating40 40 Micron Filtration B20025 25 Micron Filtration B20010 10 Micron Filtration B200www.OneEyeIndustries.com30


ADD-Vantage 9000 SeriesOEI Duplex Filtration System.Designed with OEI’s reusable dual filtration units thestainless steel elements can be removed for cleaningand the magnetic filter inspected for wear contaminantswhile your equipment continues to work.9ADV9 - D9L - PX - x25This duplex system is very versatile with multipleport option from ¾” NPTF to 2” NPTF or SAE 12 toSAE24.To Order ...9ADV9 - BOX1 – BOX2 - BOX3BOX 1Body LengthD9L – 12“ BodyD9XL – 24” BodyBOX 2ConnectionPB – 3/4” NPTFPC – 1” NPTFPD – 1 1/4” NPTFPE – 1 1/2” NPTFPF – 2” NPTFPM – 12 SAEPN – 16 SAEPO – 20 SAEPP – 24 SAEPX – Blank FlangeBOX 3Micron RatingX 25X 40X 80X 100Duplex SystemW x D x H9ADV9-D9L 12 ½” x 25” x 18”32mm x 64mm x 46mm9ADV9 - D9XL - PX - x259ADV9-D9XL 12 ½” x 25” x 30”32mm x 64mm x 76mmADD-Vantage 9000 WrenchPart # 1APSWThe ADD-Vantage 9000 Series bodies were designedto be held by an adjustable Pin Spanner Wrench whileremoving or installing the Element Cap.This tool is available at most tool supply companies.Description: Adjustable Pin Spanner WrenchMax Capacity: 6-1/4 "Diameter: 3/8"Pin Length: 1/4"Hook Size: 15.32"Length: 12-1/8"ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads31


ADD-Vantage 9000 SeriesDual Milling Filtration SystemA 100% Reusable Filtration System designed for themachining/milling industry. This ADD-Vantage 9000 (Milling)replaces all conventional disposable filters. Designed witha dual filtration system: Stainless Steel Element with 1/16”perf. screen to trap large particles and OEI’s PatentedMagnetic Filter will trap ferrous contaminants to sub-micronlevels. Extending the life of your coolant/cutting fluids andequipment. This filter is easily cleaned and has an effectivelife of 10+ years. A remote mount base is available in 1" and1-1/2" inlet/outlet. Continuously filters ferrous contaminantsto sub-micron levels9ADV9 - M - 24Filter SystemM - MillingG - GreaseLength12249RMHY5Remote Mount - Hydraulic1 1/2" In/OutletOther sizes availableADD-Vantage 9000 SeriesGrease Filtration System9ADV9 - G - 125YB1TXOEI has modified itsY-Strainers for smaller inlineapplication for filteringgrease. Equipped with OEIspatented Magnetic Filter,this system will trap ferrouscontaminants extendingthe life of your seals andbearings.5YB1TXG - 1” inlet/outlet5YB112TXG - 1½” inlet/outletDesigned to filter grease before it reaches your bearings.The ADD-Vantage 9000 (Grease) filter is equipped with OEI’s PatentedMagnetic Filter, trapping ferrous contaminants to sub-micron levels,extending the life of your seals and bearings. This filter is easily cleanedand has an effective life of 10+ years. Sold with a remote base mount,available with a 1" or 1-1/2" inlet/outlet.This system can be installed remotely on automatic greasing systemssuch as ATS Electro-Lube, Lincoln, Farval, etc.For smaller application, install OEI’s Magnetic Y-StrainerISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads32


N E W !Reusable ADD-Vantage Oil Filter 9000 Magnets Series9WSH-8THE ENVIRO-WASH 90009PWSH-###OEI introduces an environmentally friendly and cost effective cleaning system for stainless steel cloth mediafilter elements. The Enviro-Wash 9000 cleaning system is compact, mobile, user friendly and replaces the traditionalultrasonic cleaning systems.OEI’s biodegradable cleaning solution will remove carbon, soot, graphite, oils, tars, solvent based products,water repellent greases, waxes, grease, soils and protein deposits.The Enviro-Wash 9WSH-8 system is designed to clean all our stainless steel cloth media elements. The systemoperates as a soak and spray process that cycles in 30 minutes from dirty to clean elements and allows thecleaning of (2) 24” elements, (4) 12” elements or (8) 6” elements. The 20 litre envirowash cleaning solutionwill have a cleaning capacity of 900+ filter elements on average.The Enviro-Wash 9PWSH-### system is designed as an individual system to clean all our stainless steel clothmedia elements. The system operates as a soak and spray and air dry process.9WSH-8Envirowash 9WSH-8 includes• Mobile wash station 33”W x 25”D x 40”H• 4 - 20 litre pails of envirowash• 6 - Absorbent filter pads• (12) - Element storage bags for 12” elements• (12) - Element storage bags for 24” elementsEnvirowash 9000 Consumables• Envirowash solution – available in 20 litre pails• Absorbent filter pads• Element storage bagsWe carry all replacement parts for the Envirowash 9000.9PWSH-###9PWSH-318-elements 1” – 2.8” dia. up to 9”long, 1 Litre of cleaning solution required.9PWSH-418-elements with a 2.8” – 3.8” dia. upto 9” long, 2 Litre of cleaning solution required.9PWSH-436-elements with a 2.8” – 3.8” dia. upto 18” long, 4 Litre of cleaning solution required.9PWSH-620-elements with a 3.8 – 5.8” dia. upto 10” long, 4 Litre of cleaning solution required.9PWSH-648-elements with a 3.8” – 5.8” ”dia. upto 24” long, 8 Litre of cleaning solution requiredISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads33


Industrial Reusable Filtration Oil Filter Solutions MagnetsThe filters below are in production, please identify other filters required. Screens are available in 10, 25 & 40 microns.Please specify. Filters for other applications and equipment manufacturers are available on order request (John Deere, Volvo).ADD-VANTAGE 9000 REUSABLE FILTERS – FOR APPLICATION ON OIL FUELHYDRAULIC COOLANT SYSTEMS – Cleanable 316 Stainless Steel Element &Magnetic Filter & Internal Bypass – All machined steelConstruction. Custom orders for most disposable filter sizes3.625” OD Filter DimensionsEngine Adapters9ADV9-1000Primary Fuel Filter for most CAT/ Cummins / Detroit / Mac/Volvo / Mercedes9EA3010401 Engine Adapter 1” x 14 UN (BF 957)9SCG20Gasket 2.47” ID x 2.85” OD9ADV9-B260Engine Lube, Compressor Lube and Hydraulic Applications9EA3010202Engine Adapter 11/8” x 16 UN9SCG20Gasket 2.412” ID x 2.812” OD9ADV9-B262Engine Lube, Compressor Lube and Hydraulic Applications9EA3010201Engine Adapter 1” x 12 UN9SCG20Gasket 2.412” ID x 2.812” OD9ADV9-PH3976A Engine Lube, Compressor Lube and Hydraulic Applications9EA3010101Engine Adapter 1” x 16 UN9SCG20 Gasket 2.47” x 2.85”9ADV9-B237Engine Lube, Compressor Lube and Hydraulic Applications9EA3010301Engine Adapter 3/4" x 16 UN9SCG20Gasket 2.455” ID x 2.835” OD3.625” COMMON Filter Components9B3020201 Canister Body 3.625: x 7.5L9EC3030001Filter End Cap9BPA3050201Bypass & Magnetic Filter 73mm x 1Bar/w 25RNC5165259BPS3060001Bypass Coil Spring9OR218Filter Element O-Ring9OR236End Cap O-Ring9DP263750Drain Plug 3/4" x 16 SAE9CG263860 Drain Plug Gasket 3/4"9EL3040201S/S Filter Element4.25” OD Filter DimensionsEngine Adapters9ADV9-PH49ACAT/ Volvo/ Mack:CAT 1R0658, 1R0714, 1R0739 1R1807, 2P4004, 2Y80969EA4010301Engine Adapter 1 1/8” x 16 UN9SCG9Gasket 3.59” ID x 4.01” OD9ADV9-B7155Hitachi Excavators, Kobelco Wheel Loader9EA4010401Engine Adapter 1 1/2” x 16 UNGasket 3.875” ID x 4.315 OD9ADV9-PH3786 Ford / IHC Trucks w/ 7.3 Turbo Diesel (94-03)9EA4010201Engine Adapter 1 1/2” x 16 UNGasket 3.692 x 4.0112”9ADV9-0958K2000 Fuel Primary9EA5010203Engine Adapter 1 1/8" x 12 UN9SCG18Gasket 3.85" ID x 4.35 OD9ADV9-0959K2000 Fuel Secondary9EA5010204Engine Adapter 1 1/16" x 16 UN4.25” COMMON Filter Components9B4020001 Canister Body 4.25” OD x 9.90L9EC4030001Filter End Cap9BPA4050001Bypass & Magnetic Filter 94.5mm x 1Bar/w 25RNC51669BPS4060001Bypass Coil Spring9OR226Filter Element O-Ring9OR242End Cap O-Ring9DP263750Drain Plug 3/4" x 16 SAE9CG263860 Drain Plug Gasket 3/4"9EL4040101S/S Filter ElementISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads345.0” OD Filter DimensionsEngine Adapters9ADV9-0755 Cat 1R-07559EA5010202Engine Adapter 1 3/8” x 16 UN9SCG18Gasket 3.85” ID x 4.35” OD9ADV9-4005 Cat C15,C12, C10, C16, 3406, 34089EA5010201Engine Adapter 1 1/2 x 16 UN9SCG7Gasket 3.85” ID x 4.21” OD9ADV9-3566Cat 1R18089EA5010007Engine Adapter 1 1/2" x 16 UN9SCG18Gasket 3.845” ID x 4.35 OD9ADV9-3612Cummins K2000, Detroit Diesel9EA5010004Engine Adapter 1 1/16” x 16 UN9SCG10Gasket 3.64 ID x 4.31” OD9ADV9-3671Detroit Diesel 50,60 Series LF36719EA5010002Engine Adapter 1 5/8” x 12 UN9SCG18Gasket 3.845” ID x 4.35 OD9ADV9-0495Detroit Diesel 50, 60 Series Power Guard B4959EA5010001Engine Adapter 1 5/8” x 12 UN9SGC10Gasket 3.64” ID x 4.31” OD9ADV9-3555Cat, Cummins, Volvo. IHC, John Deere, P3555A9EA5010005Engine Adapter 1 3/8” x 16 UN9SCG7Gasket 3.85” ID x 4.21” OD9ADV9-7138 IHC, Detroit Series 409EA5010006 Engine Adapter 36mm x 1.59SCG10Gasket 3.64” ID x 4.31” OD9ADV9-3000N14 Cummins9EA5010101Engine Adapter 2 1/4" x 12 UN9SCG3Gasket 4.06” ID x 4.58” OD9ADV9-9001Cummins ISX, ISB, ISC, ISM9EA5010003 Engine Adapter 95mm x 2.59SCG8Gasket 4.11” ID x 4.31” OD9ADV9-9024Cummins QSK609EA5010010 Engine Adapter 90mm x 2.0Gasket 4.0” x 4.68” OD5.0”OD COMMON Filter Components9B5020101Canister Body N149B5020001Canister Body 5” OD x 12 5/8” L9B5020202Canister Body 5” OD x 9 7/8” L9EL5040001S/S Filter Element for 12 5/8” Body & N149EL5040002S/S Filter Element for 9 7/8” Body9BPA5050001Bypass & Magnetic Filter (25RNC387) 12 5/8 Body9BPA5050002Bypass & Magnetic Filter (25RNC3845) 9 7/8 Body9BPS5060001Bypass Coil Spring9OR230Filter Element O-Ring9OR348End Cap O-Ring9DP263750Drain Plug 3/4" x 16 SAE9CG263860 Drain Plug Gasket 3/4"9EL4040001S/S Filter Element9EC4030001Filter End Cap


ADD-Vantage 9000 SeriesADD-Vantage 9000 Hydraulic Filter9ADV9-926170 Short Version9B5020002Canister Body 5” OD x 9 7/8” L9EL5040002S/S Filter Element 25 Micron 4.17 OD x 2.83” ID x 7.00” L9BPA5050002 Bypass & Magnetic Filter 1 Bar – 25RNC384.759ADV9-926170L Standard9B5020001Canister Body 5” OD x 12 5/8” L9EL5040001S/S Filter Element 25 Micron 4.17” OD x 2.83” ID x 9.73” L9BPA5050001 Bypass & Magnetic Filter 1 Bar – 25RNC3879ADV9-926170LX2 Long Version9B5020401Canister Body 5” OD x 24” L9EL5040401-B S/S Filter Element 25/40 Micron 4” OD x 2.83” ID x 21.6” L9BPA5050401 Bypass & Magnetic Filter 1 Bar – 25RNC38199ADV9-266-FF High Flow Filter9EA61010Mount Adapter w/2” Flange9B5020401Canister Body 5” OD x 24” L9EL5040401-B S/S Filter Element 25/40 Micron 4” OD x 2.83” ID x 21.6” L9BPA5050401 Bypass & Magnetic Filter 1 Bar – 25RNC3819Common Filter Components9EA5010008Mount Adapter 1 1/2" x 16 UN9BPS5060001 Bypass Coil Spring9EC5030001Filter End Cap9OR230Filter Element O-Ring9OR348End Cap O-Ring9DP263750Drain Plug 3/4" x 16 SAE9CG263860 Copper Gasket 3/4”ADD-Vantage 9000 Milling Filter9ADV9-M-129B5020001 Canister Body 12 5/8”9EL5040003S/S Filter 1/8” Perf. 4.17 OD x 2.83 ID x 9.7 L9BPA5050001 Bypass & Magnetic Filter 1 Bar – 25RNC3879ADV9-M-249B5020401 Canister Body 24”9EL5040004S/S Filter 1/8” Perf. 4.17 OD x 2.83 ID x 19.5 L9BPA5050401 Bypass & Magnetic Filter 1 Bar – 25RNC3819Common Filter Components9EA5010008Mount Adapter 1 1/2" x 16 UN9BPS5060001 Bypass Coil Spring9EC5030001Filter End Cap9OR230Filter Element O-Ring9OR348End Cap O-Ring9DP263750Drain Plug 3/4" x 16 SAEN E W !9CG263860 Copper Gasket 3/4”ADD-Vantage 9000 Grease Filter9ADV9-G-129EA5003901Mount Adapter 1 1/2” x 16 UN w/ Solid Element9B5020001Canister Body 5” OD x 12 5/8” L9EC50300003 End Cap w/ 3R8 Magnetic Filter9OR348End Cap O-Ring9000 SERIES REMOTE FILTER BASE MOUNT9RM3000 Base Mount for 9ADV9-3000 N-199RM36129RMHY59RM266Base Mount for 9ADV9-3612Base Mount for 9ADV9-926170LBase Mount for High Filtration SystemSTAINLESS STEEL REPLACEMENT ELEMENTS – Lube and HydraulicApplications Custom element sizes are available. – All OEI elements comewith magnetic filters – Replace OEM Disposable Elements with OEI StainlessSteel Elements.9ELSS96008259ELSS96008409ELSS960016259ELSS960016409ELSS98008259ELSS98008409ELSS980016259ELSS98001640Stainless Element 25 Micron Absolute/10 micron Nominal 8" LStainless Element 40 Micron Absolute/10 micron Nominal 8" LStainless Element 25 Micron Absolute/10 micron Nominal 16" LStainless Element 40 Micron Absolute/10 micron Nominal 16" LStainless Element 25 Micron Absolute/10 micron Nominal 8" LStainless Element 40 Micron Absolute/10 micron Nominal 16" LStainless Element 25 Micron Absolute/10 micron Nominal 8" LStainless Element 40 Micron Absolute/10 micron Nominal 16" LSTAINLESS STEEL SUCTION STRAINERS – Stainless Steel Suction Strainers w/magnetic filter9ELSSSSNPT389ELSSSSNPT129ELSSSSNPT349ELSSSSNPT1009ELSSSSNPT114S/S Suction Strainer 3/8" NPT 1.80" OD X 3.50" LS/S Suction Strainer 1/2" NPT 1.80" OD X 4.20" LS/S Suction Strainer 3/4" NPT 2.60" OD X 4.10" LS/S Suction Strainer 1" NPT 2.60" OD X 5.50" LS/S Suction Strainer 1-1/4" NPT 3.40" OD X 7.70" L9ELSSSSNPT112 S/S Suction Strainer 1-1/2" NPT 3.40" OD X 8.90 "L9ELSSSSNPT2009ELSSSSNPT2129ELSSSSNPT3009ELDP30402019ELDP40401019ELDP50400029ELDP50400019ELWA50400019ELWA50400029ELWR5040401S/S Suction Strainer 2" NPT 3.40" OD X 10.0" LS/S Suction Strainer 2-1/2" NPT 5.90" OD X 8.40" LS/S Suction Strainer 3" NPT 5.90" OD X 10.7" LADD-Vantage 9000 Disposable CELLULOSE ElementsFilter Element 2.76"od x 1.6"id x 6.69"L 10 Micron NominalFilter Element 3.54"od x 2.28"id x 7.48"L 10 Micron NominalFilter Element 4.17" od x 2.83" id x 7.0 L 10 Micron NominalFilter Element 4.17"ood x 2.83"id x 9.73"L 10 Micron NominalFilter Element 4.17"ood x 2.83"id x 9.73"L Water AbsorbingFilter Element 4.17" od x 2.83" id x 7.0 L Water AbsorbingFilter Element 4.00"ood x 2.83"id x 21.6"L Water AbsorbingISO ISO 9000 • To • Reusable order any • 1 other Year parts Warranty not listed on Pads above, • 5 Year please Life contact Pads us.35


Reusable ADD-Vantage Oil Filter 9000 Magnets SeriesCAT Filters Threading Dimension GasketADD-Vantage 9000Reusable/Cleanable077-3058 1 1/2 x 16 5 x 7 none 9ADV9-926170077-3492 1 x 12 3 x 5 2.81 - 2.42 9ADV9-B262093-7521 1 1/8 X 16 4 X 7 2.83 - 2.46 9ADV9-B260102-2828 1 3/8 x 12 4 x 9 2.76 - 2.48 9ADV9-8878108-1153 1 3/4 x 12 11.63 L X 4.77 3.39 - 3.11 9ADV9-0973121-9868 1 3/8 X 12 4 X 6 2.76 - 2.48 9ADV9-8878126-1813 2 x 12 9.52 L X 3.13 3.13 - 1.86 9ADV9-1814126-1814 2 x 12 9.52 L X 3.13 3.13 - 1.86 9ADV9-1814126-1815 1 3/8 X 12 4 X 6 2.76 - 2.48 9ADV9-8878126-1816 1 3/4 x 12 5 x 8 3.34 - 3.13 9ADV9-6636126-1817 1 3/4 x 12 5 x 12 3.39 - 3.11 9ADV9-0973126-1818 1 3/8 x 12 4.7 x 11.6 2.76 - 2.48 9ADV9-8878129-0373 1 X 14 4.25 X 11.3 3.5 - 3.18 9ADV9-0373130-3212 2 x 12 3 x 9 3.13 - 1.86 9ADV9-1814133-5673 1 X 14 4.25 X 11.3 3.5 - 3.18 9ADV9-0373134-3014 1 3/4 x 12 5 x 12 3.35 - 3.11 9ADV9-0973144-0832 1 1/2 x 16 5 x 7 none 9ADV9-926170144-6691 1 3/8 X 12 4 X 6 2.76 - 2.48 9ADV9-8878152-6902 1 3/4 x 12 5 x 14 3.34 - 3.11 9ADV9-0973156-0214 1 3/8 x 12 4 x 9 2.76 - 2.48 9ADV9-8878185-0337 2 X 12 3 X 9 3.13 - 1.86 9ADV9-1814198-3188 1 1/2 x 16 5 x 11 none 9ADV9-926170L937-521 1 1/8 x 16 3.69 x 5.2 2.81 - 2.42 9ADV9-B2601G-8878 1 3/8 x 12 4 x 9 2.76 - 2.48 9ADV9-88781P-2299 1 x 14 3.65 x 7 2.81 - 2.42 9ADV9-10001R-0658 1 1/8 - 16 4.25 x 10.3 3.89 - 3.55 9ADV9-PH49A1R-0712 1 x 14 9.43L X 3.72" 2.81 - 2.42 9ADV9-10001R-0713 1 1/8 - 16 3.69 x 5.2 2.81 - 2.42 9ADV9-B2601R-0714 1 1/8 - 16 4.28 x 6 3.97 - 3.59 9ADV9-PH49A1R-0716 1 1/2 -16 5.3 x 12 4.31 - 3.92 9ADV9-40051R-0734 1 X 12 5.35L X 3.66 2.81 - 2.42 9ADV9-B2621R-0739 1 1/8 x 16 4.282 x 10.3 3.96 - 3.58 9ADV9-PH49A1R-0749 1 x 14 3.68 x 9.5 2.83 - 2.46 9ADV9-10001R-0750 1 x 14 3.68 x 7 2.83 - 2.46 9ADV9-10001R-0751 7/8 X 14 3.1 X 7.0 2.5 - 2.25 9ADV9-07511R-0755 1 3/8 x 16 5.3 x 12 4.28 - 3.9 9ADV9-07551R-0762 1 X 14 3.7 - 10.75 3.6 - 3.03 9ADV9-07621R-0769 1 X 14 4.24 X 9.90 4.25 - 3.68 9ADV9-07691R-0771 1 X 14 4.25 X 9.37 4.24 - 3.68 9ADV9-07691R-1807 1 1/8 x16 4 x 10.38 3.97 - 3.59 9ADV9-PH49A1R-1808 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-35661W-2660 1 1/2 x16 5.3 x 12 4.31 - 3.92 9ADV9-35661W-8845 1 3/8 x 16 4.66 x 9.75 4.32 - 3.85 9ADV9-0755207-5035 1 3/4 x 12 5 x 14 3.34 - 3.11 9ADV9-0973223-7809 1 1/2 x 16 5 x 7 none 9ADV9-926170225-4118 1 3/4 x 12 5 x 12 3.38 - 3.10 9ADV9-0973ISO ISO 9000 9000 • To • Reusable order any • 1 other Year items Warranty not listed on Pads above, • 5 Year please Life contact Pads us.36


Reusable ADD-Vantage Oil Filter 9000 Magnets SeriesCAT Filters Threading Dimension GasketADD-Vantage 9000Reusable/Cleanable244-4484 1 1/2 x16 4.65 x 11.73 4.32 - 3.85 9ADV9-3566272-1788 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-4005275-2604 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-40052P-4004 1 1/8 - 16 4.25 X 10.3 3.89 - 3.55 9ADV9-PH49A2P-4005 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-40052Y-8096 1 1/8x 16 4.25 x 10.3 3.89 - 3.55 9ADV9-PH49A2Y-8097 1 1/2 x16 5.3 x 12 4.31 - 3.92 9ADV9-40052Y-8670 1 x 14 3.66 x 6.85 2.81 - 2.42 9ADV9-1000326-1643 1 X 14 4.25 x 9.3 4.25 -3.85 9ADV9-1643326-1644 1 x 14 4.25 x 7.6 4.25 - 3.7 9ADV9-16434I-3948 2 x 12 3 x 9 3.13 - 1.86 9ADV9-18144I-3950 2 x 12 3 x 9 3.13 - 1.86 9ADV9-18144T-6788 1 1/2 x 16 5 x 7 none 9ADV9-9261704T-6915 1 1/8 X16 4 X 6 2.72 - 2.41 9ADV9-B2607W-2326 3/4 x 16 3.81 x 6.78 2.82 - 2.42 9ADV9-B2377W-2327 3/4 x 16 3.66 x 5.35 2.81 - 2.41 9ADV9-B2379N-5570 1 1/8 x 16 3.81 x 5.22 2.81 - 2.42 9ADV9-B2379N-6007 1 1/8 x 16 4.28 x 5.78 3.97 - 3.59 9ADV9-PH37869T-0973 1 3/4 x 12 11.63L X 4.77 3.39 - 3.11 9ADV9-09739T-6636 1 3/4 x 12 5 x 8 3.34 - 3.13 9ADV9-66369T-8578 1 1/2 x 16 5 x 7 none 9ADV9-9261709U-5870 1 1/2 x 16 5 x 11 none 9ADV9-926170L9U-6983 1 1/2 x 16 5 x 11 none 9ADV9-926170L9U-6984 1 1/2 x 16 5 x 11 none 9ADV9-926170L9U-6985 1 1/2 x 16 5 x 11 none 9ADV9-926170LCAT Filters Element DimensionADD-Vantage 9000Reusable/Cleanable054-1719 element 9.02L X 1.61 X 3.85 9ELSSK409X25077-5479 element 9.02L X 1.61 X 3.85 9ELSSK409X25086-3940 element 9.02L X 1.61 X 3.85 9ELSSK409X25094-4412 element 17.7L x 5.8 x 4.3 9ELSS5818x40132-8875 element 9.25L x 4.0 x 2.27 9ELSS773X40132-8876 element 9.0L x 5.07 x 3.34 9ELSS778X40134-0964 element 8.03L 3.1 X 1.71 9ELSS96008X25139-1536 element 11 X 5.07 X 3.34 REVERSE FLOW 9ELSS722X40139-1537 element 7.0 X 5 1/8 X 3 3/8 9ELSS5077X25167-2009 element 9.0 X 6.84 X 3.94 9ELSS709X40179-9806 element 16 3/4 X 5 5/8 X 3 7/8 9ELSS9806X25249-2337 element 9.0 X 6.75 X 4.25 REVERSE FLOW 9ELSS7409X25328-3655 element 10.5 X 5.0 X 2.0 9ELSS1809X251M-9156 element 9.25L x 4.0 x 2.27 9ELSS773X251R-0719 element 9.25L x 4.0 x 2.27 9ELSS773X401R-0722 element 11 X 5.07 X 3.34 9ELSS722X40ISO ISO 9000 9000 • To • Reusable order any • 1 other Year items Warranty not listed on Pads above, • 5 Year please Life contact Pads us.37


Reusable Scrubber Oil Flow Filter Rates MagnetsScrubberModel 5SC349SCL 5SC12SCL 5SC24SCL 5SC36SCL 5SC212SCL 5SC224SCLViscosities BasecSt @ 40CWater, CoolantDeisel Fuel (1 - 30 St)Single Pass Filtration GPM 8 21 40 60 50 98Multi Pass Filtration 30 81 95 122 200 400Engine, Gear andHydraulic Oil / cStSAE 10 (40 - 110 cSt)Single Pass Filtration GPM 7 20 38 55 50 98Multi Pass Filtration 30 65 80 90 190 380SAE 20 (220 cSt)Single Pass Filtration GPM 6 15 30 45 40 70Multi Pass Filtration 15 41 76 75 133 200SAE 30 (460 cSt)Single Pass Filtration GPM 5 12 20 25 25 40Multi Pass Filtration 10 25 30 35 65 95SAE 40 (680 cSt)Single Pass Filtration GPM 3 6 10 12 12 20Multi Pass Filtration 5 13 16 20 40 65Gear Oil (1000 cSt)Single Pass Filtration GPM 0 3 5 6 8 15Multi Pass Filtration 0 5 8 11 22 40ISO 9000 • Reusable www.OneEyeIndustries.com• 1 Year Warranty on Pads • 5 Year Life on Pads39

More magazines by this user
Similar magazines