Brake and Suspension Catalogue 2010.pdf - E. Fox (Engineers)

Workshop Solutions®BRAKE & SUSPENSIONwww.sykes-pickavant.com

CONTENTS1Braking• Brake Pipe Tools......................................................................................................................................2• Brake Pipe Flaring Tools......................................................................................................................3-5• Brake Bleeding and Fluid Testing.......................................................................................................6-9• Brake Caliper Wind Back Tools.......................................................................................................10-11• Applications...............................................................................................................................12-13• Brake System Service Tools............................................................................................................14-15Suspension• Coil Spring Compressors................................................................................................................16-19• Ball Joint Separators and Splitters.................................................................................................20-21• Suspension Bush Removal & Installation Tools............................................................................22-23• Press Tools for Suspension Components......................................................................................24-25• Universal Suspension and Bearing Removal Kits.........................................................................26-27• Hub Pullers........................................................................................................................................28-31• Steering & Suspension Pullers........................................................................................................32-33• Wheel & Tyre Removal.....................................................................................................................34-35• Wheel and Tyre Tools.............................................................................................................................36Index ........................................................................................................................................................... 37www.sykes-pickavant.com

2 BRAKE PIPE TOOLSBrake Pipe Aid Pliers02160000• For forming tight bends in brake and clutch pipes.• Ideal for use in restricted space, and for use on-the-vehicle.• Can also be used for quick tube nut thread alignment,and as a guide when cutting tube.• For 3/16" or 4.75mm pipe.Pipe Bending Tool 02260000Pipe Bending Tool for Plastic Coated Pipes10mm (3/16 - 3/8)• Suitable for use with steel,copper, brass tubing(inc. Diesel Fuel Pipe).• Produces bends up to 180°.• Fitted with lug on handlefor bench use with a vice.• Suitable for use in Automotive,Refrigeration, Air Conditioningand Plumbing applications.• Pipe sizes:- 3/16" to 3/8".• 4.75mm to 10mm.Spare Parts 02260100 Forming BlockPipe Bender02560000Pipe Bender for Plastic Coated Pipes - 4.75 - 6mm• Unique rolling action forms bends up to 180° without causingabrasion damage to plastic or epoxy coated pipes.• Fitted with lug on handle for bench use with a vice.• Pipe sizes:-• 3/16" to 1/4"• 4.75mm to 6mm.Telescopic Pipe Tube Cutter3-32mm02210000• Telescopic action cutter.• Grooved rollers allow forcutting close-up to flaredpipe ends.• C/w fold-away de-burringblade and spare cutter wheel.Spare Parts :• 02210100 Replacementcutter wheels - pack of 2Mini Pipe Tube Cutter3 - 22mm66092500• One-hand operation,ideal for on-the-vehicleworking.Pipe Deburring Tool 02730000Essential tool when preparing to flare copper brakepipe, to avoid the risk of swarf in the pipe.• Double ended tool for the deburring of Brake & FuelPipes when preparing ends for use.• Works on all types of copper,steel and brass pipes.• Pipe diameter capacityfrom 1/8 - 5/8”.Brake Pipe Corrosion Tool02340000• This tool has been especially designed to allow the user to inspectbrake pipes for corrosion, both quickly and easily• It features two scraper areas on the head of the tool, which allowsthe user to remove dirt and corrosion from the pipes, and therebybe able to effectively examine the condition of the pipeswww.sykes-pickavant.com

BRAKE FLARING TOOLS - FLAREMASTER23Flaremaster2® - Hand Held Automotive Brake Pipe Flaring Tool02725000NEW Improved model for 2009• New features :-• Quick-release chuck for positive engagement of the punch• Fast-turn coarse thread on hydraulic ram, for quick assembly• Locking bolt with swivel pin, for fast tightening• Inter-changeable dies, held in place by magnets• Enhanced bridge unit for greater strength• Re-designed, ergonomic, handle moulding, for greater comfortProduct demonstration video available -download a copy from www.sykes-pickavant.com• Unique, original, patented design, for producing high quality pipe flares- 'on-the-vehicle'• Hydraulic power unit provides ultimate power for precision flaring• Creates SAE & DIN single and double flares ( 3/16” and 4.75mm pipe )• Flaring pipes 'on-the-vehicle' allows for accurate repair sectionsto be splice-in following repair work or accident damage• Create full, or part sections of pipe, which can be trimmed,flared, splice-in as required.NEW - Quick-release chuckfor positive and accuratelocation of punchesNEW - Re-inforced bridgeassembly for added strengthNEW - Ergonomic handle designPlace pipe in die Tighten the clamping nut.Insert the punch and ram assembly Apply power to create the flare.Flaremaster2® Brake Pipe Flaring Kit02729500Contents :02725000 Flaremaster2 Hand Held Brake Pipe Flaring Tool02160000 Pipe Aid Pliers02210000 Pipe Cutter02730000 Pipe De-Burring ToolSupplied in moulded plastic storage boxwww.sykes-pickavant.com

4BRAKE PIPE FLARING‘270‘ Series Brake Pipe Flaring ToolsSpeed, Accuracy and Reliability• Metric & imperial pipe sizes.• From 3/16” to 1/2”• From 4.75mm to 12mm.• Produces both Convex and Double Lap flares toSAE and DIN standards.• Unique ‘ Dial-a-Size’ Turret design.• Lever cam operation for quick flaring.• Automatic punch extraction from flare.• Screw clamp for accurate die alignment.• Variety of kits available to suit requirements.• All components available individually.Product demonstration video available -download a copy from www.sykes-pickavant.com‘270’ Series Brake Pipe Kit Specifications :-Reference Flare Pattern 3/16” 1/4” 5/16” 3/8” 1/2” 4.75m 6mm 8mm 10mm 12mm02700000 SAE Convex Single X X X X XDIN Convex SingleXSAE / DIN Double X X X X X02700100 SAE Convex Single X XDIN Convex SingleSAE / DIN Double X X02700200 SAE Convex Single X X X X XDIN Convex SingleXSAE / DIN Double X X X X X02700800 SAE Convex Single X X X X X X X X X XDIN Convex SingleXSAE / DIN Double X X X X X X X X X X02700900 SAE Convex Single X X X XDIN Convex SingleXSAE / DIN Double X X X XBrake Pipe Flaring Kit - 270 Series 02700000For use on pipe sizes :-SAE Single & Double flares - 3/16, 1/4, 5/16, 3/8, 4.75mm DIN Single flares - 4.75mm.Brake Pipe Flaring Kit - 270 Series 02700100Suitable for brake pipe sizes :-SAE Single & Double Lap flares - 3/16" & 4.75mm.Brake Pipe Flaring Kit - 270 Series 02700200Suitable for brake pipe sizes :-SAE Single and Double flares - 3/16", 4.75, 6, 8, 10mm DIN Single flares - 4.75mm.Brake Pipe Flaring Kit - 270 Series 02700800Suitable for brake pipe sizes :-SAE Single and Double flares - 3/16, 1/4, 5/16, 3/8, 1/2", 4.75, 6, 8, 10, 12mm .DIN Single flares - 4.75mm.Brake Pipe Flaring Kit - 270 Series 02700900Suitable for brake pipe sizes :-SAE Single and Double flares - 3/16, 1/4", 4.75, 6mm.DIN Single flares - 4.75mm.www.sykes-pickavant.com

BRAKE PIPE FLARING5‘ 270 ‘ Series – Individual Punch and Die Selection ChartFlare Pattern Tube o.d. 270 Series Individual SelectionPunchDie SetSAE Convex ( single ) 3/16” 02705100 027031001/4” 02705200 027032005/16” 02705300 027033003/8” 02705400 027034001/2” 02705500 027035006mm 02705200 027042008mm 02705300 0270430010mm 02705400 0270440012mm 02705500 02704500DIN Convex ( single ) 4.75mm 02706100 027041006mm 02706200 027047008mm 02706300 0270480010mm 02706400 0270490012mm 02706500 02705000SAE / DIN ( double ) 3/16” 02705100 02703100027071001/4” 02705200 02703200027071005/16” 02705300 02703300027072003/8” 02705400 02703400027072001/2” 02705500 02703500027073004.75mm 02705100 02703100027071006mm 02705200 02704200027071008mm 02705300 027043000270720010mm 02705400 027044000270720012mm 02705500 0270450002707300270’ Series – Spare Parts:02702200 Die clamp top plate02702500 Die clamp screw & T bar02702600 Shoulder bolts x 202702700 Handlewww.sykes-pickavant.com

6BRAKE BLEEDINGDrain Twin Pressure & Vacuum Brake Bleeder34500000For servicing advanced ABS Brake systems• Drain Twin is a versatile brake bleeder for all kinds of brake service work,including advanced ABS systems with stability and traction control functions• VM approval from 11 international vehicle manufacturers• One air-operated Pump - Twin functions - Pressure & Vacuum• Pulsating pressure pump purges brake system more effectively than aconstant pressure pump• Adjustable working pressure up to 2.8 bar ( 42 psi )eg Mercedes = 2.6 bar• Non-drip couplings and nipples for a clean and safe working environment• Pressure equalization system ensures new fluid container is kept sealed• No contact required with new fluid eliminates risk of contamination• Supplied with accessories pack :-• New fluid container and inlet suction lance / float valve• Vacuum waste container• Pressure waste container• Vacuum suction hose connector• Suction / fill gun and filter• Standard E20 master cylinder connector• Full operating instructions supplied• Demonstration video available• Range of specialist caps also available ( see page 8 )For servicing advanced ABS Brake systemsDrain Twin is approved by the following vehicle manufacturers :-• Ford ( FSE programme )• GM Europe ( Vauxhall / Opel ) & GM USA• Renault• Citroen• Land Rover• Jaguar• Daimler Chrysler• Infiniti• Nissan• Toyota• VolvoProduct demonstration video available -download a copy from www.sykes-pickavant.comTechnical DataDrain Twin Brake Bleeder 34500000Inlet Air Pressure Up to 12 bar ( 174psi )Max. Air Consumption 75 ltrs/min at 3.5 bar ( 2.6cfm at 50psi )Adjustable Working Pressure Up to 2.8 bar ( 42psi ) +/- 0.2 barPressure Safety Valve At 3.5 bar ( 50psi )Main Fluid Hose3.5 mtrs ( 11.5ft ) c/w non-drip couplingsAir Supply Connection1/4” BSP Female ThreadInternal Fluid SealsMade from EPDM for Brake FluidDimensions 44.0 x 36.5 x 46.5 cm ( 17” x 14” x 18” )Weight 11.5kg ( 26.5lbs )Drain Twin Brake Bleederon Optional TrolleyOptional Accessories12018 0345 Mobile trolley for DrainTwin / Drain One12018 0346 Upgrade kit for use with25 & 60 Ltr barrels12018 8416 Universal Adaptor for BrakeFluid Master CylindersFor optional specialist Vehicle Reservoirconnectors - refer to page 8www.sykes-pickavant.com

BRAKE BLEEDING 7Drain One Pressure Brake Bleeder34600000For servicing advanced ABS Brake systems• Pressure Brake Bleeding only• Suitable for use with modern ABS systems• Approved by GM Europe ( Vauxhall / Opel ) and GM USA• Pulsating pressure pump - adjustable to 2.8 bar ( 42 psi )• Non-drip couplings and nipples for a clean andsafe working environment• Pressure equalization system ensures new fluidcontainer is kept sealed• No contact required with newfluid eliminates risk ofcontamination• Supplied with accessories pack :-• New fluid container and inletsuction lance / float valve• Pressure waste container• Standard E20 master cylinder connector• Range of specialist caps also availableVehicle Manufacturer ApprovalsDrain One is approved by the following vehicle manufacturers :-• GM Europe ( Vauxhall / Opel )• GM USATechnical DataDrain One Brake Bleeder 34600000Inlet Air Pressure Up to 12 bar ( 174psi )Max. Air Consumption 66 ltrs/min at 3.0 bar ( 2.33cfm at 43psi )Adjustable Working Pressure Up to 2.8 bar ( 42psi ) +/- 0.2 barPressure Safety Valve At 3.5 bar ( 50psi )Main Fluid Hose3.5 mtrs ( 11.5ft ) c/w non-drip couplingsAir Supply Connection _ ” BSP Female ThreadInternal Fluid SealsMade from EPDM for Brake FluidDimensions 44.0 x 36.5 x 46.5 cm ( 17” x 14” x 18” )Weight 7.0kg ( 15.4lbs )Optional Accessories12018 0345 Mobile trolley for DrainTwin / Drain One12018 0346 Upgrade kit for use with25 & 60 Ltr barrels12018 7102 Master Cylinder Suction / Fill Gun12018 8416 Universal Adaptor for BrakeFluid Master CylindersFor optional specialist Vehicle Reservoirconnectors - refer to page 8www.sykes-pickavant.com

8ACCESSORIES FOR DRAIN TWIN & DRAIN ONE BRAKE BLEEDERSOptional brake bleeding connectors and accessories12018 8416Reservoir Adaptor - Universalwith adjustable fitting chain12018 0218Reservoir Adaptor 46.5 x 3.5mmUniversal E20 Std ConnectorSupplied with Drain Twin / One12018 0212Reservoir Adaptor 46.5 x 3.5mmUniversal E20 Std Connectorwith Flexible Hose12018 0222Reservoir Adaptor 46.5 x 3.5mmUniversal E20 Std ConnectorwithSwivel connector12018 0210Reservoir Adaptor28.5 x 3mmBLMC, DAF, Ford12018 0211Reservoir Adaptor29.5 x 3.5mmPorsche, VAG12018 0214Reservoir Adaptor45.5 x 4mmFiat Group, Mazda, Toyota12018 0213Reservoir Adaptor56.5 x 4mmOpel, Peugeot12018 0215Reservoir Adaptor63.0 x 4mmCitroen, Fiat, Ford,Peugeot, Renault12018 0216Reservoir Adaptor79.0 x 3mmMitsubishi, Nissan Patrol,Volvo S40 / V4012018 0219 - 1/4”12018 0220 - 1/8”Adaptor / Conversion Hoses - to convert existing threadedadaptors to work with Drain Twin & Drain One12018 0345 Plastic Trolley Cart for Drain Twin & Drain One12018 0346 Upgrade Kit for 25 & 60 Ltr barrels ( Lance & Hose assy )12018 7100 Suction Lance 5ltr12018 7107 Main Fluid Hose12018 0070 Fluid Collector Bottle12018 7106 Fluid Suction Hose12018 0218 Std E20 Adaptor12018 7103 Filter Hose12018 7102 Suction / Filling Gunwww.sykes-pickavant.com

BRAKE BLEEDING 9Vacuum Brake Bleeder03480000A stand-alone brake bleeder that uses vacuum to “suck” the fluid out03480000 + 03481100• Removes the brake fluid from the master cylinder by sucking it out of the filler.• Fast fluid changes as not all the fluid needs to be bled via a bleed nipple• No need to have a pressure tight seal on those difficult to get at master cylinder reservoirs.• By “sucking” the fluid away risk of sudden spillage is significantly reduced.• Uses standard work shop compressed air supply to generate vacuum (70 – 170 psi).• When combined with the Automatic Brake Fluid Filler Unit (03481100), turns brakeand clutch system bleeding into a genuine one man operation.Brake Fluid Auto Filler03481100A stand-alone brake fluid container for automatic filling of brake fluid reservoirs.• Removes the need for a second person to stand over the reservoir and keep it topped up.• Reduces the risk of accidental fluid spillage during topping up.• Air tight brass tap ensures fluid stays “fresh” for next time.• Graduated scale gives an accurate indication of fluid used.Accessories for old Sykes-Pickavant Brake BleedersSykes-Pickavant continues to maintain availability of spare parts and accessoriesfor previous generations of SP Brake Bleeding equipment -models 03490000 / 03550000 / 03580000 / 035800V2Popular accessories for the above models :-03555400 Fluid Drain Bottle and Bleed Pipe - suitable for all types of Brake Bleeders035590V2 Universal Master Cylinder Cap Adaptor for 03490000 / 0355000003559600 Universal Master Cylinder Cap Adaptor for 03580000 / 035800V203580800 Master Cylinder Cap Set for 03580000 / 035800V2Brake Fluid Tester0353000012v operation from vehicles' own supply• Works on all brake fluids with boiling points up to 320°C• DOT 3, DOT 4 and DOT 5.1• Displays battery voltage, and boiling point of fluid• Simple pass or fail indicatorThe Sykes-Pickavant Brake Fluid Tester tests brake fluid types Dot 3,4and 5.1. It works by comparing the boiling point of a sample of brakefluid taken from the vehicle, against expected values selected fromthe internal menu. Brake fluid is hygroscopic - increased absorptionof water reduces the anti-corrosive effectiveness of the fluid, can leadto vapour locks and potentially to complete brake failure. The testersimply indicates the boiling point of the sample and tells you theacceptable lower limit for each fluid specification (Dot 3, 4,5.1). Thetester is powered by the vehicles own 12 volt battery.Brake Bleeder Bottle c/w non-return valve66050000• For one-man operation• Non return valve ensuresair does not return back into the systemBrake Bleeder Bottle for dual-circuit brakes66050100• For one-man operation• Non return valve ensuresair does not return back into the system• Dual-circuit brake systemswww.sykes-pickavant.com

10 BRAKE CALIPER TOOLSAir Assisted Caliper Piston Wind Back Tool 03619800• Air operated ram applies pressure to the caliper piston,while the handle is rotated by hand.• Easy to use – works on standard workshop air supply.• Reversible – works on both RH and LH applications.• Can be used on Wind back and Push back pistons.• Supplied with adaptor ref 036108V2, which covers awide range of popular vehicles (applications list included).• Full range of additional specialist adaptors available(refer to ref 03619400 below).Product demonstration video available - download a copy from www.sykes-pickavant.comSlimline Adaptor Set 03619400• Set of 7 special slimline adaptors for use with Air AssistedWind Back Tool.• Special slimline design allows access where conventionalwind back adaptors cannot fit.• Provide full vehicle range coverage –applications list included.• Can also be used with conventional wind back tools.Caliper Piston Windback Tool -Restricted Access Applications 03619900• Piston Wind Back Tool with special shortened slimline body.• For applications where standard wind back tools are too large to allow access.• Specially designed reaction strap to allow for ‘perfect fit’ location into the caliper.• Supplied with special adaptor for MINI & BMW 1 Series models.• Can be used with conventional adaptors in restricted access situations.‘361’ Series – Brake Caliper Piston Wind Back KitsA range of kits covering a wide variety of both RH & LH Wind Backand Push Back applications• Essential tools for brake pad replacement, and caliper servicing.• Allows for the correct amount of pressure to be applied, to the pistonwithin its’ housing, without risk of damage.Caliper Piston Windback Tool - RH Starter Set036100V2Set Contents :03619000 RH Caliper Wind Back Body.036103V2 Reaction Strap.Individual adaptors for RH applications x 5.Supplied in moulded storage tray.Refer to tables on pages 10 & 11 for full applications details.Caliper Piston Windback Tool – RH Basic Set 660665V2Set Contents :03619000 RH Caliper Wind Back Body.036103V2 Reaction Strap.Supplied with adaptor no. 1 (036105V2) only.Supplied in display carton.Refer to tables on pages 10 & 11 for full applications details.www.sykes-pickavant.com

BRAKE CALIPER TOOLS11Caliper Piston Windback Tool - RH Master Set036195V2Set contents :03619000 RH Caliper Wind Back Body.036103V2 Reaction Strap.Individual adaptors for RH applications x 7.Supplied in moulded storage tray.Refer to tables on pages 10 & 11 for full applications details.Caliper Piston Windback Tool - LH Starter Set03619600Set contents :03619100 LH Caliper Wind Back Body.036103V2 Reaction Strap.Individual adaptors for LH applications x 4.Supplied in moulded storage tray.Refer to tables on pages 10 & 11 for full applications details.Caliper Piston Windback Tool - RH & LH Combined Master Set03619700Set contents :03619000 RH Caliper Wind Back Body.03619100 LH Caliper Wind Back Body.036103V2 Reaction Strap.Individual adaptors for RH & LH applications x 18.Supplied in moulded storage tray.Refer to tables on pages 10 & 11 for full applications details.‘361’ Series Components and Spare Parts03619000 RH Caliper Wind Back Body03619100 LH Caliper Wind Back Body036103V2 Reaction Strap036105V2 Drive Adaptor No. 1036108V2 Drive Adaptor No. 2036110V2 Drive Adaptor No. 3036118V2 Drive Adaptor No. 4036107V2 Drive Adaptor No. 5036114V2 Drive Adaptor No. 7036120V2 Drive Adaptor No. 8036121V2 Drive Adaptor No. 9036109V2 Drive Adaptor No. 10036111V2 Drive Adaptor No. 11036112V2 Drive Adaptor No. 12036122V2 Drive Adaptor No. 14036115V2 Drive Adaptor No. 15036116V2 Drive Adaptor No. 16036117V2 Drive Adaptor No. 17036106V2 Drive Adaptor No. 18036119V2 Drive Adaptor No. 19036113V2 Drive Key Adaptor 12mm hexFor individual applications, please refer tothe table on pages 10 & 11www.sykes-pickavant.com

12 BRAKE CALIPER TOOLS036105V2036106V2036107V2036108V2036109V2036110V2036111V2036112V2036113V2036114V2036115V2036116V2036117V2036118V2036119V2036120V2036121V2036122V203619400Slimline03619700036100V2036195V20361960066066500MAKE AND MODEL ADAPTOR NUMBERS KIT COVERAGEAlfa Romeo 155 1.8-2.0l, 164 TD (93), 164 3.0 V6 (91) • • • • • • •Alfa Romeo 164 2.0 l, • •Alfa Romeo 164 2.0 Twin Spark, 2.0 Turbo (88-), 3.0 l V6 • • • • •Audi 80, 90, & V8's,A3,A4, A6, A8 (rear calliper) • • • • • • •Audi A3,A4,A6,A8 (push-back pistons) • • • • •Audi 100 TDi(91) • • • •Audi A8,S8 (99-) • •Audi 200 ('80-), Coupe GT SE (82-), 80,90,100,200, • • • • •Quattro (-87), 90, 20V (88-BMW – most models (push-back piston) • • • • •BMW 740I 8cyl. (91) • • • •Citroën ZX 2.0I 16v. • • • • • • •Citroën - most models (push-back piston) • • • • •Citroën XM, XM Turbo CT 2.0, Xantia 1.8i - • • •1.9D & TD - 2.0I-2.0 16S (93-94), Activa.Citroën BX ('83-), BX 16V ('88-) • •Citroën C3 • •Citroën C5 (front calliper – left hand wheel) • • • •Citroën C5 (front calliper – right hand wheel) • • • •Citroën C5 rear callipers push-back pistons • • • • •Fiat Tipo TD 16V, Uno Turbo (85-), Croma TD • • • • • • •Fiat Uno Turbo iE – Barchetta • •Fiat Stilo • • •Ford Sierra (ABS bak), Granada (85 -) • • • • • • •Ford (Australia & NZ) Thunderbird Turbo • • • • • • •Ford (Australia & NZ) Telstar, Laser • • • •Ford Escort 2000 RS 16v, Mondeo V6 24v • •Ford (USA) Mercury, Monarch, Thunderbird • •Ford Escort Mk III, IV, Orion, XR3I, Focus (98-) push-back pistons • • • • •Ford Mondeo 2,0 Ghia • • • • • •Ford Focus Cmax • • • • •Honda Civic Vti - CRX – Accord, Concerto Sxi & 1.6 • •Honda CRX, 1.6i-16V (88-90),Accord 1800 (84-85), 2.0i (86-), • • • • • • •Prelude 16V (88-), Legend V6Honda – most models (push-back pistons) • • • • •Honda Prelude 2.0 i & 2.3 i • • •Jaguar XJ 40 series. • • • • • • •Jaguar S series (99-) • • •Jaguar – most models (push-back pistons) • • • • •Lancia Dedra 2.0 Ei Tur (93), Delta 1.6 Gti (92), Thema iE 16v (92), • • • • • • •Thema 2000 Turbo, Kappa 2.0-2.4LS, 2.4 TDLancia Delta 1.9 TD (95) • • • •Lancia Thema alte (85-) • • • • •Lincoln Continental • •www.sykes-pickavant.com

BRAKE CALIPER TOOLS13036105V2036106V2036107V2036108V2036109V2036110V2036111V2036112V2036113V2036114V2036115V2036116V2036117V2036118V2036119V2036120V2036121V2036122V203619400Slimline03619700036100V2036195V20361960066066500MAKE AND MODEL ADAPTOR NUMBERS KIT COVERAGEMazda 323 GTi, GTX (86-), 929 (82-), RX7 (81-), 626 16V (87-), • • • •626 GT (86-), 929 V6 (88-)Mitsubishi Galant GLSi • • • •Misubishi – most models (push-back pistons) • • • • •Nissan 280 ZX (82-84), 300 ZX Turbo (84-89), Bluebird 16V (89-), • • • • • • •Silvia 1.8 Turbo (85-88)100 Nx 2.0 (93), Primera 2.0 GT (94), 200 SX turbo 16V, • • • • • • •Maxima 2.0 GX-3.0 GX (95)Nissan Primera 2.0, Bluebird. • • •Nissan Primera ’03 - • • • • •Nissan Primera (’02-) • • •Nissan – most models (push-back piston) • • • • •Opel AstraG, Zafira (with Bosch rear callipers) • • •Opel Astra G, Corsa C, Zafira (with Lucas TRW rear callipers ’02-) • • •Opel Vectra ’02- • • •Peugeot 206 ’03 Gti, HDi, CC • •Peugeot 306 • • • • • • •Peugeot 309 Gti 16S (91), 405 Sri, Gri, Gli (87-), 405 M1 16V • • • • • • •Peugeot 406, 806 • • • • • • •Proton 416 • • •Renault Master Van. • • • • • • •Renault – most models • • •Renault Laguna 2.0 ABS (94) Laguna 2.2D(95), Safrane 2.0-2.2 TD V6 • • •Renault Alpine V6 (‘85-) • •Rover 216 Gti 16V, 820 Si 2.0 (93), 825 SD 2.5 (93) • • • • • • •Rover 220 C turbo (95) • •Rover 623 Si • • •Rover – most models (push-back piston) • • • • •Saab 9000 CS 2.0 (93), 9000 CSE Turbo (93) • • • • • • •Saab 99L, 900 Turbo (74-81), 900 (81-87), • •Seat Toledo GT 16V – GT 2.0 (93), Ibiza 1.8 Gti 16V (95) • • • • • • •Subaru L serie & Serie 2 • • • • • • •Subaru 1600 Kombi (‘79-), 1.6-1.8 SRx, Kombi (‘79-‘83), 1800 (‘84-), • •1800 Lim, Kombi, Tourismo 4WD (‘82-‘83),Toyota Celica, Corolla GT, MR2 • • • •Toyota Avensis • • •Toyota – most models (push-back piston) • • • • •Vauxhall Astra G. Zafira • • •Volkswagen Passat 2.0 & 2.2 litre (84-),Golf Rallye (-89),Golf II GTi 16V (89-), Corrrado (89-),Vento GT (92), Transporter T4 • • • • • • •Volkswagen Golf Gti Mk.III & Mk.IV, Passat VR6, Vento GT (92) • • • •Volkswagen Golf II GTi (83-'87), Scirocco 16V ('84-) • • • • •Volkswagen – most models (push-back piston) • • • • •Volvo S40 & V40 • • • • • • •Volvo – most models • • • • •www.sykes-pickavant.com

14 BRAKE SERVICE TOOLSDuo Brake Pin Punches• Specially designed punches for removing and installing stubborn brake pins• Short side for loosening the pin - Long side for pushing pins out• Duo design minimises risk of damage to pins and calipersDuo Brake Pin Punch 3mm 03561300• Universal applications inc. MercedesDuo Brake Pin Punch 4mm 03561400• Universal applicationsDuo Brake Pin Punch 5.8mm 03561600• GM Vauxhall / Opel stepped punch for hollow spring pinsDuo Brake Pin Punches 03562000• Set of three Duo Brake Pin PunchesBrake Caliper Cleaning Files• Scraping file for removal of course residue on Brake Calipers• Special scraping surface saves time and is more effective than standard files because the coarse tooth design will not clogCaliper Cleaning File03620100• Universal model for most vehiclesCaliper Cleaning File03620200• Special extra slim model for Japanese vehiclesCaliper Hex Wrench - 7mm660660007mm applications -Caliper bolts on Ford Escort, Fiesta &Orion - Valve setting on VW Golf &Polo 1.05, 1.1 and 1.3 litre.Brake Spring Tool03590000• For removing and replacing brake shoe ‘pull-off ‘ springs.• Cranked for easy access, with a grooved tip for stretchingthe spring.Brake Spring Plier - Standard Model for Car / Van applications03701100Brake Spring Plier - Large Model for Van / HGV applications03701200• For the safe and easy removal of brake shoe springs.• Can be used in either RH or LH brake assembly situations.• Cross cut floating swivel head minimises risk of damage to components.• Provides controlled compression of the brake spring for easy removal.Part Number Spring Wire Length Depth WeightDiameter03701100 3mm 230mm 32mm 0.230kg03701200 3mm 350mm 83mm 0.580kgwww.sykes-pickavant.com

BRAKE SERVICE TOOLS15Brake Hose Clamps (2)02150000• Lightweight, adjustable clampsfor flexible hoses.• Ideal for brake, fuel orcooling system hoses,particularly where accessis restricted.• Supplied as a set of 2.Brake & Fuel Line Clamp03570000Lightweight, non-conductive,glass reinforced nylon clamp.This type of clamp is particularly usefulwhere the clamp needs to be lefton the brake line for anextended period,- eg body repair shops.Plastic Hose ClampPlier Set (3) 03575000Set of three HoseClamp Pliers -small / medium / largeIdeal for Brake & Fuel lines.Also suitable for coolanthoses, aircon hoses etc.Ratcheting Hose ClampPlier Set (3) 03579500Set of three RatchetingHose Clamp pliers -small / medium / largePatented ratcheting mechanism,provides secure and safelocking and release.Ideal for Brake Hoses & Fuel LinesAlso suitable Radiator and Coolanthoses, aircon hoses etc.Hydraulic Hose Clamp66065000• Rubber sprung clamp, suitable for brake andfuel line hoses.Brake Disc Run Out Set (Magnetic Base & DTI Gauge)07610100• Used for measuring disc run-out.• Powerful magnetic clamp, with on/off lever foreasy removal from surfaces.• Suitable for both flat and roundsurfaces• High quality Dial Test IndicatorGauge with floating scale (07712000).• Universal clamp for DTIwith fine adjustment (07610000).www.sykes-pickavant.com

16COIL SPRING COMPRESSORSCoil Spring Compressor - Screw Type08380000• Set of two threaded screws with hook-type jaws, for removal of coil springs.• Acme threaded screws for fast tightening, releasing, and safety.• Locking screw secures jaws in place.• Safe working load – 9000N (using both screw assemblies).• 270mm max. jaw capacity.• 24mm drive nut size (NB Not designed for use with air powered impact wrenches).Coil Spring Compressor - Screw Type- Set of Three (3) 08380500As per 08380000, but set of three threaded screws and hook-type jaws• For additional safety when working on modern high-tension springs.NB Sykes-Pickavant recommends the use of '838' type spring compressorsin sets of three ( 3) on all occasions, for added safety.Coil Spring Compressor - Economy model66032000• General purpose coil spring compressor, with helical profile hooks.• 170mm max Jaw capacity.( Note : 66032000 - only available whilst stocks last )Mini Suspension Compressor66033000For use on BLMC Mini’s fitted with rubber cone suspension units.• Supplied with both Metric & Imperial extension screws, to cover all applications.Spare Parts :08591600 Extension Screw UNF08591700 Extension Screw MetricMacPherson Strut Nut Remover Set 08920000Set of 4 top nut sockets for popular VAG and Rover front and rear strut applications.• Designed to hold the damper shaft in place during removal and refitting.• 24mm hex drive.Spare Parts :08920170 10mm No.1 socket08920270 12mm No.2 socket08920370 14.5mm No.3 socket08920470 14.5mm No.4 socketwww.sykes-pickavant.com

COIL SPRING COMPRESSORS 17Heavy Duty Coil Spring Compressor089400V2• Safe working load – 15000N.• 24mm hex drive for use with low impact torque air wrenches,or ratchet & socket.• Hex drive incorporates a shear pin for safety overload protection.• Replacement shear pins available (08942400 pack of 5).• Can be used in-situ, or bench mounted in a vice.• Supplied with 2 sets of medium / large colour coded jaws (red/yellow).All jaws feature spring retaining lugs to prevent slippage andpivoting, in order to automatically align to the spring helixduring compression.• Supplied in carton.Standard Jaws :-08902000 Yellow - 80 - 140mm diameter springs (medium).08901000 Red - 100 - 180mm diameter springs (large).Optional Jaws :-08904000 Green - 66 - 108mm diameter springs (small).08903000 Blue - 150 - 236mm diameter springs (x – large).Note : All jaws are supplied as single units, and can beinterchanged for use with conical springs where necessary.Spare parts :-08942400 Shear Pins - pack of 5.08901500 Hex Key / Bolt & Spacers Kit.08940500 Replacement Body Assembly.Heavy Duty Coil Spring Compressor - Complete Set08960000• As per 089400V2, but c/w 4 sets of colour coded jaws.• Supplied in steel storage case.Jaw Reference Jaw Colour Spring Diameter08904000 - Small Green 66 – 10808902000 - Medium Yellow 80 – 14008901000 - Large Red 100 – 18008903000 – X Large Blue 150 – 236NB. All jaws are supplied as singles when sold individually.All jaws are suitable for both 089400V2 & 08960000.Suspension Service Centre08910000A complete set of tools, for safe and efficientcompression of coil springs and McPhersonstrut service work, supplied on wall mountingsteel storage / display panel.08910000 Contents :089400V2 Heavy Duty Coil SpringCompressor, c/w 2 pairs medium& large (yellow & red) jaws.08904000 Small (green) jaws - pair.08903000 X-large (blue) jaws – pair.080500V2 4-way Ball Joint Separator.08060000 Long Fork Type Separator.08380500 Screw Type Coil SpringCompressor – 3 legs.08912500 Storage Panel & Clips.Refer to pp 16 – 18 for product details.www.sykes-pickavant.com

18 COIL SPRING COMPRESSORSHeavy Duty Coil Spring Compressor c/w UniversalMULTIPURPOSE Jaws08400000• Safe Working Load 2250Kg ( 22500N )• Supplied with 1 x pair of Universal MULTIPURPOSE Jaws• Patented innovative shape of jaw design fits mosttypes and sizes of springs• Protective high-tech inserts in jaws for added safety• Jaws diameter : 80 - 200mm covers 90% of applications• Built-in protective accessory for vice-clamping• Large user-friendly adjusting handle for fast jaw positioning• Overload shear-pin for safe operator use• Range of specialist jaw options available - see below• TUV approved• Supplied with full Instructions and Vehicle ApplicationsSpare parts :-08400100 Pair of replacementMULTIPURPOSE Jaws08402400 Safety Shear PinFast AdjustingHandleUniversalMULTIPURPOSEJawsAccessory forVice ClampingOptional Specialist Jaws ( supplied as singles ) :08400400 Extra Large Jaw 180 - 230mm08400500 Extra Small Jaw 80 - 120mm08400600 Jaw for Conical Springs 80 - 145mm08400700 Jaw for BMW E46, E39, Renault Megane 2, Toyota Avensis08400800 Jaw for Mercedes C Class08400900 Jaw for Mercedes E Class, Ren Megane 208401000 Jaws for Citroen C 15, Peugeot Break ( supplied as a pair )08401100 Jaw for Chrysler Grand Voyager ( “counter clock” spring )www.sykes-pickavant.com

COIL SPRING COMPRESSORS19INTERNAL COIL SPRING COMPRESSORfor Wishbone / Multi-Link Suspension08450000Specially designed for vehicles fitted with front or rear wishbone suspension• Designed to fit applications where the access hole in the lower wishbone is as small as 30mm diameter.• Safe Working Load 2500Kg ( 25000N )• Supplied with two pairs of specialist jaws :• Small angled jaws 90 - 120mm• Small flat jaws 60 - 120mm• Optional larger jaws available ( see below )• Unique Torque Safety Key extends functionality and adds safety• 100Nm max torque• Allows for use of an Impact Wrench• TUV approved• Supplied with full instructions and Vehicle ApplicationsSpare parts :-08450500 Torque Safety Key( 100Nm )08451500 Pair of small angled jaws90 - 120mm08451800 Pair of small flat jaws60 - 120mmOptional Specialist Jaws ( supplied as singles ) :08451600 Large angled jaws 120 - 160mm08451700 Large flat jaws 120 - 140mmApplications :The Internal Coil Spring Compressor, fits a wide variety of vehicles with wishbone suspension, including :-• BMW / Citroen / Chrysler / Ford / Honda / Hyundai / Kia / Mazda / Mitsubishi• Peugeot / Renault / Seat / Skoda / Suzuki / Toyota / Volvo / VW• Full Vehicle Applications are supplied with each kit• Applications information is also available as a download via our web-site www.sykes-pickavant.com• For the following models - listed below - the Internal Coil Spring Compressor is recognized as being the only recommendedmethod of removing springs from these modelsCitroen C1 06 - RearC3 03 - RearKia Picanto 07 - RearMitsubishi Colt 07 - RearPeugeot 107 07 - Rear207 07 - Rear1007 07 - RearSkoda Octavia 01 - RearRoomster Scout 08 - RearSuzuki Swift 07 - RearSX4 07 - RearToyota Aygo 07 - RearVW Touran 03 - Rearwww.sykes-pickavant.com

20SUSPENSION TOOLS4 Way Ball Joint Separator - Car / LCV applications 080500V2Universal Ball Joint Separator for Car / LCV applications.Unique 4-way lever design allows for a wide variety of applications.4 options are available, by removing the pin and selecting any of the 4 positionsTapered, slim jaw fork design.4 position, reversible lever for a wider range of application options.Tough black epoxy coating.Specification:Jaw opening - 24 / 30 / 40 / 45mm optionsJaw throat width - 19mmJaw throat depth - 30mmSpare parts :-080511V2 Force Screw080514V2 Retaining PinBall Joint Separator - HGV applications 08070000• Strong, heavy duty body, with strengthened fork and lever,allows for greater force to be applied.• Jaw opening capacity – 70mm, jaw width 36mm.• Can be upgraded to hydraulic power (use 08075000 Upgrade Kit).Specification:Jaw opening 70mmJaw Throat width 36mmJaw Throat depth 50mmSpare Parts :-08071170M24 x 3.0 x 140mm ScrewHydraulic Ball Joint Separator– HGV applications 18070000• Hydraulic version of the 08070000 HGV ball joint separator.• Uses hydraulic power from the SP 1500 series Hydraulic Ram.• Provides up to 8 tonnes of hydraulic pressure.Specification:Jaw opening70mmJaw Throat width 36mmJaw Throat depth 50mmSpare parts :-15000000 Hydraulic Power Ram18071170 Adjusting Screw18071270 Adjusting PlungerHydraulic Upgrade Kit -for use with 08070000 HGV Ball Joint Separator 08075000Upgrade Kit for use with 08070000 HGV Ball Joint Separator -to provide Hydraulic Power• Uses hydraulic power from the SP 1500 series Hydraulic Ram• Provides up to 8 tonnes of hydraulic pressureContents:-15000000 Hydraulic Power Ram18071170 Adjusting Screw18071270 Adjusting Plungerwww.sykes-pickavant.com

SUSPENSION TOOLS 21Ball Joint Separator - Car / LCV applications 66055000Economy model Ball Joint Separator for Car / LCV applications.Specification:Jaw opening – 45mm,Jaw Throat width - 19mmJaw Throat depth - 30mmSpare parts :-08171100 Threaded ScrewBall Joint Separator – Car / LCV applications 66055200• Adjustable screw c/w shear pin, allows for greater flexibility, providing awider range of applications coverage.• Shear pin prevents accidental overload – for safety.Specification:Jaw opening capacity – 45mmJaw width - 22mmBall Joint Separator - Direct Action Type - Car applications66031000Suitable for most popular car applications.Specification:Jaw opening capacity – 50mmJaw Throat width - 19mmJaw Throat depth - 20mmLong Reach BallJoint Splitter 08060000Specification:Length 420mm,Jaw throat width 18mmJaw throat depth 68mmLong reach professionaltool, ideal for ease ofaccess,without beingrestricted by wheelarches.Ball Joint Splitter08160000Specification:Length 250mmJaw throat width 18mmJaw throat depth 68mmStandard professionaltool.Ball Joint Splitter66049000Specification:Length 195mmJaw throat width 15mmJaw throat depth 69mmEconomy model.CV Joint Puller 08090000CV Joint Puller• Specialist tool for the removal of CV Joints onfront wheel drive cars• Avoids removal of the entire drive axle• No need to use a hammer - reduce risk ofdamage to the drive axle• Saves time and costwww.sykes-pickavant.com

22SUSPENSION BUSH TOOLSSuspension Bush Removal & Installation- Individual Model Specific Tools• A new range of individual suspension bush removal and installation tools• Designed for use in-situ - on the vehicle• Each tool is supplied with comprehensive fitting instructions• Spare parts and consumable parts readily available• These tools are NOT designed for use with air or electrically operated impact wrenches• Replacement threaded studs and bearings are available as spare parts kits .• These tools are designed as stand-alone tools for the application described• they are NOT compatible or inter-changeable with the SP 08780000 / 18700000 systemBMW 3 Series ( E36 / E46 ) Rear Trailing Arm Bush Tool 08720100• For removal and installation of rear trailing arm bushes• Suitable for both 'original' bushes and new style 'slotted' bushes• Consumable spares kit : 08720111BMW 5 & 7 Series ( E39 / E38 ) Rear Ball Joint Tool 08720200• For removal and installation of rear suspension ball joints on 5 series and 7 series• Consumable spares kit : 08730111BMW 5 Series Saloon ( E39 ) Rear Axle Carrier Bush Tool 08720300• For removal and installation of rear axle carrier bushes on 5 series saloons 1996 on• Consumable spares kit : 08720311BMW X5 Series ( E53 ) Rear Axle Carrier Bush Tool 08720400• For removal and installation of rear axle carrier mounting bushes X5 ( E53 ) models• Consumable spares kit : 08720311BMW 5 Series Touring ( E39 ) & 7 Series ( E38 ) 08720500• For removal and replacement of rear axle carrier bushes as used on BMW 5 series Touringmodels (E39) and 7 Series (E38) without the need to remove the rear sub-frame assembly.• Consumable spares kit : 08720511Ford Mondeo Rear Sub-Frame Bush Tool 0873010• For removal and installation of rear sub-frame bushes on Ford Mondeo 2001MY( 10/2000 ) onwards• Consumable spares kit : 08730111Ford Focus Rear Wishbone Bush Tool 08730200• For removal and installation of rear wishbone / trailing arm bush on all Ford Focusmodels 1998 onwards• Consumable spares kit : 08730211Ford Fiesta 08730300• For removal and installation of rear axle mounting bushes as used on Ford Fiesta FordKa, Ford Puma models - 1996 on - without the need to remove the trailing linkassembly from the vehicle.• Consumable spares kit : 08730311www.sykes-pickavant.com

SUSPENSION BUSH TOOLS 23Suspension Bush Removal & Installation- Individual Model Specific ToolsRenault Laguna Rear Suspension Bush Tool08750100• For removal and installation of rear axle bushes on Renault Laguna 2 ( 2001 onwards)• Consumable spares kit : tbaVauxhall Vectra B Rear Suspension Bush Tool08710000• For removal and installation of rear trailing arm bushes on GM Vauxhall / Opel Vectra B models• Consumable spares kit : tbaVW / Audi Rear Axle Bush Insertion Tool08760100• for the installation of bonded rubber / plastic type rear axle mountingbushes, on Audi A3 / VW Golf 4 / VW Bora - all models 2001 - 2004• NB - most models were originally fitted with hydraulic type rubber busheswhen new - these can be knocked out manually. This tool is required forfitting the new bonded rubber / plastic type replacement bushes. Always replace in pairs.• Consumable spares kit : 08760111VW Polo Front Control Arm Bush Tool08760200• for removal and installation of the rear bush on the front control arm, as fitted on VW Polo 11/2001onwards / Seat Cordoba 11/2002 onwards / Skoda Fabia 12/1999 onwards - all models• Consumable spares kit : 08760211Universal Suspension Arm Lever08080000• For lowering of the suspension arm, and the separation of suspension components• Reduces the effort required, due to the unique design which uses leverage and the technicians' own bodyweight tocreate the force required.• Adjustable, multi-position swing point allows for variable applications - both LH & RHProduct demonstration video available - download a copy from www.sykes-pickavant.comwww.sykes-pickavant.com

24‘1870’ SERIES SUSPENSION TOOLSUniversal Press Frame c/w Hydraulic Ram 18700000A Universal Tool for the dismantling and installation of suspension parts on the vehicle.• Suitable for Ball Joints, Suspension Bushes and other suspension components.• Powered by the SP 1500 Series Hydraulic Ram• Open frame design, allows parts to be pressed through the base• Universal Press Frame can be used in the following formats• On it's own as a stand alone tool• With individual Press Piece Sets ( see below )• With Universal Press & Pull Sleeve set.Product demonstration video available -download a copy from www.sykes-pickavant.comCertain vehicle models require Model Specific sets of Press Piecesdue to the specific design of the vehicle components.The following Individual Press Piece sets have been developed forsuch circumstances, and should be used in conjunction with theUniversal Press Frame ( 18700000 ) or Universal C Clamp ( 18780200 )BMW E36 / E46 Rear Suspension Bushes18720100Renault Laguna Rear Suspension Bushes **18750100Renault Master / Opel Movano Upper Ball Joint18750200Renault Master / Opel Movano Lower Ball Joint18750300VW Golf 3 Rear Suspension Bushes18760100VW Golf 4 / Audi A2 & A3 Rear Suspension Bushes18760200VW LT & Mercedes Sprinter Ball Joints18760300VW T4 Ball Joints18760400** NB 18750100 - Renault Laguna is supplied with a threaded spindle, nut and bearingThese Individual Press Piece Sets should be used with the Universal Press Frame 18700000 ( above ) or with the Universal C Clamp18780200 ( ref page 25), but can also be used with the Universal Press & Pull Sleeve Set 08780000 ( ref page 26 )www.sykes-pickavant.com

‘1870’ SERIES SUSPENSION TOOLS 25Extension Set for Universal Press Frame 18780100When using the Universal Press Frame 18700000 in conjunction with theUniversal Press & Pull Sleeve Set 08780000, it is recommended to increasethe capacity of the Press Frame, by fitting the Extension Set 18780100 in orderto access the full range of applications available.18780100 Extension Set18780100 fitted to UniversalPress Frame for use with Press& Pull Sleeve KitsUniversal C Clamp 18780200A Universal Clamp for the dismantling and installation of suspension parts - on the vehicle.• A specially designed Universal Clamp for use with the '878' / '879' Series Press & Pull Sleeve Kits• Designed to allow greater access in restricted situations, and where the Universal Press Frame ( 18700000 )is not suitable.• A special 'trapezoidal' threaded screw, allows for the application of greater force, and the tool can, therefore, be usedwith Impact Air Wrenches, as well as with standard ratchets / wrenches etc, thus allowing for both greater speed of useand greater force to be applied making the job of removing stubborn bushes even easier.• This new C-Clamp tool is also capable of accepting the renowned Sykes-Pickavant 1500 Series Hydraulic Ram, whichallows for extremely smooth application of force where avoiding risk of damage to components is critical.Product demonstration video available - download a copy from www.sykes-pickavant.comwww.sykes-pickavant.com

26SUSPENSION BUSH REMOVAL & INSTALLATIONUniversal Press & Pull Sleeve Set 08780000For the Removal and Installation of Bushes, Bearings, Seals etc• Universal tool set for extracting and drawing-in of bushes, bearings, seals etc• Fully universal applications for Car & LCV• Press & Pull Sleeve Set can be used in the following formats• on it's own as a stand alone set of tools• with a workshop press• with the Universal Press Frame 18700000 ( refer page 24 )• with model specific Press Piece sets ( refer page 24 )• Supplied in moulded storage case• All components available individually as spare partsSpindle & Sleeves application exampleProduct demonstration video available -download a copy from www.sykes-pickavant.comContents :20 x Press Sleeves in 2mm diameter steps• Inside diameter from 34 - 72mm in 2mm steps• Outside diameter from 44 - 82mm in 2mm steps4 x Pulling Spindles with Nuts and Thrust Bearings• M10 / M12 / M14 / M164 x Step Plate Discs• Disc 1 for 34, 42, 50, 58, 66mm sleeves• Disc 2 for 36, 44, 52, 60, 68mm sleeves• Disc 3 for 38, 46, 54, 62, 70mm sleeves• Disc 4 for 40, 48, 56, 64, 72mm sleevesNut & ThrustBearing onSpindle08780000 & Workshop Press 08780000 on Mercedes C Class W 20308780000 & Universal Press Framewww.sykes-pickavant.com

SUSPENSION BUSH REMOVAL & INSTALLATION27Universal Press & Pull Sleeve Set - SUV / LCV Kit 08790000• For use as an add-on to the Standard Press & Pull Sleeve Kit ( 08780000 )• Allows access to a wider range of vehicles, particularly SUV's and LCV'sContents :8 x Press Sleeves in 2mm diameter steps• Inside diameter from 82 - 88mm, and from 98 - 104mm• Outside diameter from 92 - 98mm, and from 108 - 114mm2 x 20mm Pulling Spindle Adaptors with Thrust Bearings• M204 x Step Plate Discs• Disc 1• Disc 2• Disc 3• Disc 4Universal Press & Pull Sleeve Set - Commercial Vehicle Kit 08797500• Complete kit for SUV / LCV / PSV / HGVContents :20 x Press Sleeves in 2mm diameter steps• Inside diameter from 74 - 112mm in 2mm steps• Outside diameter from 84 - 122mm in 2mm steps4 x Pulling Spindles with Nuts and Thrust Bearings• M10 / M12 / M14 / M162 x 20mm Heavy Duty Pulling Spindle Adaptors with Thrust Bearings• M204 x Step Plate Discs• Disc 1• Disc 2• Disc 3• Disc 408797500 Press & Pull Sleeve Set can be used in the following formats• on it's own as a stand alone set of tools• with a workshop press• with the Universal Press Frame 18700000 ( refer page 24 )• with model specific Press Piece sets ( refer page 24 )• Supplied in moulded storage case• All components available individually as spare partsUpgrade Set - to upgrade from 08790000 to complete 08797500 08795000• An upgrade set, for owners of the SUV / LCV kit ( 08790000 )who wish to upgrade to the full contents of the HGV kit ( 08797500 )www.sykes-pickavant.com

28 HUB PULLINGHydraulic Hub Puller 18500000• Universal hydraulic hub puller, uses power from the SP1500 series ram (8 tonnes).• Compatible with 3 , 4 , 5 & 6 stud wheel hubs.• Supplied with threaded studs/extended nuts to cover 5 popular thread patterns.3 x stud pattern threads.2 x extended nut pattern threads.• Colour coding of studs/extended nuts, makes for easy identificationand component selection.• Vehicle model/stud pattern applications chart provided.Applications :Can be used with the followingthread forms :-• M12 x 1.25 studs• M12 x 1.5 studs• M14 x 1.5 studs• M12 x 1.25 extended nuts• M12 x 1.5 extended nuts• Full vehicle applications chart suppliedSpare parts :-15000000 Hydraulic Power Ram18500100 Puller Plate18500200 Convertor c/w locking nut18500400 Shoulder nuts18500500 M12 x 1.25 Stud - Brown18500600 M12 x 1.5 Stud - Red18500700 M14 x 1.5 Stud - Green18500800 M12 x 1.25 Extended Nut - Yellow18500900 M12 x 1.5 Extended Nut - BlueNote : Hydraulic Hub Puller Kit 18500000, can also be used with Heavy Duty Slide Hammer( 08530900 ) where shock action is requiredLCV Impact Hub Puller18550000LCV Hub Puller• To fit 5 and 6 stud hubs on LCV hubswith a pitch circle of 90-170mm• Six sets of Male & Female connector rods• M12X1.25 / M14X1.5 / M16X1.5 Male Rods• M12X1.5 / M14X2.0 / M18X1.5 Female RodsApplications :• Citroen Jumpy / Dispatch / Jumper / Relay,• Ford Transit• Fiat Ducato• Iveco Daily11 / 111,• LDV Maxus• Mercedes Sprinter / Vito,• Nissan Primastar• Opel Movano / Vivaro• Peugeot Boxer / Expert• Renault, Master / Trafic• VW LT / TransporterSupplied with Heavy Duty 4.3kg Slide HammerFully comprehensive LCV vehicle applications chart providedNote : LCV Hub Puller Kit 18550000, can also be used with the SP1500 HydraulicPower Ram where controlled application of force is required”Spare parts :-08530900 Heavy Duty Slide Hammer18500100 Hub Puller Plate18500200 Ram Convertor c/w lock nut18500400 Shoulder Nut18500500 M12 x 1.25 Stud18500700 M14 x 1.5 Stud18500900 M12 x 1.5 Extended Nut18501000 M16 x 1.5 Extended Nut18501100 M18 x 1.5 Stud18501900 M14 x 2.0 Studwww.sykes-pickavant.com

HUB PULLING 29A new range of Hub Pullers for Cars and Light Commercials, featuring the newly designed Hub Puller Plate(08530800) which has been specially designed to meet the application requirements of modern vehicles.The new Hub Puller Plate has three unique new features 08530800• It has an interchangeable adaptor which allows it to be used in three different formats, depending on the user's requirements:-• Mechanical Screw 5/8” UNF thread, 24mm Hex Drive• Slide Hammer 5/8” UNF thread, 1.6kg Hammer Weight• Hydraulic Ram (15000000), 8 tonnes force• It has a specially enlarged central dome to accommodate larger wheel hub caps ( eg Ford Focus ) as found onmany modern vehicles• It has been designed with an extended spread pattern, to accommodate up to 175mm stud circle diametersMechanical Hub Puller 08530000• 08530800 Hub Puller Plate• 08531200 Adaptor for Mechanical Screw• 08531100 Mechanical Screw 5/8”UNF x 4” x 24mm HexSlide Hammer Hub Puller 08530600• 08530800 Hub Puller Plate• 08531200 Adaptor for Slide Hammer• 08530700 Slide Hammer 5/8”UNF x 1.6KgHydraulic Hub Puller 08531600• 08530800 Hub Puller Plate• 15000000 Hydraulic Ram c/w Nose Piece08530800 Specifications :Spread175mmStud Hole Diameter 14mmHub Centre Diameter (max) 72mmHub Centre Depth (max) 23mmThread11/2”BSWCustomers who purchase any version of the new Hub Puller(i.e. 08530000 or 08530600 or 08531600) can easilyupgrade to any other version simply by purchasing the appropriatecomponents.08531100 Mechanical Screw08530700 Slide Hammer15000000 Hydraulic Ram12731100 Impact Screw08251900 Impact Handle08531200 Adaptor for Slide Hammerwww.sykes-pickavant.com

30 HUB PULLINGHydraulic & Mechanical Hub Puller Kit12730600Variable Stud Hydraulic Hub Puller Kit, c/w Impact Screw & 5 LegsCan be used on a variety of wheel stud pattern applications- 4, 5, 6 stud hubs, with pitch circle up to 203mm.• 1500 Series Hydraulic Power Ram allows for smooth, progressiveapplication of up to 8 tonnes of force.• Fine pitch thread for easy adjustment.• Floating plunger with free moving legs, enables quick and easyattachment to vehicle hubs.• Can be used in 3, 4 or 5 leg combinations.• Heavy duty force screw with impact handle included, where shockaction is required to 'break' stubborn hubs.• Supplied in steel storage case.Specification:Leg Reach :158mmSpread Capacity : 203mmStud Hole Diameter : 15.8mmPuller Plate Thread : 1.1/2” BSWHydraulic Ram Thread ; 1.1/2” BSWImpact Screw Thread : 1.1/2” BSWContents :15000000 Hydraulic Power Ram15242200 Ram Extension(2”/50mm)15002700 Ram Nosepiece12731200 Puller Ring Plate12731100 Impact Force Screw08251900 Shock Handle08251400 Legs (5 off)Heavy Duty Slide Hammer Assembly ( 4.1kg )08530900For when greater impact is required.Kit ref 12730600 provides a versatile solution to a variety of HubPulling problems,but can be further enhanced with theaddition of our Heavy Duty Slide Hammer (08530900)which is fully compatible, and can be fitted directly intothe Puller Ring Plate.The component parts of the Variable Stud Hub Puller, can also besupplied in alternative formats :-Hydraulic Hub Pullers c/w 1500 series Hydraulic Power Ram12730300 Hydraulic Hub Puller c/w 3 legs12730400 Hydraulic Hub Puller c/w 4 legs12730500 Hydraulic Hub Puller c/w 5 legsAll of the above can also be used with Heavy Duty Slide Hammer 08530900Mechanical Hub Pullers c/w Impact Force Screw and Shock Handle08250300 Mechanical Hub Puller c/w 3 legs08250400 Mechanical Hub Puller c/w 4 legs08250500 Mechanical Hub Puller c/w 5 legsAll of the above can also be used with Heavy Duty Slide Hammer 08530900www.sykes-pickavant.com

HUB PULLING 31Mechanical Hub Puller Kit for HGV08220600Variable Stud Hub Puller for 4, 5, & 6 Stud HubsFor use on Commercial Vehicles with a Wheel Stud pitch circle diameter up to305mm, and Stud Diameter up to 22mm• Floating plunger with free moving legs, enables quickand easy attachment to vehicle hubs• Heavy duty force screw with impact handle included,where shock action is required to 'break' stubborn hubs• Fine pitch force screw thread for easy adjustment andsmooth application of force• Use in 3, 4, 5, or 6 leg combinations• Supplied in steel storage caseContents :Leg ReachSpecification:211mm12731100 Impact Force ScrewSpread Capacity 305mmStud Hole Diameter 23mm08251900 Shock Handle08221200 Puller Ring PlatePuller Ring DiameterImpact Screw Thread152mm1.1/2” BSW08221400 Legs ( 6 off )Puller Ring Thread 1.1/2” BSWImpact Screw Drive Nut 1.3/16”Upgrade to Hydraulic Pulling Power• 15000000 Hydraulic Ram + 15242200 ExtensionUpgrade to Slide Hammer Power• 08530900 Heavy Duty Impact Slide Hammer (4.1Kg / 10lbs )Variable Stud Hub Puller for 3 Stud Hubs08220300Specification as per 08220600• Supplied with 3 legs• Shipped in a box carton08221400 Additional Puller Legs to upgrade for 4, 5, or 6 leg applicationswww.sykes-pickavant.com

32 STEERING & SUSPENSION PULLERSHydraulic Drop Arm Puller 15050000• Hydraulic puller for removing steering box drop arms• Uses power from the SP 1500 series Ram• Ideal for Ford Transit and Land Rover applicationsSpecification:Jaw spread capacity – 60mmJaw reach capacity - 80mmSpare parts :-15000000 Hydraulic Power Ram15050270 Bottom Jaw Plate ( C Plate )15050370 PillarWheel Bearing Remover Kit - Ford Transit08252500• For the removal of Front Wheel Bearings from Ford Transit wheel hubs.• For the removal of the Hub Assembly from the suspension leg.• Can also be used to remove stubborn brake discs, with the special Ford Transitadaptor in combination with larger Sykes Pickavant pullers.• Powered by normal air-operated impact wrenches - max 80 psi. constant pressureContents :• Bearing Separator - capacity 20 - 105mm• Reaction plate and pillars to create pulling frame• Ford Transit Hub Separator plate• Special Ford Transit Adaptor allows pulling forceto be applied to hub centre• Impact Force ScrewSpare Parts :09510000 Bearing Separator09511500 Separator Rod c/w Nuts & Washers08252670 Transit Reaction Plate08252770 Reaction Plate Rod c/w Nuts & Washers08252870 Transit Hub Adaptor - Small08252970 Transit Hub Adaptor - Large08251900 Impact Screw Handle12731100 Impact Screw01540500 Impact Drive Socket - 30mm HexBrake Disc Puller - Ford Transit 08341000• For the removal of Front Wheel Discs on Ford Transit front hubs.• Also suitable for the removal of Rear Brake Drums on Ford Transit.• Heavy Duty 3 leg puller with a 4 ton capacity.• Legs have three height adjustment positions for ease of access.• Large 24mm heavy duty force screw fitted with ball bearing tip and hex drive.• Special Ford Transit adaptor allows pulling force to be applied tothe centre of the hub.• Can be used as a general purpose three leg manual puller• Spread - 350mm, reach - 380mm.Spare Parts :08291100 Force Screw08291300 Triple Beam08331400 Leg Assembly15404170 Ford Transit Adaptorwww.sykes-pickavant.com

STEERING & SUSPENSION PULLERS33Universal Bearing Ring Puller08100000• For the removal of bearings, races, sleeves etc.• Ideal tool for the removal of bearing rings from hubs, axles etc• Removes the need for cutting tools - greatly reduces bearing ring removal time• Unique patented design - specially designed cutting edges on puller legs• Legs 'cut' and are pressed into the radius behind the bearing ring• 'Loose / Tight' pulling principal means force is applied evenly at all pointson the bearing ring• Suitable for all types of bearings and rings from 40 - 60mm diameter• Supplied in plastic toolbox for safe storageSpare parts :-08351070 Puller Leg08351170 Force Screw09803900 Spindle End PieceSpecification:1 tonne pulling capacitySpread - 95mmReach - 118mmBearing RingProduct demonstration video available -download a copy from www.sykes-pickavant.comHydraulic King Pin Press Kit – HGV applications11200000• Hydraulic power supplied by SP Loadstar 20 tonne Pump & Ram• Wide variety of HGV applicationsContents:-• 20 tonne Pump & Ram• Press Frame – capacity 165mm spread, 450mm depth.• Auto-Grip Collar• 18mm , 21mm , 25mm extension pinsSpare Parts :20039500 Press Frame20014900 Auto-Grip Collar20014700 Extension Pin 18 x 75mm20014800 Extension Pin 20 x 150mm20014400 Extension Pin 25 x 150mm20017100 Hydraulic Hand Pump20012900 Hydraulic Ram - 20 tonnewww.sykes-pickavant.com

34 WHEEL & TYRE REMOVALPneumatic Wheel Lifter34198000Pneumatic Wheel Lifter• For efficient, quick, and safe changing of wheels.• Helps to comply with regulations regarding theworking environment and safety in the workplace.Features :• Lifts wheels in less than 10 seconds and in one continuous movement.• Stops precisely at the desired position• Additional compressed air outlet to connect an air wrench• Wheels rest on 2 rollers making it easy to turn the wheel until the correctposition is found• The rollers are displaced from the main pneumatic piston, giving free accessto the wheel bolts• Sturdy, lockable wheels make it easy to move the wheel lifter aroundthe workshopBenefits :• Reduces risk of injury due to heavy lifting - enhances Health & Safety procedures• One-man operation• Ideal for lifting SUV/4WD/Van Wheels and TyresSpecifications :• Suitable for Wheel / Tyre overall diameters from 13" - 24" ( 325 - 600m )• Lifting capacity up to 65 kg• Max. lifting height 830 mm• Compressed air capacity 6-10 kg/cm2• Width : 700 mm• Height : 1880 mmWheel Handling Trolley34199000Wheel Handling TrolleyFor mounting and dismounting large wheelson SUV's/4WD's/Vans/Trucks etc.• Makes wheel handling operations safer, easier, and more convenient.• Rotating rollers make it easy to turn the wheel until the correct positionIs found• The rollers can be fitted in 3 positions for different wheel sizesSpecifications :• Roller positions :• Outer - 620mm / Middle - 450mm / Inner 290mm• Length of rollers: 220 mm• Lifting height: approx.100 mm• Max.weight of wheel: 150 kg• Min. diameter of wheel: Ø600 mm• Max. diameter of wheel: Ø1100 mmwww.sykes-pickavant.com

WHEEL & TYRE REMOVAL35Cordless Impact Wrench 19.2v 90802600Features :• Heavy Duty 600Nm Impact Wrench• Achieves maximum torque of 600Nm ( 443 ft lbs ) in 7 seconds• Fan cooled motor with convenient forward / reverse switch• Cushioned grip and light weight ( only 2.8Kg / 6 lbs ) for outstanding ergonomics• Supplied in blow-moulded case, with TWO batteries and charging base• Specification :• 1/2 square drive• maximum torque ( reverse mode ) - 600Nm (443 ft lbs)• Speed : 1800 RPM• Impacts : 2400 blows per minute• Battery : Sanyo 1.7Ah / 19.2v• Charge time : 60 minutes• Weight : 2.8 Kg ( 6 lbs )Spare parts :-908026BP Replacement Battery Pack908026CB Replacement Charging BaseHi-Torq Air Impact Wrench 1/2” sq dr - Composite Body92420000Features :• Ultra High Performance Impact Hammer for extreme usage applications• 900Nm / 660ft.lbs ( 1290Nm / 945 ft.lbs reverse )• Composite Body Housing for reduced weight and increased stability• 2.2kgs / 4.85lbs• Twin-Line Double Hammer Impact - Fast Torque Build-Up• Power control trigger system• 4 Forward Control Steps - 1 ReverseSpecification :• square drive• 8000 rpm• 184mm / 7.2” length• Air Consumption - 113 l/min @ 6.2 bar ( 4.0 cfm @ 90psi )• BSP inlet• 900Nm / 660ft.lbs forward torque• 1290Nm / 945 ft.lbs reverse torque• Full Instructions included• Spare Parts list includedwww.sykes-pickavant.com

36WHEEL & TYRE TOOLSAlloy Wheel Nut Socket Set 69050000Plastic coated impact sockets to minimise marking /scratching of alloy wheels, when the wheel nutsare heavily recessed into the wheel design.Contents :Set of 5 slim deep wheel nut impact sockets -1/2" sq dr. 17 - 19 - 21 - 22 - 24mm hexTyre Tread Depth Gauge 03280000• MOT approved gauge, c/w pocket clip.• Measures 0 – 26mm in 1mm increments.• Inc. 1.6mm depth measurement for MOT regulations.Digital Tyre Tread Depth Gauge 07650000• Digital Tyre Tread Depth Gauge 0 - 25mm / 0 -1"• Large LCD Display• Hardened and tempered stainless steel gauge.• Metric or imperial read-out.• Zero setting for comparatibe measurements.Specification:Range 0 - 25mm / 0 - 1"Resolution 0.01mm / 0.0005"Accuracy 0.05mm / 0.0002"Tyre Pressure Gauge – Dial Type 66074000• Shock protected dual-scale gauge, manufactured to BS EN 12645.• 62mm diameter gauge.• Scales: - 0 – 50 psi. / 0 – 3.5 bar.Tyre Pressure Gauge – Pencil Type 66074500• Metal gauge with valve core remover and pocket clip.• 120mm pencil gauge.• Scales: - 6 – 50 psi. / 0.5 – 3.4 bar.Heavy Duty Power Bars• Manufactured from Chrome Vanadium steel• Suitable for the most rugged of working environments• Replacement Impact Square Drive supplied with each Power Bar88005000 1/2” sq dr x 600mm Heavy Duty Power Bar88007500 3/4” sq dr x 1000mm Heavy Duty Power Bar88010000 1” sq dr x 1000mm Heavy Duty Power BarSpare Parts :88005100 1/2” Replacement Impact square drive head88007100 3/4” Replacement Impact square drive head88010100 1” Replacement Impact square drive headwww.sykes-pickavant.com

INDEX3701610600 14 08710000 2302150000 15 08720100 2202160000 2 08720200 2202210000 2 08720300 2202260000 2 08720400 2202340000 2 08720500 2202560000 2 08730100 2202700000 4 08730200 2202700100 4 08730300 2202700200 4 08750100 2302700800 4 08760100 2302700900 4 08760200 2302703100 - 02705000 5 08780000 2602705100 - 02707300 5 08790000 2702725000 3 08795000 2702729500 3 08797500 2702730000 2 08901000 1603280000 36 08902000 1603480000 9 08903000 1603481100 9 08904000 1603511000 14 08910000 1703530000 9 08920000 16035590V2 9 089400V2 1703559500 9 08960000 1703559600 9 11200000 3303560000 14 12018 0210 -12018 0220 803570000 15 12018 0345 803575000 15 12018 0346 803579500 15 12018 8416 803590000 14 12730300 30036100V2 10 12730400 30036105V2 - 036122V2 11 12730500 3003619000 11 12730600 3003619100 11 15050000 3203619400 10 15541000 32036195V2 11 18070000 2003619600 11 18500000 2803619700 11 18550000 2803619800 10 18700000 2403619900 10 18720100 2403650000 11 18750100 2403701100 14 18750200 2403701200 14 18750300 2407610000 15 18760100 2407610100 15 18760200 2407650000 36 18760300 2407712000 15 18760400 24080500V2 20 18780100 2508060000 21 18780200 2508070000 20 34198000 3408075000 20 34199000 3408080000 21 34500000 608090000 21 34600000 708100000 33 66031000 2108160000 21 66032000 1608220300 31 66033000 1608220600 31 66049000 2108250300 30 66050000 908250400 30 66050100 908250500 30 66055000 2108252500 32 66055200 2108341000 32 66065000 1508380000 16 66066000 1408380500 16 660665V2 1008400000 18 66074000 3608450000 19 66074500 3608530000 29 66092500 208530600 29 69050000 3608530700 29 88005000 3608530800 29 88007500 3608530900 30 88010000 3608531600 29 90802600 3592420000 35270' Brake Pipe Flaring Kit 4270' Die Sets 5270' Punches 5Alloy Wheel Nut Set 36Ball Joint Remover - 4 way 20Ball Joint Separator 20Ball Joint Separator - Direct Action 21Ball Joint Splitter - Long 21Ball Joint Splitter - Short 21Ball Joint Splitter - Std 21Bearing Ring Puller 33Bendix Pentagon Socket 14Brake & Fuel Line Clamp 15Brake Bleeder Bottle 9Brake Bleeder Bottle Dual Circuit 9Brake Bleeder Cap Set 8Brake Bleeder Drain One 7Brake Bleeder Drain Twin 6Brake Bleeder Plastic Trolley 8Brake Bleeder Univ Cap 349 / 355 9Brake Bleeder Univ Cap 358 9Brake Bleeder Upgrade Kit 8Brake Bleeding Adaptor 8Brake Bleeding Universal Adaptor 8Brake Disc Run Out Set 15Brake Fluid Auto Filler 9Brake Fluid Tester 9Brake Hose Clamps (2) 15Brake Pin Punch Set 14Brake Pipe Corrosion Tool 2Brake Shoe Spring Tool 14Brake Spring Plier 14Caliper Bolt Hex Wrench 7mm 14Caliper Bolt Torx Bit TX50 - Transit 14Caliper Piston Windback Cube 14Caliper Piston Windback Tool - Basic RH Set 10Caliper Piston Windback Tool - Budget Model 10Caliper Piston Windback Tool - LH Set 11Caliper Piston Windback Tool - RH & LH Master Set 11Caliper Piston Windback Tool - RH Set 11Caliper Piston Windback Tool Air Assisted 10Coil Spring Compressor - Heavy Duty 17Coil Spring Compressor - Internal 19Coil Spring Compressor - Multipurpose 18Coil Spring Compressor - Screw Type 16Coil Spring Compressor General Purpose 16Coil Spring Jaws large 17Coil Spring Jaws medium 17Coil Spring Jaws x-large 17Coil Spring Jaws small 17CV Joint Puller 21Digital Tyre Tread Depth Gauge 36DTI Gauge 15Flaremaster 3Flaremaster Kit 3GM Vectra Bush Remover 23HGV Ball Joint Separator 20HGV Ball Joint Separator - Hydraulic 20HGV Ball Joint Separator - upgrade kit 20Hub Plate 29Hub Puller 29Hub Puller - HGV 31Hub Puller - HGV 31Hub Puller - Hydraulic 29Hub Puller - Hydraulic 30Hub Puller - LCV 28Hub Puller - Mechanical 30Hydraulic Drop Arm Puller 32Hydraulic Hose Clamp 15Hydraulic Hub Puller 29Hydraulic King Pin Press 33Impact Wrench - Cordless 35Impact Wrench - Hi Torq 35Individual Adaptors for 361 Series 10MacPherson Strut Nut Remover Set 16Magnetic Base 15Mini Pipe Cutter 2Mini Suspension Compressor 16Pipe Aid Pliers 2Pipe Bender 2Pipe Deburring Tool 2Piston Windback Tool - Restricted Access 10Piston Windback Tool Body & Screw LH 11Piston Windback Tool Body & Screw RH 11Plastic Hose Clamp Plier Set 15Power Bar 1" 36Power Bar 1/2" 36Power Bar 3/4" 36Press & Pull Sleeve Set - Car 26Press & Pull Sleeve Set - HGV 27Press & Pull Sleeve Set - SUV/LCV 27Press & Pull Sleeve Upgrade Set 27Press C Clamp 25Press Frame c/w Hydraulic Ram 24Press Frame Extension Set 25Press Piece Set BMW E36 / E46 24Press Piece Set Renault Laguna 24Press Piece Set Renault Master 24Press Piece Set Renault Master 24Press Piece Set VW Golf 3 24Press Piece Set VW Golf 4 24Press Piece Set VW LT / Sprinter 24Press Piece Set VW T4 24Ratcheting Hose Clamp Plier Set 15Slide Hammer 30Slimline Adaptor Set of 03619800 10Suspension Arm Lever 23Suspension Bush Tool BMW 3 22Suspension Bush Tool BMW 5 & 7 22Suspension Bush Tool BMW 5 Saloon 22Suspension Bush Tool BMW X5 22Suspension Bush Tool BMW 5 Touring 22Suspension Bush Tool Ford Mondeo 22Suspension Bush Tool Ford Focus 22Suspension Bush Tool Ford Fiesta 22Suspension Bush Tool Renault Laguna 23Suspension Bush Tool VW Golf 4 23Suspension Bush Tool VW Polo 23Suspension Service Centre 17Telescopic Pipe Cutter 2Transit Bearing Puller 32Transit Brake Disc Puller 32Tyre Pressure Gauge - Gauge Type 36Tyre Pressure Gauge - Pencil Type 36Tyre Tread Depth Gauge 36Vacuum Brake Bleeder 9Wheel Bearing remover Ford Transit 32Wheel Lifter 34Wheel Trolley 34www.sykes-pickavant.com

Churchbridge Works - Walsall Road, Cannock, Staffordshire, UK. WS11 8JRTel: +44 (0) 1922 702222 Fax: +44 (0) 1922 702223 E-mail: sales@sykes-pickavant.comSP09/01-BRAKE