DYNA® - Harley - Davidson Brno

GHDYNA ® 181Hand ControlsG. BILLET BRAKE LINE CLIPIt’s the details that count. Replace the Original Equipmentblack brake line clamp with this beautifully chrome-platedbillet aluminum clip. Sized for Original Equipment or braidedbrake lines, these “ball-milled” clips mount in the factory positionfor easy installation. Kit includes chrome-plated mountinghardware.91336-03Fits ’00-’07 FXST, FXSTB, FXSTC, FXSTD and FXDWG modelsequipped with Original Equipment brake lines.91364-03Fits ’00-later FXST, FXSTB, FXSTC, FXSTD and FXDWGmodels equipped with Harley-Davidson ® Braided Brake Lines.Also fits ’08-later FXST, FXSTB, FXSTC and FXDWG withOriginal Equipment brake lines.91369-03Fits ’00-later XL and Dyna ® (except FXDWG) modelsequipped with Harley-Davidson Braided Brake Lines.Also fits ’08-later Dyna models (except FXDWG) withOriginal Equipment brake lines.G. BILLET BRAKE LINE CLIPIH. BILLET CLUTCH CABLEADJUSTER DUST COVERJH. BILLET CLUTCH CABLE ADJUSTER DUST COVERReplace the black rubber clutch cable boot with brilliantchrome. Machined from billet aluminum, this two-piece“ball-milled” dust cover offers a striking contrast to OriginalEquipment black cables and a natural finishing touchwhen installing a braided clutch cable. Easy-to-install withincluded hardware.64108-03Fits ’00-later XL, Dyna ® and Softail ® models (exceptFLSTSE/2). ’00-’03 XL models require installation of ClutchCable Clamp P/N 91147-02 and ’04-later XL modelsrequire installation of Clutch Cable Clamp P/N 91249-04(sold separately).I. CHROME BILLET CLUTCH CABLE CLAMPThe perfect addition to braided or stock black clutch cables.This Clutch Cable Clamp is machined from aluminum billetand polished and plated for a lasting shine. The clamp isdesigned to grip the cable and the frame down tube, adding acustom look to the front of your cycle.38804-07Fits models with 1-1/2" diameter front frame down tube.Fits ’06-later Dyna ® models. Stock on FXDSE andFXDFSE/2 models.91147-02Fits models with 1-1/4" diameter front frame down tube(except Touring, ’04-later XL, ’08-later XR, ’06-later Dynaand ’11 Softail models with ABS).I. CHROME BILLET CLUTCH CABLE CLAMPJ. CHROME THROTTLE CABLE CLIPJ. CHROME THROTTLE CABLE CLIPTie up the loose ends to complete your custom ride. Whenmatched to Original Equipment black cables or availablebraided cables, these chrome-plated clips link the throttle/idle cables with brilliant chrome.91274-04Fits ’84-later models (except ’08-later Touring).KLK. POLYURETHANE HANDLEBAR RISER BUSHINGSThese Handlebar Riser Bushings replace the OriginalEquipment stacked rubber and zinc washer combination witha molded one-piece polyurethane bushing and chrome cover.The long-lasting bushing can reduce handlebar vibration andthe chrome cover adds a bright finishing touch.56165-03Fits ’97-’03 XL, ’86-later Dyna ® (except FXDB) and Softail ®(except Springer ® and FXSTD) models. ’86-’93 FL Softailmodels require use of ’94-later Riser Bolts. Will not fit withChrome Riser Cup Washer Kit P/N 56486-01.L. REDUCED EFFORT CLUTCH KITKit includes a new clutch spring and inner/outer ramps thatsignificantly reduce clutch lever effort. Original Equipment on’06-later Twin Cam-equipped models.36808-05Fits ’99-’05 Twin Cam-equipped models. Stock on ’06-laterTwin Cam-equipped models. This kit is not compatible withScreamin’ Eagle ® Performance Parts.K. POLYURETHANE HANDLEBARRISER BUSHINGSL. REDUCED EFFORT CLUTCH KIT