300, 400 & 500 - Rapid Granulator

Blow mouldingBlow-moulding waste such as diverse plastic bottles,larger containers – including large water containers,jerry cans, etc. – and big barrels are typical in this applicationsegment. These are quickly turned into highqualityregrind that can be recycled directly to themoulding machine by the Rapid open-hearted family.A combination of double scissor-cut action andthe super-tangential cutterhouse optimizes gripping ofbulky products and minimizes the fl y-back of material.The result is smooth continuous granulation. There isno need for precutting bulky items, and the granulatorsare compact enough to be fed at chest height.All these benefi ts emphasize the importance of integratinga Rapid granulator for direct recycling as animportant unit of your production line.Configuration of cutterhouse ■ ■ ■The supertangential infeed gives Rapid granulators the huge grip neededfor bulky items and preventing parts from “dancing” on the rotor.Supertangential for bulk wasteThe two fi xed knives as shown (red) are typicallyused. A third fi xed knife (green) is optional in theRapid 500 Series for higher capacities.Tangential for thicker walled materialThe two fi xed knives as shown (red) are standardconfi guration. A third fi xed knife (yellow) is optionalfor higher capacities. The Rapid 500 Series caneven be set up with a fourth (green).