16.08.2012 Views

2008 RT Caravan Owner Manual

2008 RT Caravan Owner Manual

2008 RT Caravan Owner Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

410 MAINTAINING YOUR VEHICLE<br />

Loose Fuel Filler Cap Message<br />

Should the “Loose Fuel Filler Cap” or “gASCAP” message<br />

appear, there may be a problem in the evaporative<br />

system. Before taking the vehicle into a qualified Dealership<br />

Service center, check first to see if the fuel filler cap<br />

is possibly loose, improperly installed, or damaged. A<br />

loose fuel filler cap message will be displayed in the<br />

instrument cluster. Tighten the gas cap until a �clicking�<br />

sound is heard. This is an indication that the gas cap is<br />

properly tightened. Press the odometer reset button to<br />

turn the message off. If the problem persists, the message<br />

will appear the next time the vehicle is started. If the<br />

problem is detected twice in a row, the system will turn<br />

on the Malfunction Indicator Light (MIL). Resolving the<br />

problem will turn the MIL light off. Take your vehicle in<br />

to a qualified Dealership Service center.<br />

EMISSIONS INSPECTION AND MAINTENANCE<br />

PROGRAMS<br />

In some localities, it may be a legal requirement to pass<br />

an inspection of your vehicle’s emissions control system.<br />

Failure to pass could prevent vehicle registration.<br />

For states, which have an I/M (Inspection and<br />

Maintenance) requirement, this check verifies the<br />

following: the MIL (Malfunction Indicator Light)<br />

is functioning and is not on when the engine is running,<br />

and that the OBD (On Board Diagnostic) system is ready<br />

for testing.<br />

Normally, the OBD system will be ready. The OBD<br />

system may not be ready if your vehicle was recently<br />

serviced, if you recently had a dead battery, or a battery<br />

replacement. If the OBD system should be determined<br />

not ready for the I/M test, your vehicle may fail the test.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!