X M P i - TEST-THERM Sp. z oo
X M P i - TEST-THERM Sp. z oo
X M P i - TEST-THERM Sp. z oo
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
XMP iPrecision Pressure Transmitterfor Process, Chemical andPetrochemical Industry► Ex-intrinsically safe version withHART ® -communication► internal or flush weldeddiaphragm► rugged aluminium die cast caseor stainless steel field housing► nominal pressure ranges from0 … 350 mbar up to 0 … 600 barDESIGNThe basis of XMP i is our piezoresistivesilicon sensor DSP 111 (flush-welded diaphragm)or the sensor DSP 411 (internalmounting diaphragm).The sensor is – together with digital compensationelectronics – directly mountedinto the pressure port. It is connected tothe configurable HART ® module via a I 2 Cinterface.With the help of this innovative housingconcept, precise and long-term stablepressure transmitters with flush-weldeddiaphragm and low thermal error can beproduced.OPERATINGThe device is as a standard equipped withHART ® communication. It is thus possibleto set and transfer a variety of parametersvia PC, HART ® communicator, etc.An intelligent display and operating moduleis optionally available. Thus, the currentpressure can be displayed and thetransmitter can be easily configured onsitevia three buttons.Characteristics► accuracy:0.05 % FSO BFSL(0.1 FSO IEC 60770)► turn-down 1:10► several process connections:- thread (inch, NPT)- flange (DIN 2501, ANSI)- DRD► high ingress protection IP 67► optionally:- with integrated display andoperating module- c<strong>oo</strong>ling element for mediatemperatures up to 300 °C- flamepr<strong>oo</strong>f enclosure(in preparation)- PROFIBUS PA(in preparation)XMP iPrecision Pressure TransmitterBD SENSORS GmbHBD-Sensors-Straße 1 Telefon +49 (0) 92 35 / 98 11- 0 www.bdsensors.comD - 95199 Thierstein Telefax +49 (0) 92 35 / 98 11- 11 info@bdsensors.de
XMP iPrecision Pressure TransmitterTechnical DataExplosion protection (approval AX12-XMP i)Standard:aluminium die cast case: zone 0: II 1 G EEx ia IIB T4intrinsically safe version stainless steel field housing: zone 0: II 1 G EEx ia IIC T4Option:explosion pr<strong>oo</strong>f housingin preparationSafety technical maximumvaluesU i= 28 V, I i= 93 mA, P i= 660 mWPermissible temperatures forenvironmentin zone 0: -20 ... 60 °C with patm 0.8 bar up to 1.1 barin zone 1: -20 ... 70 °CConnecting cables(by factory)capacitance: signal line/shield also signal line/signal line: 160 pF/minductance: signal line/shield also signal line/signal line: 1 µH/mMiscellaneousDisplay (optionally)LC-display, visible range 32.5 x 22.5 mm; 5-digit 7-segment main display, digit height 8 mm,range of indication ±9999; 8-digit 14-segment additional display, digit height 5 mm;52-segement bargraph; accuracy 0.1% ± 1 digitIngress protection IP 67Installation positionany (standard calibration in a vertical position with the pressure port connection down;differing installation position have to be specified in the order)Weightmin. 400 g (depending on housing and mechanical connection)Operational life> 100 x 10 6 pressure cyclesWiring diagramPSupply +V SISupply –Pin configurationElectrical connectionsSupply +Supply –TestGroundaluminium die cast case:terminal clamps(clamp section: 2.5 mm 2 )IN+IN-Teststainless steel field housing:terminal clamps(clamp section: 1.5 mm 2 )IN+IN--Housing designs 7 (dimensions in mm)aluminium die cast case**stainless steel field housingM20x1.5(for cable-∅5 up to 14 mm)*M16x1.5(for cable-∅4 up to 11 mm)** without display and operating module marked dimensions decrease by 19 mm (with aluminium die cast case) orby 23.5 (with stainless steel field housing)7aluminium die cast case is horizontally rotatable as standardwww.bdsensors.com
XMP iPrecision Pressure TransmitterTechnical DataStandard pressure ports (dimensions in mm)sealG1/2“ DIN 3852 G1/2“ flush (DIN 3852) 8 G1/2“ EN 837 1/2“ NPTM20x1.5 with pressure ranges > 40 bar the length increases by 6 mm8not possible for vacuum and nominal pressure ranges > 35 barProcess connections up to 35 bar (dimensions in mm)Inch thread (DIN 3852) DRD 9diaphragm ∅45G1“ flushFlange 10 (DIN 2501)Flange 10 (ANSI B16.5)910flush diaphragm ∅Edimensions in mmsize DN25/PN40 DN50/PN40 DN80/PN16D 115 165 200E 30 89 89k 85 125 160b 18 20 20n 4 4 8d 14 18 18C<strong>oo</strong>ling elementtemperature range 150° C 300° Csize A 22 34number of c<strong>oo</strong>ling fins 2 3mounting flange is included in the delivery (already pre-assembled)DN80/PN16, 2"/150 lbs and 3"/150 lbs only possible for nominal pressure ranges P N≤ 7 barflush diaphragm ∅Edimensions in mmsize 2"/150 lbs 3"/150 lbsD 152.4 190.5E 86 89g 91.9 127k 120.7 152.4b 19.1 23.9n 4 4d 19.1 19.1HART ® is a registered trade mark of HART Communication Foundation; Hastelloy ® is a brand name of Haynes International Inc.Windows ® is a registered trade mark of Microsoft CorporationThis data sheet contains product specification, properties are not guaranteed. Subject to change without notice.SAP106866_E_010108Telefon +49 (0) 92 35 / 98 11- 0pressure Telefax +49 (0) measurement92 35 / 98 11- 11www.bdsensors.cominfo@bdsensors.de
Fax: +49 (0) 92 35 / 98 11 -11Ordering code XMP iXMP i- - - - - - - - - -Pressuregauge 5 1 1absolute 1 5 1 2Input[bar]0 ... 0,35 1 3 5 0 00 ... 1 1 0 0 10 ... 2 2 0 0 10 ... 7 7 0 0 10 ... 17 1 7 0 20 ... 35 3 5 0 20 ... 70 7 0 0 20 ... 170 1 7 0 30 ... 350 3 5 0 30 ... 600 6 0 0 3-0,17 … 0,17 S 1 7 0-0,35 … 0,35 S 3 5 0-1 … 1 S 1 0 2-1 ... 2 V 2 0 2-1 … 7 V 7 0 2customer 9 9 9 9 on requestDesignAluminium die cast casewith displaywithout displayA 0A NStainless steel field housingwith displaywithout displaycustomerF VF N9 9 on requestOutputIntrinsic safety 4 … 20 mA / 2-wirewith HART ® -communicationcustomerI9 on requestAccuracy0.1 % 1Electrical connectionterminal clampcustomerA K 09 9 9 on requestMechanical connectionStandard pressure connectionsG1/2" DIN 38521 0 0G1/2" DIN 3852 with 2flush sensorG1/2" EN 8371/2" NPTF 0 02 0 0N 0 0Process connections (up to 35 bar)G1" with flush weldeddiaphragm (DIN 3852)Flange DN 25 / PN 40 (DIN 2501)Flange DN 50 / PN 40 (DIN 2501)Z 3 1F 2 0F 2 3Flange DN 80 / PN 16 (DIN 2501) 3 F 1 4Flansch DN 2" / 150 lbs (ANSI B16.5) 3 F 3 2Flansch DN 3" / 150 lbs (ANSI B16.5) 3 F 3 3DRD Ø 65 mm 4 D R D on requestDiaphragmStainless steel 1.4435 (316L)1Hastelloy ® 5 HTantal 5, 6 T on requestSealsInch thread:standard for P N ≤ 35 bar: FKM 1option for P N ≤ 35 bar: EPDM 3standard for P N > 35 bar: NBR 5option for EN 837:without (welded version) 72DRD, flange:without 0Filling FluidsSilicon oil1f<strong>oo</strong>d compatible oil 5, 82Halocarbon 5 C on requestcustomer9 on request<strong>Sp</strong>ecial versionstandardwith c<strong>oo</strong>ling element up to 150 °Cwith c<strong>oo</strong>ling element up to 300 °C0 0 01 5 02 0 0special compensation -40 … +60 °C 9 0 2 2if setting range shall be different from nominal range please specify in your order1 absolute pressure possible from 1 bar2 not possible for vacuum ranges and pressure ranges > 35 bar3 DN80/PN16, 2"/150 lbs and 3"/150 lbs only possible for nominal pressure ranges P N ≤ 7 bar4 mounting flange is included in the delivery (already pre-assembled)5 only possible with process connections6 tantal diaphragm possible with nominal pressure ranges from 1 bar7 possible with pressure ranges between 1 bar and 170 bar8 Name of oil: Mobil DTE FM 32; Category Code: H1; NSF Registration No.: 1306629 option for version without displayHART® is a registered trade mark of HART Communication Foundation; Hastelloy® is a brand name of Haynes International Inc.BD SENSORS GmbHBD-Sensors-Straße 1 Telefon +49 (0) 92 35 / 98 11- 0 www.bdsensors.comD - 95199 Thierstein Telefax +49 (0) 92 35 / 98 11- 11 info@bdsensors.de010108This ordering code contains product specification; properties are not guaranteed. Subject to change without notice.
Change language