STARRETT-WEBBER GAGE BLOCKS - JW Donchin CO.

STARRETT-WEBBERGAGE BLOCKSHeavy-Duty – Inch System Accessories (continued)Indicator Accessory SetThis heavy-duty accessory mounts onany build-up of heavy-duty blocks andmeasures the deviation of the work fromnominal or desired size. (Indicator is setand checked for zero by placing blockson any known flat surface.)HDA 10 and HDA 12 Indicator AccessorySets consist of a holding block, extensionjaw and a precision Starrett indicator. Seecatalog description below for indicatorranges and graduations.Inch• •Above: Eccentric clamps are used for combining long blocks.Below: Quick-acting clamps are used for combining fractional inch blocks with blocks 1 or longer.Left: Indicator Accessory Set.Wear Blockscroblox ® Wear Blocks in .050 and.100 sizes are available for use withheavy-duty blocks.SizeCatalog No..050 HDC .050 WA1.100 HDC .100 WA1Heavy-Duty Steel Accessories Individually or Sets as stated belowIndividual AccessoriesNo. of Steel Accessories IncludedAll 42 thru 46 Piece Sets or 84 PieceDescription Catalog No. Set when ordered with AccessoriesHalf-Round Jaw*.500 Radius HDA 1. 2Scriber Point HDA 2. 1Center Point, .500 C/L HDA 3. 1Eccentric Clamp HDA 4. (See set description next page for qty.)Quick-Acting Clamp HDA 5. 1Base Block 1.500 Thick HDA 6. 1Additional AccessoriesStraight Jaw*1.000 Thick HDA 820.Indicator Set Consisting of IndicatorHolding Block, Extension Jaw(1.000 Thick), Indicator with±.010 Range .0005 Graduations,and Case HDA 10.Indicator Set As Above ExceptIndicator With ±.0015 Range.00005 Graduations HDA 12.*Jaws are normally used in pairs, but are ordered individually. Please order accordingly.461