Legrand - Tehnounion

32 •
Eliocad TM hospital signalling systems
control units, mounting accessories and configuration accessories
782 17
Pack Cat. No. Main control units
Main control unit for Call programme
or Call + Nurse Present programme
1 782 16 2 configurations can be programmed
- Department control unit: used to group all
calls from the department and those of 3 other
departments via call forwarding
- Centralisation control unit: used to permanently
centralise all the establishment's calls
Display of room numbers via seven 4-digit LED
displays
Display of calls in order of arrival and priority
(emergency call, bathroom call, biomedical alarm,
normal call, patient reassured and staff present)
Indicator lights denoting call, reassurance and staff
present
Call signal buzzer
Up to 128 rooms per control unit
Automatic test to ensure correct operation every
15 minutes
Data stored in memory in the event of power failures
Materials resistant to usual hospital cleaning agents
Supplied with base for tilted mounting on a desk Can
be wall-mounted with plate Cat. No. 782 76
To be connected to the 230 V supply (Mosaic 2P+E
socket Cat. No. 771 11) and to the computer network
(RJ 45 - UTP socket,
2 modules Cat. No. 786 51)
Main control unit for Interphone programme
1 782 17 Specifications identical to control unit
Cat. No. 782 16 with the addition of an automatic
switching interphone system for speaking with a
room, either in confidential mode using the handset,
or in hands-free mode
Depending on the type of call, the interphone can be
used to cancel the call, reassure the patient before
staff attend to them To be connected to the 230 V
supply (Mosaic 2P+E socket Cat. No. 771 11)
and to the computer network (RJ 45 - UTP socket,
2 modules Cat. No. 786 51)
1 782 20
Secondary control units
Secondary control unit without interphone
Wall-mounted
Used in conjunction with the main control unit in
another room or in a corridor
Secondary control unit for Interphone
programme
1 782 21 Wall-mounted
Specifications identical to control unit
Cat. No. 782 20 with the addition of interphone
equipment with handset and hands-free system for
calling the room
782 20 782 93
782 85
+
Pack Cat. No. Mounting accessories for control units
Flush-mounting kit for secondary control units
and interphone door unit
1 782 75 Used to flush-mount control units
Cat. Nos. 782 20/21 and interphone door unit
vertically Includes a flush-mounting box and
mounting accessories
Wall-mounting plate for main control unit
1 782 76 Used to wall-mount main control units
Cat. Nos. 782 16/17
Power supply possible via DLP trunking,
cross-section 50 x 150 mm
1 782 93
Power supply
Konnex modular supply for control units
230 V/29 V - 640 mA
Supplied with rail and connection accessory
7 modules
For optimum safety and continuity of
service, use a UPS
Coupler and accessories
For coupling several Konnex power supplies
1 035 06 Coupler - 1 module
5 485 50 Rail for coupler
1 035 10 Connection accessory (1 module)
1 782 85
Configuration tool
Infrared configuration tool
Infrared parameter setting of interfaces, display
units and control units (room nos. for interfaces,
group nos. for control units)