TW/F Flanged Type Thermowells - Elimko

STANDART FEATURESBar MaterialsASTM A304 DIN 1.4571 INCOLOY 825ASTM A316 Ti DIN 1.4749 HASTELLOY C4ASTM A316 L DIN 1.4828 BRASSASTM A310 DIN 1.4841 PTFEASTM A321 DIN 1.7335ASTM A446 INCONEL 600ASTM A105 INCOLOY 800Bore Diameter5.0 mm6.0 mm6.6 mm7.0 mm8.0 mm9.0 mm10.0 mmNote 1 : Elimko Thermowells canbe produced additionally to thestandart bore diameters, it is alsopossible to produce bore diametersfrom 4 mm to 22 mm, up tomaximum 1200 mm length.Note 2 : The above mentioned solid bar stock materials are our standart types. Special materials could be supplied uponreceipt of satisfactory orders.Others : Haynes 25, Carpenter, 20 CB, Nichrome, HCF, 50Co-30Cr, Monel 400, Titanium, Tantalum, X-750, B, C276, X.Note 3 : Satellite coating can be produced against abrassion.TestsThermowells can be tested after produced on request. These tests are made by special institutions for a fea.a- Pressure testsb- X-ray testsTW/F FLANGED TYPE THERMOWELL CODINGTW/FS Straight TW/FT Tapered TW/FSt SteppedP : Welding DiameterØ IC : Instrument ConnectionØ B : Bore DiameterH : Head LenghtU : Insertion LengthA : Stem LengthFlanş : Flange Type & DiameterØ Q/QT/QSt : Stem/Root DiameterØ V/VT/VSt : Tip DiameterTth : Tip ThicknessL : Tip Lenght

TWF01020304050607080910111213141516171819BPr/tPr/sFsFrFtFwtICHPULAQVTthWmFmOTypeBore DiameterProduction TypeProduction StandardFlange SizeFlange RateFlange TypeFlange Welding TypeInstrument ConnectionHead LenghtHead DiameterInsertion LengthTip LenghtStem LengthStem/Root DiameterTip DiameterTip ThicknessWell MaterialFlange MaterialOptionsTW F Flanged Type ThermowellsFS Straight TypeF FT Tapered TypeFSt Stepped Type01 B Bore DiameterB ......Please write B diameterlike B ..... Example: B 602 Pr/t Production TypeSB Solid Bar DrilledPr/t SBT Solid Bar TaperedP Pipe03 Pr/s Production StandardM MetricPr/sI Non Metric04 Fs Flange SizeFsM01 DN25FsM02 DN40FsM FsM03 DN50FsM04 DN64FsM.... * ..........FsS01 1/2"FsS02 1"FsS FsS03 1 1/2"FsS04 2"FsS.... * ..........05 Fr Flange RateFrM01 PN10FrM02 PN25FrM FrM03 PN40FrM04 PN100FrM.... * ..........FrS01 150#FrS02 300#FrS FrS03 600#FrS04 1500#FrS.... * ..........06 Ft Flange TypeRF Raised FaceFtFF Flat FaceRTJ Ring Type JointTHR Threaded Raised Face Flange07 Fwt Flange Welding TypeFp Full PenetrationFwtPp Partial PenetrationThr Threaded&WeldedFwt00 Without Welding08 IC Instrument ConnectionIC01 M20x1.5IC IC21 1/2" NPTIC.... * ..........09 H Head LenghtH01 60 mmH02 86 mmH H21 2- 1/2H22 3- 1/2H.... * ..........10 P Head DiameterP01 30 mmP P02 1 1/2"P.... * ..........11 U Insertion LengthU ......Please write U lengthlike U ..... Example: U 10012 L Tip LengthL00 No SteppedL01 50 mmL L02 65 mmL21 2"L22 2 1/2"L..... * ..........13 A Stem LenghtA ......Please write A lengthlike A ..... Example: A 15014 Q For TW/FS Stem/Root DiameterQQ01 16 mmQ02 19 mmQ03 22 mmQ21 5/8"Q22 3/4"Q23 7/8"Q.... * ..........* Please give the Process Connection (P), Instrument Connection (IC), Head Length (H), Tip Length (L), Stem/Root Diameter (Q,QT, QSt),Tip Diameter (V, VT, VSt), Tip Thickness (Tth), Well Material (Wm), Flange Material (Fm) and Options (O) of the thermowells, if they arenot exist on the tables.** Please apply to Elimko for these kinds of well and flange materials.

14 QT For TW/FT Stem/Root DiameterQT01 27 mmQT QT21 1.063QT.... * ..........14 QSt For TW/FSt Stem/Root DiameterQSt01 19 mmQSt QSt21 3/4"QSt.... * ..........15 V For TW/FS Tip DiameterV01 16 mmV02 19 mmVV02 22 mmV21 5/8"V22 3/4"V23 7/8"V.... * ..........15 VT For TW/FT Tip DiameterVT01 16 mmVT02 19 mmVT VT21 5/8"VT22 3/4"VT.... * ..........15 VSt For TW/FSt Tip DiameterVSt01 12,7 mmVSt VSt21 1/2"VSt.... * ..........16 Tth Tip ThicknessTth01 6 mmTth Tth21 1/4"Tth.... * ..........17 Wm Well MaterialWm01 ASTM A304Wm02 ASTM A316 TiWm03 ASTM A316 LWm04 ASTM A310Wm05 ASTM A321Wm06 ASTM A446Wm07 ASTM A105Wm08 DIN 1.4571Wm09 DIN 1.4749Wm Wm10 DIN 1.4828Wm11 DIN 1.4841Wm12 DIN 1.7335Wm13 INCONEL 600 **Wm14 INCOLOY 800 **Wm15 INCOLOY 825 **Wm16 HASTELLOY C4 **Wm17 MONEL 400 **Wm18 PTFEWm.... * ..........18 Fm Flange MaterialFm01 ASTM A304Fm02 ASTM A316 TiFm03 ASTM A316 LFm04 ASTM A310Fm05 ASTM A321Fm06 ASTM A446Fm07 ASTM A105Fm08 DIN 1.4571Fm09 DIN 1.4749Fm Fm10 DIN 1.4828Fm11 DIN 1.4841Fm12 DIN 1.7335Fm13 INCONEL 600 **Fm14 INCOLOY 800 **Fm15 INCOLOY 825 **Fm16 HASTELLOY C4 **Fm17 MONEL 400 **Fm18 PTFEFm.... * ..........19 O OptionsO01 Screw Plug and ChainO02 Tag No Written on SS PlateO O03 Pressure TestO04 Material CertificateO.... * ..........EXAMPLESTW/FS-B18-P-M-FsM02-FrM04-THR-Fwt00-IC01-H110-P01-U120-L00-A130-Q02-V02-Tth02-Wm18-Fm18-O01-O02-O03Well Type (TW) = TW/FS Flanged Type Straight Thermowell,Bore Diameter (B) = 18 mm, Production Type (P) = Pipe, Production Standard (M) = Metric,Flange Size (FsM02) = DN40, Flange Rate (FrM04) = PN100,Flange Type (THR) = Threaded Raised Face Flange, Flange Welding Type (Fwt00) = Without Welding,Instrument Connection (IC01) = M20X1,5, Head Lenght (H02) = 110 mm,Head Diameter (P01) = 30 mm, Insertion Length (U) = 1200, Tip Lenght (L00) = No Stepped,Stem Length (A) = 1300, Stem/Root Diameter (Q02) = 22 mm, Tip Diameter (V02) = 22 mm,Tip Thickness (Tth02) = 10 mm, Well Material (Wm18) = PTFE, Flange Material (Fm18) = PTFE,Options (001) = Screw Plug and Chain / (002) = Tag No Written on SS Plate / (003) = Pressure TestHOW TO ORDERSelect one of the types of TW/T, TW/W, TW/W, TW/V, TW/F and TW/WI according to the process. And specify;thermowell material, process connection, connection type, type of the flange (if flanged), it’s material, bore diameter,insertion length, length of connection.* Our company has the right to make each kind of changes in manufacture in direction of technologic development without informing previously.Elimko Electronic Production and Control Co. Ltd.Adress: 8. Cadde 21. Sk. (Eski 68. Sk.) No: 16 Emek 06510 Ankara, TurkeyTel: (+90) 312 212 64 50 (Pbx) • Fax: (+90) 312 212 41 43e-mail: elimko@elimko.com.tr • www.elimko.com.tr