Fabrication and Installation Manual - Caesarstone
Fabrication and Installation Manual - Caesarstone
Fabrication and Installation Manual - Caesarstone
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Motivo Edge Profile <strong>Fabrication</strong> Method<br />
There are three methods of fabrication edge profiles with Motivo , as described on these pages.<br />
A. Fabricating Miter Edge Profiles<br />
Fabricate 45° miter edge profiles using Motivo for both surface <strong>and</strong> the<br />
edge in order to create visual continuity of the pattern.<br />
1. Plan the cutting of the slab so that the cut piece can be attached to the<br />
surface at a 90° angle <strong>and</strong> maintain visual continuity of the pattern.<br />
2. Cut the slab at the appropriate location.<br />
3. Fabricate a 45° miter edge profile from the two cut pieces.<br />
4. Glue the miter edges together to create 90 ° angle with a 45° miter edge.<br />
5. Shape the miter edges with a 3mm (¹⁄8”) radius bevel.<br />
1 3a<br />
2<br />
Motivo Textured Finish<br />
Finish Polished Finish<br />
3b<br />
12 <strong>Fabrication</strong> Instructions CaesarStone <strong>Fabrication</strong> <strong>and</strong> <strong>Installation</strong> <strong>Manual</strong><br />
4<br />
5
Change language