DYNA® - Harley - Davidson Brno

A. PROFILE LOW FRONT SUSPENSION –FXDF MODELSC. PROFILE LOW REAR SHOCK KITACEB. PROFILE LOW FRONT SUSPENSION –FXDWG MODELSD. PREMIUM PROFILE LOWREAR SUSPENSION KITBDFDYNA ® 177SuspensionA. PROFILE ® LOW FRONT SUSPENSION* – FXDFDesigned by Harley-Davidson ® to lower the front fork approximately1" while preserving ride quality. Springs are wound toallow a compliant, yet controlled ride. Kit includes two forksprings, two damper tubes and two fork tube plug oil seals.54676-09Fits ’08-later FXDF models. Stock on FXDFSE/2 models.B. PROFILE ® LOW FRONT SUSPENSION* – FXDWGDesigned by Harley-Davidson to lower the front fork approximately1" while preserving ride quality. Springs are progressivelywound for a compliant, yet controlled ride. Mustonly be installed on vehicles equipped with low-profilerear suspension.54621-05Fits ’00-later FXST, FXSTB and FXSTC models equipped withProfile Low Rear Suspension P/N 54648-00A, 54665-03,54651-05A, 54652-05 or Rear Lowering Kit P/N 54001-04A.Also fits ’00-’05 FXDWG models equipped with Low RearShock Kit P/N 54594-03 or Premium Billet Profile Low RearSuspension P/N 54592-03.C. PROFILE LOW REAR SHOCK KIT*Plant your feet firmly on the ground. This reduced lengthversion of the Original Equipment rear suspension lowersthe seat height by approximately 1". Shocks feature chromeplatedsprings and body caps and suspension preload isadjustable for rider and passenger load.54625-06 ††Fits ’06-’09 FXD, FXDC and FXDWG models. (Lowers’06-’09 FXDL, ’08-’09 FXDF and FXDB models 1/4".) Does notlower ’10-later Dyna ® models.54594-03Fits ’93-’05 FXD, FXDL, FXDC and FXDWG models. Does notlower ’01-’05 FXDL models.D. PREMIUM PROFILE LOW REAR SUSPENSION KIT*Introduced on the ’08 FXDF model, these custom rear shockslower your bike while they raise the level of style. These lowprofileshocks lower the seat height by approximately 1". Therear shock and spring is completely covered with mirrorpolishedand chrome-plated sleeves for a sleek, beefy look.54619-08Fits ’07-later FXD, FXDC and FXDWG models. Stock on’08-later FXDF. Fits but does not lower ’07-later FXDL, FXDBand ’10-later FXD, FXDC and FXDWG models. ’07 Dyna ®models require separate purchase of Chrome Belt Guard KitP/N 60633-08. Does not fit with Detachable SaddlebagsP/N 90181-08.E. CUSTOM FORK BRACEThis chrome-plated fork brace adds style to the front end.46097-98Fits ’93-’05 FXDWG and ’84-later FX Softail ® models (exceptSpringer ® , FXCW/C and FXSTD). (Will not fit with ChromeLower Fork Sliders.)F. SCREAMIN’ EAGLE ® CHROME FORK BRACEThese Chrome Fork Braces are machined from billet aluminum,then polished and chrome-plated to complement thecurve of the front fender. The machined Screamin’ Eagle logofinishes the look with crisp detail. Easy-to-install, these bracesoffer increased torsional rigidity.46595-06AFits ’06-later Dyna models (except FXDWG, FXDF, FXDFSE/2and FXDSE/2) and ’02-later VRSCA, VRSCB, VRSCD andVRSCX models.46192-99AFits ’87-later XL (except XL883N, XL1200N, XL1200X and ’11XL883L), ’91-’05 Dyna (except FXDWG) and FXR models(except FXRT) with 39mm front forks. Will not fit withChrome Fork Sliders.††*WARNING: Installation of any accessory suspensioncomponents may affect cornering clearance and jiffystand operation. This could distract the rider, causingloss of control and death or serious injury.E. CUSTOM FORK BRACEF. SCREAMIN’ EAGLE CHROME FORK BRACE*WARNING: The Profile ® Low Front Spring Kit cannot beused independently and must be used with the appropriateProfile Rear Shock Lowering Kit. Installation of anyaccessory suspension components may affect corneringclearance and jiffy stand operation. This could distract therider, causing loss of control and death or serious injury.