HS ACRYLIC LACQUER PRIMER - MyAutoProducts.com

RECOATING:HS Acrylic Lacquer Primer Surfacer may be recoated after a 30 minute dry at 77° F. After 8hours dry time primer must be sanded before topcoating.POT LIFE:Not applicableFISH EYE:Do not use fisheye eliminator in this product.PAINTING FLEXIBLE PARTS:Do not use flexible additives in this product.EQUIPMENT CLEAN-UP:Clean equipment immediately after use with FINISH PRO #6100 Gun Wash Cleaner or#5000 General Purpose Lacquer Thinner.TECHNICAL DATA:Mixing Ratio: 2:3Viscosity (RTS): 18-20 seconds #2 ZahnWeight Solids (RTS): 19.90 - 25.39%Volume Solids (RTS): 9.44 - 12.62%Film Build: 0.8 mils per full wet coatCoverage: 151 - 202 sq. ft. per gallon @ 1 dry milV.O.C. (RTS): 4.6 - 4.9 lbs/galDisposal/Safety: see MSDS for this productNOTE: Finish Pro products are not recommended for use in temperatures below 60° F. Use below these temperatures will effectdry times and performance.FOR INDUSTRY USE ONLYRead MSDS Before UseThe contents of the package must be blended with other components before the product can be used. Any mixture of components willhave hazards of all components. Before opening the packages, read all warning labels. Follow all precautions.The material is designed for application only by professionally trained personnel using proper equipment under controlled conditions, andis not intended for sale to the general public.SEE MSDS AND PRODUCT LABELS FOR ADDITIONAL SAFETY INFORMATION.Page 2 of 2 (Rev. 7/03)